Gb T 708 2006 Translated English Of Chinese Standard Gbt 708 2006 Gb T708 2006 Gbt708 2006

This Standard specifies the dimensions, shapes, weights and permissible tolerances of cold-rolled steel sheets and strips. This Standard is applicable to cold-rolled wide strip of which the width is not less than 600 mm, its shear sheets and slit wide strip. The single cold-rolled sheets can also reference to this Standard for implementation.

This Standard specifies terms and definitions, classification and code, dimensions, dimension tolerances, shape requirements, measurement of dimensions and shape, weight and rounding off of numerical values of coldrolled steel sheets and strips. This Standard applies to cold-rolled wide strips, slit wide strips and sheets cut from strip of which the rolling width is not less than 600 mm (hereinafter referred to as steel sheets and strips). Steel plates may also refer to this Standard.

This Standard specifies the method principle, apparatus, sampling and sample preparation, test procedures, results calculation and precision etc. of the coke with particle size greater than 60mm and 25mm. This Standard is applicable to the determination of mechanical strength of coke with particle size no less than 25mm. The coke with particle size less than 25mm can also refer to this Standard.

This Standard applies to cold-rolled plates of which the width exceeds or equals to 600 mm, thickness is 0.2 ~ 5mm, and cold-rolled sheets of which the thickness exceeds 3 mm. It is not applicable to narrow strips of which the direct rolling width is less than 600 mm.

This Standard specifies the requirements, test methods, inspection rules, marks, packaging, transport and storage for biaxially oriented polyamide (nylon) film. This Standard is application to a polyamide (nylon) film obtained by biaxially stretching a polyamide 6 resin as a main raw material in a flat film method.

This standard specifies the general technical requirements for the acceptance, packing, marking and quality certification of steel pipe.

This standard specifies the dimension, shape, weight and tolerances for hot-rolled sheets and plates.

This Standard specifies the permissible tolerances of chemical composition of finished unalloyed steel (excluding boiling steel), low alloy steel and alloy steel products that are relative to the threshold value of melted chemical composition; and it provides the relevant terms and definitions.