Embedded Systems Design Using The Msp430fr2355 Launchpadtm

This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach. LEARN BY EXAMPLE – This book is designed to teach the material the way it is learned, through example. Every concept is supported by numerous programming examples that provide the reader with a step-by-step explanation for how and why the computer is doing what it is doing. LEARN BY DOING – This book targets the Texas Instruments MSP430 microcontroller. This platform is a widely popular, low-cost embedded system that is used to illustrate each concept in the book. The book is designed for a reader that is at their computer with an MSP430FR2355 LaunchPadTM Development Kit plugged in so that each example can be coded and run as they learn. LEARN BOTH ASSEMBLY AND C – The book teaches the basic operation of an embedded computer using assembly language so that the computer operation can be explored at a low-level. Once more complicated systems are introduced (i.e., timers, analog-to-digital converters, and serial interfaces), the book moves into the C programming language. Moving to C allows the learner to abstract the operation of the lower-level hardware and focus on understanding how to “make things work”. BASED ON SOUND PEDAGOGY - This book is designed with learning outcomes and assessment at its core. Each section addresses a specific learning outcome that the student should be able to “do” after its completion. The concept checks and exercise problems provide a rich set of assessment tools to measure student performance on each outcome.

Learn about designing, programming, and developing with the popular new Texas Instruments family of microcontrollers, the MSP430 series with this new book from Chris Nagy. This product line is experiencing explosive growth due to its low-power consumption and powerful features, but very little design and application information is available other than what is offered by the manufacturer. The book fills a gap in the technical literature for embedded systems engineers by offering a more complete combination of technical data, example code, and descriptive prose than is available from the manufacturer reference information, and is useful to both professionals and hobbyists. Intended for embedded engineers who are new to the embedded field, or for the thousands of engineers who have experience with other microcontrollers (such as PICs, 8051s, or Motorola HC0x devices) but are new to the MSP430 line, Chris Nagy offers a thorough and practical description of the device features, gives development guidelines, and provides design examples. Code examples are used in virtually every chapter and online. The book is divided into three sections: the first section provides detailed descriptions of the devices themselves; the second describes hardware/firmware development for the devices; the third is designed to incorporate information from the first two, and provide guidelines and examples of designs. Get up-to-speed on the TI MSP430 product family's features and idiosyncrasies A 'hand-holding' reference to help get started on designs

In this new edition the latest ARM processors and other hardware developments are fully covered along with new sections on Embedded Linux and the new freeware operating system eCOS. The hot topic of embedded systems and the internet is also introduced. In addition a fascinating new case study explores how embedded systems can be developed and experimented with using nothing more than a standard PC. * A practical introduction to the hottest topic in modern electronics design * Covers hardware, interfacing and programming in one book * New material on Embedded Linux for embedded internet systems

Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

Eager to develop embedded systems? These systems don't tolerate inefficiency, so you may need a more disciplined approach to programming. This easy-to-read book helps you cultivate a host of good development practices, based on classic software design patterns as well as new patterns unique to embedded programming. You not only learn system architecture, but also specific techniques for dealing with system constraints and manufacturing requirements. Written by an expert who's created embedded systems ranging from urban surveillance and DNA scanners to children’s toys, Making Embedded Systems is ideal for intermediate and experienced programmers, no matter what platform you use. Develop an architecture that makes your software robust and maintainable Understand how to make your code smaller, your processor seem faster, and your system use less power Learn how to explore sensors, motors, communications, and other I/O devices Explore tasks that are complicated on embedded systems, such as updating the software and using fixed point math to implement complex algorithms

An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

This textbook serves as an introduction to the subject of embedded systems design, using microcontrollers as core components. It develops concepts from the ground up, covering the development of embedded systems technology, architectural and organizational aspects of controllers and systems, processor models, and peripheral devices. Since microprocessor-based embedded systems tightly blend hardware and software components in a single application, the book also introduces the subjects of data representation formats, data operations, and programming styles. The practical component of the book is tailored around the architecture of a widely used Texas Instrument’s microcontroller, the MSP430 and a companion web site offers for download an experimenter’s kit and lab manual, along with Powerpoint slides and solutions for instructors.

This book provides a thorough introduction to the Texas Instruments MPS432TM microcontroller. The MPS432 is a 32-bit processor with the ARM Cortex M4F architecture and a built-in floating point unit. At the core, the MSP432 features a 32-bit ARM Cortex-M4F CPU, a RISC-architecture processing unit that includes a built-in DSP engine and a floating point unit. As an extension of the ultra-low-power MSP microcontroller family, the MSP432 features ultra-low power consumption and integrated digital and analog hardware peripherals. The MSP432 is a new member to the MSP family. It provides for a seamless transition to applications requiring 32-bit processing at an operating frequency of up to 48 MHz. The processor may be programmed at a variety of levels with different programming languages including the user-friendly Energia rapid prototyping platform, in assembly language, and in C. A number of C programming options are also available to developers, starting with register-level access code where developers can directly configure the device's registers, to Driver Library, which provides a standardized set of application program interfaces (APIs) that enable software developers to quickly manipulate various peripherals available on the device. Even higher abstraction layers are also available, such as the extremely user-friendly Energia platform, that enables even beginners to quickly prototype an application on MSP432. The MSP432 LaunchPad is supported by a host of technical data, application notes, training modules, and software examples. All are encapsulated inside one handy package called MSPWare, available as both a stand-alone download package as well as on the TI Cloud development site: dev.ti.com The features of the MSP432 may be extended with a full line of BoosterPack plug-in modules. The MSP432 is also supported by a variety of third party modular sensors and software compiler companies. In the back, a thorough introduction to the MPS432 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will also find this book very useful. Finally, middle school and high school students will find the MSP432 highly approachable via the Energia rapid prototyping system.