Gb T 8826 2019 Translated English Of Chinese Standard Gbt 8826 2019 Gb T8826 2019 Gbt8826 2019

This Standard specifies the classification, technical requirements, test methods, inspection rules, as well as marking, packaging, transportation and storage of rubber antioxidant - polymerized 2,2,4-trimethyl-1,2-dihydroquinoline (hereinafter referred to as rubber antioxidant TMQ).

This Standard specifies procedures for using rectangular coordinates and polar coordinates to establish the front, back, and three-dimensional wafer coordinate systems. This Standard applies to the establishment of wafer coordinate systems with and without pattern. The coordinate system is used to determine and record the exact locations of test results such as defects and particles on the wafer.

This Standard specifies the ordering requirements, manufacturing process, technical requirements, inspection rules and test methods, acceptance and quality certification, identification and packaging of large exposed gear steel castings. This Standard applies to the ordering, manufacture, and inspection of large gear steel castings in the form of exposed drive, which are cast using the sand mold.

This Standard specifies the unique indication or display content of the instrumentation for electric vehicle. This Standard is applicable to the electric vehicle.

This Standard specifies a method for evaluating the grooving corrosion of highfrequency electric resistance welded steel pipes by using the constant potential anodic polarization method in a 3.5% NaCl solution. This Standard is applicable to the test of grooving corrosion for carbon steel high frequency electric resistance welded pipes.

This Standard stipulates contact corrosion test method of packaging materials against the contacted metallic surface. It includes test environment conditions, reagents, test materials, instruments and equipment, samples, test procedures and test report. This Standard is applicable to contact corrosion test of packaging materials against steel and aluminum. The contact corrosion test against the surface of other metallic materials may take this as a reference.

This Standard specifies product classification, technical requirements, test methods, inspection rules, marking, package, transportation, storage, quality certificate, and ordering form (or contract) contents of platinum ingots. This Standard is applicable to the platinum ingots produced by the platinum-contained raw materials.

This Standard specifies the requirements and inspection methods for parts and assemblies of the mechanical watch movements. This Standard applies to parts and assemblies of the mechanical watch movements that have undergone finishing processing.