Ford 289 302 Boss 302 And 351w

'Hot Rod' reports on the Ford small block V-8s during the 60s and 70s. Covering 351W hop-up, bolt on HP, parts for Boss 302, 400hp 289, modifying the 289, 500hp 302, Boss 289, history.

If you have a small-block Ford, then you need this book! This detailed guide covers the step-by-step rebuilding process of the popular small-block Ford engine. Parts inspection, diagnosis, reconditioning, and assembly are outlined in simple text. Hundreds of photos, charts, and diagrams visually walk you through the entire rebuild. You’ll be able to completely disassemble your engine, recondition the block and cylinder heads, then reassemble and install the engine in your vehicle. There’s even a section on how to perform tune-ups to maximize performance and economy. Sections on parts interchanging will help you identify all parts and determine which ones can and can’t be swapped. This is truly a “hands-on” book. Don’t put off your project any longer. Start rebuilding your small-block Ford today!

If there is one thing Ford enthusiasts have learned over the years, deciphering which Ford parts work with which Ford engines is a far more difficult task than with many other engine families. Will Cleveland heads fit on my Windsor block? Can I build a stroker motor with factory parts? Can I gain compression by using older-model cylinder heads, and will it restrict flow? Is there a difference between Windsor 2-barrel and 4-barrel heads? These are just a few examples of common questions Ford fans have. These and many other questions are examined in this all-new update of a perennial best seller. Thoroughly researched and, unlike previous editions, now focused entirely on the small-block Windsor and Cleveland engine families, Ford Small Block Engine Parts Interchange includes critical information on Ford’s greatest small-block engines and goes into great detail on the highly desirable high-performance hardware produced throughout the 1960s, 1970s, and 1980s. By combining some of the best parts from various years, some great performance potential can be unlocked in ways Ford never offered to the general public. Following the advice in Ford Small-Block Engine Parts Interchange, these engine combinations can become reality. You will find valuable information on cranks, blocks, heads, cams, intakes, rods, pistons, and even accessories to guide you through your project. Author George Reid has once again done extensive research to accurately deliver a thorough and complete collection of Ford small-block information in this newly revised edition. Knowing what internal factory engine parts can be used across the wide range of production Ford power plants is invaluable to the hot rodder and swap meet/eBay shopper. Whether building a stroker Cleveland or a hopped-up Windsor, this book is an essential guide.

This revised and updated color edition of How to Rebuild the Small-Block Ford walks you step by step through a rebuild, including: planning your rebuild, disassembly and inspection, choosing the right parts, machine work, assembling your engine, and first firing and break-in.

Learn how to get the most horsepower out of the popular small-block Ford with this all-new full-color guide. The attention of the performance aftermarket has turned to the Coyote platform and swaps, but Ford is a little different than GM and Chrysler in that regard. The sheer size of the Coyote engine is problematic because it is very difficult to fit into any vehicle with shock towers. However, the shock-tower cars are often the most popular cars to modify. As such, the small-block Ford remains a viable option for making a large amount of horsepower in a much more affordable package. In Ford Small-Block Engines: How to Build Max Performance, Ford expert Jim Smart covers all of the major components, including crankshafts, rods and pistons, camshafts, the valvetrain, oiling systems, intakes, carburetors, ignition systems and exhaust systems. Featured are the latest street heads from AFR, Dart, Ford Performance, Edelbrock, and other prominent manufacturers. Aftermarket blocks are also covered extensively from a variety of manufacturers, such as Ford Performance, Dart, Speedmaster, Bill Mitchell Products, and World Products. The basic design of this engine is more than 60 years old, but the aftermarket for this powerplant has grown over the years and is still growing. While the Coyote engine family has earned a strong following, the original Ford small-block engine retains just as strong of a following, with the massive number of these engines still in use throughout the hobby. Whether you want to get started on your build or you just want to learn about the small-block Ford’s capabilities, this book will make a great addition to your library.

This revved up volume addresses high-performance engines, such as the ones found in Mustangs and emphasizes a budget approach to building them. 300 photos.

Of the legendary names in the history of the Ford Mustang, one stands apart: Boss. Originally created to homologate the new Boss 302 engine for SCCA Trans-Am racing, the Boss 302 Mustang was built in limited numbers for the street. Designed by legend Larry Shinoda, the Boss cars were easily distinguished from their less potent stable mates by their unique front and rear spoilers, rear window slats, and the omission of the standard Mustang's (fake) rear fender brake ducts. Also standard was a shaker hood scoop and bold graphics. Though Mustang performance faded to all-time lows as the 1970s rolled on, there was good news on the way. The pairing of the venerable 302 Windsor engine with the new Fox-body platform for the 1979 Mustang might not have seemed significant at the time, but it was the first edition of what would become a performance institution in the late 20th century: the 5-liter Mustang was an overwhelming force on the streets and tracks through the end of its production in 1995. With no small amount of fanfare, Ford is paying homage to its performance past with the re-introduction of the 5.0 liter powerplant in the Mustang GT for 2011.