Gb T 32325 2015 Translated English Of Chinese Standard Gbt 32325 2015 Gb T32325 2015 Gbt32325 2015

This Standard specifies technical requirements, measurement methods, evaluation methods and inspection rules for vibration (velocity) of deep groove ball bearings of which nominal outer diameter is greater than 10mm ~ 200mm, and the dimensions are in accordance with 0, 2, 3 diameter series of GB/T 276.

This Standard specifies the terms, definitions, components, materials, grading, code, technical requirements, test methods, inspection rules, packaging, mark, transportation and storage of white Portland cement. This Standard is applicable to the production and application of white Portland cement.

This Part of GB/T 32355 specifies the assessment values of recyclability rate for small and medium three-phase asynchronous motors.

This Standard specifies the boundary dimensions of three-point and four-point contact ball bearings stipulated in GB/T 273.3-2015. This Standard is applicable to the design and type-selection of the bearing.

This Standard specifies the terms and definitions, general requirements, comparative samples, testing equipment, testing method, testing record and defect evaluation, steel plate grade, and inspection report, etc., of electromagnetic automatic ultrasonic testing for thicker steel plates. This Standard applies to the electromagnetic automatic ultrasonic testing for 6mm thickness below boiler, pressure vessels, bridges, construction, shipbuilding, pipelines, steel mold and other steel plates. The steel plate of other specifications can make reference to this Standard.

This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and contract (or purchase order) of titanium-clad copper bar. This standard is applicable to titanium-clad copper bar (hereinafter referred to as composite bar) used in the manufacture of metal anode electrolyzer and other applications produced by hot-extrusion, hot-extrusion stretching, explosive composite, or explosive composite hot-rolling.

This Standard specifies the order content, classification and designation system, dimensions, shapes, weights and tolerances, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of hot-rolled steel H piles.

This Standard specifies the requirements, test methods, inspection rules, and symbols, packaging, transport, storage and quality certificate for the mixed rare earth oxide of ion-absorbed type rare earth ore. This Standard is applicable to the mixed rare earth oxide of ion-absorbed type rare earth ore prepared by using the chemical method, where ion-absorbed type rare earth ore is used as the raw material. The mixed rare earth oxide of ion-absorbed type rare earth ore is mainly used as the raw material for grouping rare earth aggregates or separating single rare earth compounds.