General Purpose Machinery World Summary

The General Purpose Machinery World Summary Paperback Edition provides 7 years of Historic & Current data on the market in about 100 countries. The Aggregated market comprises of the 97 Products / Services listed. The Products / Services covered (General purpose machinery) are classified by the 5-Digit NAICS Product Codes and each Product and Services is then further defined by each 6 to 10-Digit NAICS Product Codes. In addition full Financial Data (188 items: Historic & Current Balance Sheet, Financial Margins and Ratios) Data is provided for about 100 countries. Total Market Values are given for 97 Products/Services covered, including: GENERAL PURPOSE MACHINERY 1. All other miscellaneous general-purpose machinery 2. Filters & strainers, except fluid power 3. Industrial filters & strainers, except fluid power (assemblies (containment or housing devices) & reusable (cleanable) media) 4. Filter & strainer assemblies (containment or housing devices; except for fluid power systems), with or without filter element installed, for water; except parts & accessories 5. Filter & strainer assemblies (containment or housing devices; except for fluid power systems), with or without filter element installed, for fluids other than water; except parts & accessories 6. Reusable (cleanable) media for filters & strainers, except for fluid power 7. Nonreusable media for filters & strainers, incl disposable (throw away) litter cartridges, except for fluid power 8. Nonreusable media for filters & strainers, incl disposable (throwaway) litter cartridges, except for fluid power 9. Parts & accessories for filters & strainers (except for fluid power systems), sold separately 10. Filters & strainers, except fluid power, nsk 11. Filters for hydraulic fluid power systems, nonaerospace 12. Filters for pneumatic fluid power systems, nonaerospace 13. Filters for hydraulic & pneumatic fluid power systems, aerospace 14. All other miscellaneous general industrial machinery 15. Industrial robots, attachments and parts 16. Gas separating equipment 17. Centrifugals and separators (except cream, grain and berry) 18. All other separatory products, for general industry use 19. Steam and vapor separators 20. Sifting and screening machines 21. All other misc. separatory prods., gen. ind. use (comp. units) 22. Parts for products for separating solids/liquids/gases 23. Gas generating equipment 24. Mixers for general industrial processes, solids or liquids 25. Automatic fire sprinklers 26. Compressed air/gas dryers & centralized auto. lub. systems 27. Compressed air/gas dryers (refrigerant, desiccant, etc.) 28. Lub. systems, ind., centralized/auto., pneumatic systems 29. All other machinery, for general industry use 30. Lub. systems, ind., centralized/auto., not pneumatic systems 31. Metal baling presses 32. Hydraulic jacks 33. Screwjacks (except automotive) 34. All other misc. mach. for general ind. use (complete units) 35. Metal bellows 36. Parts, all other misc. general industrial machinery and equip. 37. All other miscellaneous general industrial machinery, nsk 38. General industrial machinery, nec 39. Industrial robots, attachments & parts 40. Gas separating equipment 41. Centrifugals & separators (except cream, grain & berry) 42. Other separatory products, nec, for general industrial use 43. Steam & vapor separators 44. Sifting & screening machines 45. Other machinery for general industrial use, nec, for separating solids, liquids, or gases, complete units 46. Parts for products for separating solids, liquids, or gases, except parts for filters & strainers & fluid power products /.. etc.

