Gb T 24242 2 2020 Translated English Of Chinese Standard Gbt 24242 2 2020 Gb T24242 2 2020 Gbt24242 2 2020

This Part of GB/T 24242 specifies the designation expression methods, dimensions, shapes, weights and allowable deviations, order content, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of general purpose wire rod in non-alloy steel wire rod for conversion to wire.

This Part of GB/T 24242 specifies the dimensions, shapes, weights and allowable deviations, order content, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of non-alloy steel wire rod for drawn or coldrolled steel wire. This Part is applicable to non-alloy hot-rolled steel wire rod for drawn or cold-rolled steel wire.

This Part of GB/T 24242 specifies the designation expression methods, dimensions, shapes, weights and allowable deviations, order content, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of special purpose wire rod in non-alloy steel wire rod for conversion to wire.

This document defines the degree of consistency between the national standardizing documents and the corresponding ISO/IEC standardizing documents 1. It establishes the general principles and requirements for drafting national standardizing documents based on ISO/IEC standardizing documents. It specifies the drafting steps, relevant elements and rules for the preparation of appendices. The document is suitable for drafting national standardizing documents based on ISO/IEC standardizing documents. When drafted on the basis of standardizing documents published by other organizations, they are used by reference in accordance with the copyright and adoption policies of the corresponding organizations.

This Part of GB/T 38812 specifies the potassium dichromate titrimetric method after decomposition of sample by ferric chloride to determine the metallic iron content. This Part applies to the determination of metallic iron content in direct reduced iron; the determination range (mass fraction): more than 50.00%.

This Part of GB/T 21296 specifies the terms and definitions, type and specification, metrological requirements, technical requirements, production and installation requirements, installation conditions and maintenance requirements, system function and data requirements, test methods, inspection rules, marking, packaging, transportation and storage of full-draught automatic instrument for weighing road vehicles in motion (hereinafter referred to as full-draught WIM).

This Standard specifies the method for determining the content of dichloromethane extracts in pulp. This Standard is applicable to all kinds of pulps except waste pulp. When the sampling volume is 10g, the limit of detection for this method is 0.05%.

This Standard specifies classification and marking, technical requirements, test methods, inspection rules, marks, packaging, transportation, storage and quality certificate, purchase order (or contract) content for copper and copper alloy cold-drawn rod and bar. This Standard is applicable to general purpose round, rectangular, square and regular hexagonal copper and copper alloy cold-drawn rod and bar.