Explosive Welding Forming And Compaction

The last two decades have seen a steady and impressive development, and eventual industrial acceptance, of the high energy-rate manufact turing techniques based on the utilisation of energy available in an explo sive charge. Not only has it become economically viable to fabricate complex shapes and integrally bonded composites-which otherwise might not have been obtainable easily, if at all-but also a source of reasonably cheap energy and uniquely simple techniques, that often dispense with heavy equipment, have been made available to the engineer and applied scientist. The consolidation of theoretical knowledge and practical experience which we have witnessed in this area of activity in the last few years, combined with the growing industrial interest in the explosive forming, welding and compacting processes, makes it possible and also opportune to present, at this stage, an in-depth review of the state of the art. This book is a compendium of monographic contributions, each one of which represents a particular theoretical or industrial facet of the explosive operations. The contributions come from a number of practising engineers and scientists who seek to establish the present state of knowledge in the areas of the formation and propagation of shock and stress waves in metals, their metallurgical effects, and the methods of experimental assessment of these phenomena.

This monograph consists of two volumes and provides a unified, comprehensive presentation of the important topics pertaining to the understanding and determination of the mechanical behaviour of engineering materials under different regimes of loading. The large subject area is separated into eighteen chapters and four appendices, all self-contained, which give a complete picture and allow a thorough understanding of the current status and future direction of individual topics. Volume I contains eight chapters and three appendices, and concerns itself with the basic concepts pertaining to the entire monograph, together with the response behaviour of engineering materials under static and quasi-static loading. Thus, Volume I is dedicated to the introduction, the basic concepts and principles of the mechanical response of engineering materials, together with the relevant analysis of elastic, elastic-plastic, and viscoelastic behaviour. Volume II consists of ten chapters and one appendix, and concerns itself with the mechanical behaviour of various classes of materials under dynamic loading, together with the effects of local and microstructural phenomena on the response behaviour of the material. Volume II also contains selected topics concerning intelligent material systems, and pattern recognition and classification methodology for the characterization of material response states. The monograph contains a large number of illustrations, numerical examples and solved problems. The majority of chapters also contain a large number of review problems to challenge the reader. The monograph can be used as a textbook in science and engineering, for third and fourth undergraduate levels, as well as for the graduate levels. It is also a definitive reference work for scientists and engineers involved in the production, processing and applications of engineering materials, as well as for other professionals who are involved in the engineering design process.

This report is a guide to the literature on high-velocity metalworking. It consists primarily of abstracts of articles, reports, books, and current research projects on and related to high-velocity metalworking arranged according to technical subject. It covers a survey of the reported work in the field up to about October of 1962. Abstracts of over 700 references have been arranged by subject matter, with cross indexing between subjects. There is also an author index. The eleven major subjects and categories covered in the report are: (1) Energy Sources, (2) Energy Transfer Mediums, (3) Facility Requirements, (4) Tooling Requirements, (5) Equipment Requirements, (6) Forming, (7) Hardening, (8) Explosive Welding, (9) Powder Compaction, (10) Metal Removal, and (11) Material Behavior.

This monograph discusses in detail the compacting conditions and the resultant structure and properties of metals, composites and ceramics. It covers the basic aspects of science and technology of explosive compaction. Comprise chapters on Shock Waves in Matter, Technology of Explosive Compaction, Explosive Compaction of Metallic Powders, Explosive