The General Purpose Machinery World Summary Paperback Edition provides 7 years of Historic & Current data on the market in about 100 countries. The Aggregated market comprises of the 97 Products / Services listed. The Products / Services covered (General purpose machinery) are classified by the 5-Digit NAICS Product Codes and each Product and Services is then further defined by each 6 to 10-Digit NAICS Product Codes. In addition full Financial Data (188 items: Historic & Current Balance Sheet, Financial Margins and Ratios) Data is provided for about 100 countries. Total Market Values are given for 97 Products/Services covered, including: GENERAL PURPOSE MACHINERY 1. All other miscellaneous general-purpose machinery 2. Filters & strainers, except fluid power 3. Industrial filters & strainers, except fluid power (assemblies (containment or housing devices) & reusable (cleanable) media) 4. Filter & strainer assemblies (containment or housing devices; except for fluid power systems), with or without filter element installed, for water; except parts & accessories 5. Filter & strainer assemblies (containment or housing devices; except for fluid power systems), with or without filter element installed, for fluids other than water; except parts & accessories 6. Reusable (cleanable) media for filters & strainers, except for fluid power 7. Nonreusable media for filters & strainers, incl disposable (throw away) litter cartridges, except for fluid power 8. Nonreusable media for filters & strainers, incl disposable (throwaway) litter cartridges, except for fluid power 9. Parts & accessories for filters & strainers (except for fluid power systems), sold separately 10. Filters & strainers, except fluid power, nsk 11. Filters for hydraulic fluid power systems, nonaerospace 12. Filters for pneumatic fluid power systems, nonaerospace 13. Filters for hydraulic & pneumatic fluid power systems, aerospace 14. All other miscellaneous general industrial machinery 15. Industrial robots, attachments and parts 16. Gas separating equipment 17. Centrifugals and separators (except cream, grain and berry) 18. All other separatory products, for general industry use 19. Steam and vapor separators 20. Sifting and screening machines 21. All other misc. separatory prods., gen. ind. use (comp. units) 22. Parts for products for separating solids/liquids/gases 23. Gas generating equipment 24. Mixers for general industrial processes, solids or liquids 25. Automatic fire sprinklers 26. Compressed air/gas dryers & centralized auto. lub. systems 27. Compressed air/gas dryers (refrigerant, desiccant, etc.) 28. Lub. systems, ind., centralized/auto., pneumatic systems 29. All other machinery, for general industry use 30. Lub. systems, ind., centralized/auto., not pneumatic systems 31. Metal baling presses 32. Hydraulic jacks 33. Screwjacks (except automotive) 34. All other misc. mach. for general ind. use (complete units) 35. Metal bellows 36. Parts, all other misc. general industrial machinery and equip. 37. All other miscellaneous general industrial machinery, nsk 38. General industrial machinery, nec 39. Industrial robots, attachments & parts 40. Gas separating equipment 41. Centrifugals & separators (except cream, grain & berry) 42. Other separatory products, nec, for general industrial use 43. Steam & vapor separators 44. Sifting & screening machines 45. Other machinery for general industrial use, nec, for separating solids, liquids, or gases, complete units 46. Parts for products for separating solids, liquids, or gases, except parts for filters & strainers & fluid power products /.. etc.

First published in 1990. There was a time when most researchers believed that the only phenomena that counted in the social sciences were those that could be measured. To make that perfectly clear, they called any phenomenon they intended to study a 'variable', indicating that the phenomenon could vary in size, length, amount, or any other quantity. Unfortunately, not many phenomena in the human world comes naturally in quantities. If we cannot even give a useful answer to what qualitative analysis is and how it works, then it seems rather incongruent to try and involve a computer, the very essence of precision and orderliness. Isn't qualitative analysis a much too individualistic and flexible an activity to be supported by a computer? Won't a computer do exactly what qualitative researchers want to avoid, namely standardize the process? Won't it mechanize and rigidify qualitative analysis? The answer to these questions is NO, and this book explains why.

Containing 4 plenary papers and 38 technical papers, this volume contributes to the literature on the important subject of man-machine systems. The many topics discussed include human performance skills, knowledge engineering and expert systems, training procedures, human performance and mental load models, and human-machine interfaces.

Image Processing, Analysis and Machine Vision represent an exciting part of modern cognitive and computer science. Following an explosion of inter est during the Seventies, the Eighties were characterized by the maturing of the field and the significant growth of active applications; Remote Sensing, Technical Diagnostics, Autonomous Vehicle Guidance and Medical Imaging are the most rapidly developing areas. This progress can be seen in an in creasing number of software and hardware products on the market as well as in a number of digital image processing and machine vision courses offered at universities world-wide. There are many texts available in the areas we cover - most (indeed, all of which we know) are referenced somewhere in this book. The subject suffers, however, from a shortage of texts at the 'elementary' level - that appropriate for undergraduates beginning or completing their studies of the topic, or for Master's students - and the very rapid developments that have taken and are still taking place, which quickly age some of the very good text books produced over the last decade or so. This book reflects the authors' experience in teaching one and two semester undergraduate and graduate courses in Digital Image Processing, Digital Image Analysis, Machine Vision, Pattern Recognition and Intelligent Robotics at their respective institutions.

