Gb T 818 2016 Translated English Of Chinese Standard Gbt 818 2016 Gb T818 2016 Gbt818 2016

This Standard specifies the type and dimension, technical conditions and markings of pan head screw with cross recess. This Standard is applicable to the Type H and Type Z pan head screws with cross recess for Thread Specification M1.6~M10, Property Class 4.8, A2-50, A2-70, CU2, CU3 and AL4, Product Grade A.

This Standard specifies the category, code, order content, dimension, shape, mass, technical requirements, test methods, inspection rules, packaging, marking and quality certificates of seamless steel tubes for low-temperature-service piping.

This Standard specifies the type size, technical conditions and marks of prevailing torque type hexagon nuts (with non-metallic insert), style 2. This Standard is applicable to prevailing torque type hexagon nuts (with non-metallic insert), style 2 of which the thread specifications are M5 ~ M36, performance grades are 10 and 12, the product grades are grade A and grade B. Grade A is used for nuts of 16 mm; Grade B is used for nuts of D>16 mm.

This Part of GB/T 6187 specifies the dimensions, technical requirements and designation of prevailing torque type all-metal hexagon nuts with flange, style 2.

This Standard specifies test methods for verifying the capabilities of tyres for truck and bus, including terms and definitions, test equipment and precision, test conditions, test procedure, judgment criterion and test report, etc. In the test methods given, only some may be required depending on the type of tyre to be tested.

This Part of GB/T 6183 specifies the type and dimension, technical conditions and markings of prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2.

This Standard specifies the limit value and detection of the burr height for stampings. This Standard applies to metal stampings that have certain requirements for burr height.

This Part of GB/T 819 specifies the type and dimension, technical conditions and markings of Property Class 4.8 of countersunk flat head screws with cross recess. This Part is applicable to the Type-H and Type-Z countersunk flat head screws with cross recess for Thread Specification M1.6~M10, Property Class 4.8, Product Grade A.