Handbook Of Electronics Packaging Design And Engineering

The Handbook of Electronics Packaging Design and Engineering has been writ ten as a reference source for use in the packaging design of electronics equip ment. It is designed to provide a single convenient source for the solution of re curring design problems. The primary consideration of any design is that the end product meet or exceed the applicable product specifications. The judicious use of uniform design practices will realize the following economies and equipment improvements: • Economics of design. Uniform design practices will result in less engineering and design times and lower costs. They will also reduce the number of changes that may be required due to poor reliability, maintainability, or producibility. • Improved design. Better designs with increased reliability, maintainability, and producibility will result from the use of uniform design practices. • Production economies. Uniform designs employing standard available tools, materials, and parts will result in the cost control of manufacturing. The Handbook is intended primarily for the serious student of electronics packaging and for those engineers and designers actively engaged in this vital and interesting profession. It attempts to present electronics packaging as it is today. It can be used as a training text for instructional purposes and as a reference source for the practicing designer and engineer.

The packaging of electronic devices and systems represents a significant challenge for product designers and managers. Performance, efficiency, cost considerations, dealing with the newer IC packaging technologies, and EMI/RFI issues all come into play. Thermal considerations at both the device and the systems level are also necessary. The Electronic Packaging Handbook, a new volume in the Electrical Engineering Handbook Series, provides essential factual information on the design, manufacturing, and testing of electronic devices and systems. Co-published with the IEEE, this is an ideal resource for engineers and technicians involved in any aspect of design, production, testing or packaging of electronic products, regardless of whether they are commercial or industrial in nature. Topics addressed include design automation, new IC packaging technologies, materials, testing, and safety. Electronics packaging continues to include expanding and evolving topics and technologies, as the demand for smaller, faster, and lighter products continues without signs of abatement. These demands mean that individuals in each of the specialty areas involved in electronics packaging-such as electronic, mechanical, and thermal designers, and manufacturing and test engineers-are all interdependent on each others knowledge. The Electronic Packaging Handbook elucidates these specialty areas and helps individuals broaden their knowledge base in this ever-growing field.

Both a handbook for practitioners and a text for use in teaching electronic packaging concepts, guidelines, and techniques. The treatment begins with an overview of the electronics design process and proceeds to examine the levels of electronic packaging and the fundamental issues in the development

Volume 1: Packaging is an authoritative reference source of practical information for the design or process engineer who must make informed day-to-day decisions about the materials and processes of microelectronic packaging. Its 117 articles offer the collective knowledge, wisdom, and judgement of 407 microelectronics packaging experts-authors, co-authors, and reviewers-representing 192 companies, universities, laboratories, and other organizations. This is the inaugural volume of ASMAs all-new ElectronicMaterials Handbook series, designed to be the Metals Handbook of electronics technology. In over 65 years of publishing the Metals Handbook, ASM has developed a unique editorial method of compiling large technical reference books. ASMAs access to leading materials technology experts enables to organize these books on an industry consensus basis. Behind every article. Is an author who is a top expert in its specific subject area. This multi-author approach ensures the best, most timely information throughout. Individually selected panels of 5 and 6 peers review each article for technical accuracy, generic point of view, and completeness.Volumes in the Electronic Materials Handbook series are multidisciplinary, to reflect industry practice applied in integrating multiple technology disciplines necessary to any program in advanced electronics. Volume 1: Packaging focusing on the middle level of the electronics technology size spectrum, offers the greatest practical value to the largest and broadest group of users. Future volumes in the series will address topics on larger (integrated electronic assemblies) and smaller (semiconductor materials and devices) size levels.

This single source reference offers a pragmatic and accessible approach to the basic methods and procedures used in the manufacturing and design of modern electronic products. Providing a stategic yet simplified layout, this handbook is set up with an eye toward maximizing productivity in each phase of the eletronics manufacturing process. Not only does this handbook inform the reader on vital issues concerning electronics manufacturing and design, it also provides practical insight and will be of essential use to manufacturing and process engineers in electronics and aerospace manufacturing. In addition, electronics packaging engineers and electronics manufacturing managers and supervisors will gain a wealth of knowledge.

Here is the ultimate electronic packaging resource, in which luminaries from the four intertwined disciplines of packaging present a one-stop guide to the state of the art. An absolute necessity for anyone working in the field, this "how-to" reference covers all the newest technologies, including BGA, Flip Chip, and CSP.

As the demand for packaging more electronic capabilities into smaller packages rises, product developers must be more cognizant of how the system configuration will impact its performance. Practical Guide to the Packaging of Electronics: Second Edition, Thermal and Mechanical Design and Analysis provides a basic understanding of the issues that concern the field of electronics packaging. First published in 2003, this book has been extensively updated, includes more detail where needed, and provides additional segments for clarification. This volume supplies a solid foundation for heat transfer, vibration, and life expectancy calculations. Topics discussed include various modes of heat removal, such as conduction, radiation, and convection; the impact of thermal stresses; vibration and the resultant stresses; shock management; mechanical, electrical, and chemically induced reliability; and more. Unlike many other available works, it neither assumes the reader’s familiarity with the subject nor is it so basic that the reader may lose interest. Dr. Ali Jamnia has published a large number of engineering papers and presentations and is the holder of a number of patents and patent applications. He has been involved in the issues of electronics packaging since the early ‘90s and since 1995 has worked toward the development of innovative electronics systems to aid individuals with physical or cognitive disabilities. By consulting this manual, engineers, program managers, and quality assurance managers involved in electronic systems gain a fundamental grasp of the issues involved in electronics packaging, learn how to define guidelines for a system’s design, develop the ability to identify reliability issues and concerns, and are able to conduct more complete analyses for the final design.

Whether you are designing a new system or troubleshooting a current one, this ingenious text offers a wealth of valuable information. The author focuses on reliability problems and the design of systems with incomplete criteria and components and provides a simple approach for estimating thermal and mechanical characteristics of electronic systems. Practical Guide to the Packaging of Electronics discusses Packaging/enclosure design and reliability Thermal, junction-to-case, and contact interface resistance Direct and indirect flow system design Fin design and fan selection Vital elements of shock and vibration Thermal stresses and strains in the design and analysis of mechanically reliable systems Reliability models and system failure The selection of engineering software to facilitate system analysis Design parameters in an avionics electronics package Practical Guide to the Packaging of Electronics is an excellent refresher for mechanical, biomedical, electrical and electronics, manufacturing, materials, and quality and reliability engineers, and will be an invaluable text for upper-level undergraduate and graduate students in these disciplines.