The Miscellaneous General Purpose Machinery World Summary Paperback Edition provides 7 years of Historic & Current data on the market in about 100 countries. The Aggregated market comprises of the 380 Products / Services listed. The Products / Services covered (Miscellaneous general purpose machinery manufactures) are classified by the 5-Digit NAICS Product Codes and each Product and Services is then further defined by each 6 to 10-Digit NAICS Product Codes. In addition full Financial Data (188 items: Historic & Current Balance Sheet, Financial Margins and Ratios) Data is provided for about 100 countries. Total Market Values are given for 380 Products/Services covered, including: MISCELLANEOUS GENERAL PURPOSE MACHINERY 1. Miscellaneous other general purpose machinery 2. Power-driven handtool manufactures 3. Power-driven handtools, pneumatic, hydraulic & power-actuated 4. Pneumatic percussion handtools (such as runners, riveters, chippers, scalers) 5. Pneumatic drills, screwdrivers & nut-runners 6. Pneumatic hand impact wrenches 7. Pneumatic rotary hand grinders, polishers & sanders 8. Other pneumatic hand grinders, polishers & sanders 9. Pneumatic hand staplers 10. Pneumatic hand nailers 11. Other pneumatic-powered handtools 12. Parts, attachments & accessories for pneumatic-powered handtools (sold separately) 13. Power-actuated handtools & parts 14. Hydraulic power-driven handtools 15. Parts, attachments & accessories for hydraulic handtools 16. Power-driven handtools, pneumatic, hydraulic & powder-actuated, nsk 17. Power-driven handtools, pneumatic, hydraulic & power-actuated, nsk 18. Power-driven handtools, engine (internal combustion) driven 19. Internal combustion engine driven chain saws 20. Other internal combustion engine-driven handtools, incl cut-off saws & drills 21. Parts, attachments & accessories for internal combustion engine-driven chain saws 22. Parts, attachments & accessories for internal combustion engine-driven tools, nec 23. Power-driven handtools, engine (internal combustion) driven, nsk 24. Power-driven handtools, battery-powered (cordless) 25. Battery-powered (cordless) screwdrivers (without 3-jaw chuck) 26. Battery-powered (cordless) driver-drills 27. Battery-powered (cordless) drills 28. Battery-powered, cordless handsaws 29. Other battery-powered (cordless) handtools 30. Parts, attachments & accessories for battery-powered (cordless) handtools (sold separately) 31. Power-driven handtools, battery-powered (cordless), nsk 32. Power-driven handtools, electric (excl battery-powered) 33. Drills (excl battery powered) 34. Electric hand jig & saber saws, armature mounted on ball bearings (except battery-powered) 35. Electric hand circular saws, armature mounted primarily on sleeve bearings (except battery-powered) 36. Electric hand jig & saber saws, armature mounted on other than ball bearings (except battery powered) 37. Electric hand reciprocating saws (except battery-powered) 38. Electric hand circular saws, armature mounted primarily on other than sleeve bearings, 7 in. (177.80 mm) blade or less (except battery-powered) 39. Electric hand circular saws, armature mounted primarily on other than sleeve bearings, more than 7 in. (177.80 mm) to less than 8 in. (203.20 mm) blade (except battery-powered) 40. Electric hand circular saws, armature mounted primarily on other than sleeve bearings, 8 in. (203.20 mm) blade or more (except battery-powered) 41. Electric hammers, percussion & rotary, without drill chuck (except battery-powered) 42. Electric screwdrivers & nut-runners (except battery-powered) 43. Electric hammers-drills, with a drill chuck (except battery-powered) /.. etc.