Experimental Characterization Predictive Mechanical And Thermal Modeling Of Nanostructures And Their Polymer Composites

Experimental Characterization, Predictive Mechanical and Thermal Modeling of Nanostructures and Their Polymer Composite focuses on the recent observations and predictions regarding the size-dependent mechanical properties, material properties and processing issues of carbon nanotubes (CNTs) and other nanostructured materials. The book takes various approaches, including dedicated characterization methods, theoretical approaches and computer simulations, providing a detailed examination of the fundamental mechanisms governing the deviations of the properties of CNTs and other nanostructured materials. The book explores their applications in materials science, mechanics, engineering, chemistry and physics due to their unique and appealing properties. The use of such materials is, however, still largely limited due to the difficulty in tuning their properties and morphological and structural features. Presents a thorough discussion on how to effectively model the properties of carbon nanotubes and their polymer nanocomposites Includes a size-dependent analysis of properties and multiscale modeling Outlines the fundamentals and procedures of computational modeling as it is applied to carbon nanotubes and other nanomaterials

This volume is a comprehensive guide to the industrial use of polymer composites. Edited contributions demonstrate the application of these materials for different industrial sectors. The book covers the benefits, future potential, and manufacturing techniques of different types of polymers. Contributors also address challenges in using nanopolymers in these industries. Readers will find valuable insights into the current demand and supply of polymer composites and future scope for research and development in this field of polymer science. The volume presents seven chapters, each exploring a different application of polymer composites. Chapter 1 discusses the use of polymer additives for improving classical concrete and the workability and durability of polymer composite concrete. Chapter 2 explores the use of polymer nanocomposites in packaging, including smart/intelligent packaging, modified atmosphere packaging, and vacuum packaging. Chapter 3 delves into the use of polymer composites in tissue engineering, including manufacturing techniques and various applications. Chapter 4 explores energy storage applications for polymer composites, while Chapter 5 discusses their use in microbial fuel cells. Chapter 6 explores the use of carbon nanotubes in polymer composite gas sensors. Finally, Chapter 7 discusses the use of polymer composites in automotive applications. This is an ideal reference for researchers, scientists, engineers, and professionals in the fields of materials science, polymer science, engineering, and nanotechnology. The content is also suitable for graduate and postgraduate students studying industrial manufacturing.

This book provides a comprehensive account of developments in the area of lightweight polymer composites. It encompasses design and manufacturing methods for the lightweight polymer structures, various techniques, and a broad spectrum of applications. The book highlights fundamental research in lightweight polymer structures and integrates various aspects from synthesis to applications of these materials. Features Serves as a one stop reference with contributions from leading researchers from industry, academy, government, and private research institutions across the globe Explores all important aspects of lightweight polymer composite structures Offers an update of concepts, advancements, challenges, and application of lightweight structures Current status, trends, future directions, and opportunities are discussed, making it friendly for both new and experienced researchers.

The automotive industry has always relied on innovation to drive its growth, with Ford Motor Company at the forefront of this transformation. Today, digital transformation is a key focus, with technologies such as AI, big data, and blockchain being used to improve personalized user experiences, develop connected and autonomous vehicles, optimize supply chains, and transform manufacturing processes. The Master's Program in Technology and Innovation - MTI, offered in partnership between SENAI CIMATEC and Ford, aims to provide professionals with the knowledge and skills needed to succeed in this rapidly changing industry. Through independent research projects and practical experience, the program develops critical thinking and problem-solving skills, and enables professionals to build relationships with key players in the automotive industry. I hope you have great insights to solve your day-to-day challenges when reading this book.

This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.

Nanotechnology in the Automotive Industry explores how nanotechnology and nanomaterials are used to enhance the performance of materials and devices for automotive application by fabricating nano-alloys, nanocomposites, nano coatings, nanodevices, nanocatalysts and nanosensors. Consisting of 36 chapters in 6 parts, this new volume in the Micro and Nano Technologies series is for materials scientists, nanotechnologists and automotive engineers working with nanotechnology and nanomaterials for automotive applications. Nanotechnology is seen as one of the core technologies for the future automotive industry to sustain competitiveness. The benefits that nanotechnology brings to the automotive sector include stronger and lighter materials for increased safety and reduced fuel consumption, improved engine performance and fuel consumption for gasoline powered vehicles due to nanocatalysts, fuel additives and lubricants, and more. Discusses various approaches and techniques such as nanoalloys, nanocomposites, nanocoatings, nanodevices, nanocatalysts and nanosensors used in modern vehicles Presents the challenges and future of automotive materials Explores how nanotechnology and nanomaterials are used to enhance the performance of materials and devices for automotive applications

Advanced Lightweight Multifunctional Materials presents the current state-of-the-art on multifunctional materials research, focusing on different morphologies and their preparation and applications. The book emphasizes recent advances on these types of materials as well as their application. Chapters cover porous multifunctional materials, thermochromic and thermoelectric materials, shape memory materials, piezoelectric multifunctional materials, electrochromic and electrorheological, soft materials, magnetic and photochromic materials, and more. The book will be a valuable reference resource for academic researchers and industrial engineers working in the design and manufacture of multifunctional materials, composites and nanocomposites. Provides detailed information on design, modeling and structural applications Focuses on characteristics, processing, design and applications Discusses the main types of lightweight multifunctional materials and processing techniques, as well as the physico-chemical insights that can lead to improved performance

NANOMATERIALS IN CLINICAL THERAPEUTICS In this rapidly developing field, the book focuses on the practical elements of nanomaterial creation, characterization, and development, as well as their usage in clinical research. Nanotechnology-based applications is a rapidly growing field encompassing a diverse range of disciplines that impact our daily lives. Nanotechnology is being used to carry out large-scale reactions in practically every field of biotechnology and healthcare. The incredible progress being made in these applications is particularly true for the healthcare sector, where they are used in cancer detection and treatment, medical implants, tissue engineering, and so forth. Expansions in this discipline are expected to continue in the future, resulting in the creation of a variety of life-saving medical technology and treatment procedures. The primary goal of this book is to disseminate information on nanotechnology’s applications in the biological sciences. A broad array of nanotechnological approaches utilized in different biological applications are highlighted in the book’s 17 chapters, including the employment of nanotechnology in drug delivery. The first three chapters provide an overview of the history and principles of nanotechnology. The synthesis, characterization, and applications of nanomaterials are covered in the next 10 chapters. The last four chapters discuss the use of nanomaterials in clinical research. Audience The book will be useful for researchers and graduate students in the many areas of science such as biomedicine, environmental biotechnology, bioprocess engineering, renewable energy, chemical engineering, nanotechnology, biotechnology, microbiology, etc.