Gb T 4214 3 2023 Translated English Of Chinese Standard Gb T 4214 3 2023 Gbt4214 3 2023

This document applies to household and similar single-unit electric dishwashers, with or without automatic program controls, using hot and / or cold water sources, which may be separated or permanently connected to a water supply or drainage system, intended to be placed against a wall on the floor, embedded or placed under a counter, under a kitchen operating surface or under a sink, and mounted on a wall or on a counter.

This document specifies the product classification, structures, dimensions and deviations, model, technical requirements, test methods, inspection rules, as well as marking, packaging, transportation and storage requirements for glass fiber reinforced plastic duct for highway. This document is applicable to the production, inspection and usage of glass fiber reinforced plastic duct for highway (hereinafter referred to as ¡°glass fiber reinforced duct¡±).

This Document specifies the type, dimensions, technical conditions, marking, labels and signs of hexagon socket countersunk head screws with reduced loadability due to head design. This Document is applicable to hexagon socket countersunk head screws with thread specifications M2~M20; coarse threads; performance levels 8.8, 10.9 and 12.9; groups and performance levels A2-50, A4-50, A2-70, A4-70, A2-80 and A4-80, and Level-A products. NOTE 1: For other size options, see GB/T 2, GB/T 197 and GB/T 3106. NOTE 2: Reduced loadability (related to the combination of countersunk head size and hexagonal penetration depth specified in this Document) implies a limit to the minimum tensile load (see Table 5). NOTE 3: Special attention needs to be paid to ensure that the countersunk head is aligned with the countersunk hole support surface in the assembly.

This document describes the method for determination of effective-recyclable components in paper, board and paper products. This document applies to all kinds of paper, board and paper products; as well as paper-based composite materials such as aluminum-foil paper and coated paper.

This document stipulates the designation representation, order content, size, shape, weight, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of low alloy steel plates with specified low temperature properties for pressure equipment. This document is applicable to the manufacture of low-alloy steel plates (hereinafter referred to as steel plates) ?C with an operating temperature of not less than -70 ??C and a thickness of 5 mm ~ 120 mm ?C for pressure equipment.

This document specifies the environmental parameters and severity levels of machinery products in the environmental condition of warm damp. This document applies to machinery products used in the environmental condition of warm damp. The environmental condition stipulated in this document include the environmental parameters and severity levels that the products are subject to and affected by. Applicable items and levels are selected for various types of products in accordance with the degree of environmental impact to which they are subject.

This document specifies the technical requirements, inspection rules, marking, packaging, transportation and storage requirements for extruded PTFE sleeving for electrical applications, and describes the corresponding test methods. This document is applicable to extruded PTFE sleeving for electrical applications with a maximum service temperature of 250 ?C.

This document specifies the designation representation, order content, size, shape, weight, technical requirements, test methods, inspection rules, packaging, marking and quality certificates of non-alloy steel and alloy steel plates and strips with specified temperature properties for pressure equipment. This document is applicable to the manufacture of steel strips and coil-cut steel plates with a temperature of no less than -20 ¡ãC and a thickness of no more than 25.4 mm for pressure equipment and single-rolled steel plates (hereinafter referred to as steel plates) with a thickness of 3 mm ~ 250 mm.