Fluid Mechanics Of Flow Metering

Flow meters measure the volumetric flow rate in a pipeline. Most meters are based on deriving a signal from the fluid flow and calibrating the signal against the volumetric flow rate. The calibration is done in fully-developed flow, and the same state of flow must exist at the meter’s position when it is in practical use. Because the field of flow metering has been neglected by fluid mechanicists for a long time, this book addresses two major fluid mechanical problems in flow metering: the analysis of signal generation in turbulent pipe flow, which explains the function of the meter beyond a simple calibration, and the possible use of a meter in non-developed flows. These problems are investigated with reference to, and examples from, a variety of meters, e.g. ultrasound cross-correlation meters, vortex meters, and turbine meters. Studying these problems requires consideration of specific phenomena in turbulent non-developed pipe flow, as caused by installations, and finding special solutions with signal processing, both of which are included in the book.

Flow meters measure the volumetric flow rate in a pipeline. Most meters are based on deriving a signal from the fluid flow and calibrating the signal against the volumetric flow rate. The calibration is done in fully-developed flow, and the same state of flow must exist at the meter’s position when it is in practical use. Because the field of flow metering has been neglected by fluid mechanicists for a long time, this book addresses two major fluid mechanical problems in flow metering: the analysis of signal generation in turbulent pipe flow, which explains the function of the meter beyond a simple calibration, and the possible use of a meter in non-developed flows. These problems are investigated with reference to, and examples from, a variety of meters, e.g. ultrasound cross-correlation meters, vortex meters, and turbine meters. Studying these problems requires consideration of specific phenomena in turbulent non-developed pipe flow, as caused by installations, and finding special solutions with signal processing, both of which are included in the book.

There is a tendency to make flow measurement a highly theoretical and technical subject but what most influences quality measurement is the practical application of meters, metering principles, and metering equipment and the use of quality equipment that can continue to function through the years with proper maintenance have the most influence in obtaining quality measurement. This guide provides a review of basic laws and principles, an overview of physical characteristics and behavior of gases and liquids, and a look at the dynamics of flow. The authors examine applications of specific meters, readout and related devices, and proving systems. Practical guidelines for the meter in use, condition of the fluid, details of the entire metering system, installation and operation, and the timing and quality of maintenance are also included. This book is dedicated to condensing and sharing the authors' extensive experience in solving flow measurement problems with design engineers, operating personnel (from top supervisors to the newest testers), academically-based engineers, engineers of the manufacturers of flow meter equipment, worldwide practitioners, theorists, and people just getting into the business. The authors' many years of experience are brought to bear in a thorough review of fluid flow measurement methods and applications Avoids theory and focuses on presentation of practical data for the novice and veteran engineer Useful for a wide range of engineers and technicians (as well as students) in a wide range of industries and applications

There is a tendency to make flow measurement a highly theoretical and technical subject but what most influences quality measurement is the practical application of meters, metering principles, and metering equipment and the use of quality equipment that can continue to function through the years with proper maintenance have the most influence in obtaining quality measurement. This guide provides a review of basic laws and principles, an overview of physical characteristics and behavior of gases and liquids, and a look at the dynamics of flow. The authors examine applications of specific meters, readout and related devices, and proving systems. Practical guidelines for the meter in use, condition of the fluid, details of the entire metering system, installation and operation, and the timing and quality of maintenance are also included. This book is dedicated to condensing and sharing the authors' extensive experience in solving flow measurement problems with design engineers, operating personnel (from top supervisors to the newest testers), academically-based engineers, engineers of the manufacturers of flow meter equipment, worldwide practitioners, theorists, and people just getting into the business. The authors' many years of experience are brought to bear in a thorough review of fluid flow measurement methods and applications Avoids theory and focuses on presentation of practical data for the novice and veteran engineer Useful for a wide range of engineers and technicians (as well as students) in a wide range of industries and applications

This revised edition provides updated fluid mechanics measurement techniques as well as a comprehensive review of flow properties required for research, development, and application. Fluid-mechanics measurements in wind tunnel studies, aeroacoustics, and turbulent mixing layers, the theory of fluid mechanics, the application of the laws of fluid mechanics to measurement techniques, techniques of thermal anemometry, laser velocimetry, volume flow measurement techniques, and fluid mechanics measurement in non-Newtonian fluids, and various other techniques are discussed.

Flow Measurement Handbook is a reference for engineers on flow measurement techniques and instruments. It strikes a balance between laboratory ideas and the realities of field experience and provides practical advice on design, operation and performance of flowmeters. It begins with a review of essentials: accuracy, flow, selection and calibration methods. Each chapter is then devoted to a flowmeter class and includes information on design, application installation, calibration and operation. Among the flowmeters discussed are differential pressure devices such as orifice and Venturi, volumetric flowmeters such as positive displacement, turbine, vortex, electromagnetic, magnetic resonance, ultrasonic, acoustic, multiphase flowmeters and mass meters, such as thermal and Coriolis. There are also chapters on probes, verification and remote data access.

A practical guide to cutting-edge techniques for flow measurement and control Unlike any other book on the subject, this volume employs practical applications to illustrate flow measurement techniques in industrial processes. Drawing on their work at the Oak Ridge National Laboratory, five leading researchers present applications that test the limits of commercial flow instrumentation-in harsh environments, wide rangeability, and a host of challenging situations encountered in research and industry. This approach gives the reader highly effective tools for use in tackling a broad range of difficult flow measurement problems. It offers tremendous insight into what flow measurement is all about, from the underlying principles of the methodologies to state-of-the-art instrumentation-including such innovations as "smart" flow sensors. Introducing terminology, properties, units, and flow meters classification, the book: * Details signal conditioning and analysis techniques that will produce meaningful results * Offers tips on selecting the appropriate method for a given application * Shows how modeling can improve mass flow metering accuracy * Covers flow calibration and standards, as well as issues related to cost, maintenance, and ease-of-use of instruments * Addresses the effect of measurement uncertainty on calibration and field measurements. Clear, concise, and generously illustrated, Flow Measurement Methods and Applications is an invaluable resource for researchers and graduate students in physics, mechanical engineering, chemical engineering, and instrument engineering. It is a must-have reference for anyone wishing to assess flow processes accurately and reliably in the real world.