Handbook Of Water And Energy Management In Food Processing

Effective water and energy use in food processing is essential, not least for legislative compliance and cost reduction. This major volume reviews techniques for improvements in the efficiency of water and energy use as well as wastewater treatment in the food industry. Opening chapters provide an overview of key drivers for better management. Part two is concerned with assessing water and energy consumption and designing strategies for their reduction. These include auditing energy and water use, and modelling and optimisation tools for water minimisation. Part three reviews good housekeeping procedures, measurement and process control, and monitoring and intelligent support systems. Part four discusses methods to minimise energy consumption. Chapters focus on improvements in specific processes such as refrigeration, drying and heat recovery. Part five discusses water reuse and wastewater treatment in the food industry. Chapters cover water recycling, disinfection techniques, aerobic and anaerobic systems for treatment of wastewater. The final section concentrates on particular industry sectors including fresh meat and poultry, cereals, sugar, soft drinks, brewing and winemaking. With its distinguished editors and international team of contributors, Handbook of water and energy management in food processing is a standard reference for the food industry. Provides an overview of key drivers for better management Reviews techniques for improvements in efficiency of water and energy use and waste water treatment Examines house keeping proceedures and measurement and process control

Food manufacturing has evolved over the centuries from kitchen industries to modern, sophisticated production operations. A typical food factory includes the food processing and packaging lines, the buildings and exterior landscaping, and the utility-supply and waste-treatment facilities. As a single individual is unlikely to possess all the necessary skills required to facilitate the design, the task will undoubtedly be undertaken by an interdisciplinary team employing a holistic approach based on a knowledge of the natural and biological sciences, most engineering disciplines, and relevant legislation. In addition, every successful project requires a competent project manager to ensure that all tasks are completed on time and within budget. This Handbook attempts to compress comprehensive, up-to-date coverage of these areas into a single volume. It is hoped that it will prove to be of value across the food-manufacturing community. The multi-disciplinary nature of the subject matter should facilitate more informed communication between individual specialists on the team. It should also provide useful background information on food factory design for a wider range of professionals with a more peripheral interest in the subject: for example, process plant suppliers, contractors, HSE specialists, retailers, consultants, and financial institutions. Finally, it is hoped that it will also prove to be a valuable reference for students and instructors in the areas of food technology, chemical engineering, and mechanical engineering, in particular.

Life cycle assessment (LCA) of production and processing in the food industry is an important tool for improving sustainability. Environmental assessment and management in the food industry reviews the advantages, challenges and different applications of LCA and related methods for environmental assessment, as well as key aspects of environmental management in this industry sector. Part one discusses the environmental impact of food production and processing, addressing issues such as nutrient management and water efficiency in agriculture. Chapters in Part two cover LCA methodology and challenges, with chapters focusing on different food industry sectors such as crop production, livestock and aquaculture. Part three addresses the applications of LCA and related approaches in the food industry, with chapters covering combining LCA with economic tools, ecodesign of food products and footprinting methods of assessment, among other topics. The final part of the book concentrates on environmental management in the food industry, including contributions on training, eco-labelling and establishing management systems. With its international team of editors and contributors, Environmental assessment and management in the food industry is an essential reference for anyone involved in environmental management in the food industry, and for those with an academic interest in sustainable food production. Reviews the advantages, challenges and different applications of LCA and related methods for environmental assessment Discusses the environmental impact of food production and processing, addressing issues such as nutrient management and water efficiency in agriculture Examines environmental management in the food industry, including contributions on training, eco-labelling and establishing management systems

Examining the full cycle from farm to fork, this book reviews the current status of green processing in the agriculture and agri-food sector, and provides strategies for enhancing the use of environmentally-friendly technologies for production and processing.

The Interaction of Food Industry and Environment addresses all levels of interaction, paying particular attention to avenues for responsible operational excellence in food production and processing. Written at a scientific level, this book explores many topics relating to the food industry and environment, including environmental management systems, environmental performance evaluation, the correlation between food industry, sustainable diets and environment, environmental regulation on the profitability of sustainable water use in the food industry, lifecycle assessment, green supply chain network design and sustainability, the valorization of food processing waste via biorefineries, food-energy-environment trilemma, wastewater treatment, and much more. Readers will also find valuable information on energy production from food processing waste, packaging and food sustainability, the concept of virtual water in the food industry, water reconditioning and reuse in the food industry, and control of odors in the food industry. This book is a welcomed resource for food scientists and technologists, environmentalists, food and environmental engineers and academics. Addresses the interaction between the food industry and environment at all levels Focuses on the past decade’s advances in the field Provides a guide to optimize the current food industry’s performance Serves as a resource for anyone dealing with food and environmental science and technology Includes coverage of a variety of topics, including performance indicators, the correlation between the food industry, sustainable diets and the environment, environmental regulations, lifecycle assessments, green supply chain networks, and more

Food Processing: Principles and Applications second edition is the fully revised new edition of this best-selling food technology title.Advances in food processing continue to take place as food scientists and food engineers adapt to the challenges imposed by emerging pathogens, environmental concerns, shelf life, quality and safety, as well as the dietary needs and demands of humans. In addition to covering food processing principles that have long been essential to food quality and safety, this edition of Food Processing: Principles and Applications, unlike the former edition, covers microbial/enzyme inactivation kinetics, alternative food processing technologies as well as environmental and sustainability issues currently facing the food processing industry. The book is divided into two sections, the first focusing on principles of food processing and handling, and the second on processing technologies and applications. As a hands-on guide to the essential processing principles and their applications, covering the theoretical and applied aspects of food processing in one accessible volume, this book is a valuable tool for food industry professionals across all manufacturing sectors, and serves as a relevant primary or supplemental text for students of food science.

Since its first development in the 1970s, Process Integration (PI) has become an important methodology in achieving more energy efficient processes. This pioneering handbook brings together the leading scientists and researchers currently contributing to PI development, pooling their expertise and specialist knowledge to provide readers with a comprehensive and up-to-date guide to the latest PI research and applications. After an introduction to the principles of PI, the book reviews a wide range of process design and integration topics ranging from heat and utility systems to water, recycling, waste and hydrogen systems. The book considers Heat Integration, Mass Integration and Extended PI as well as a series of applications and case studies. Chapters address not just operating and capital costs but also equipment design and operability issues, through to buildings and supply chains. With its distinguished editor and international team of expert contributors, Handbook of Process Integration (PI) is a standard reference work for managers and researchers in all energy-intensive industries, as well as academics with an interest in them, including those designing and managing oil refineries, petrochemical and power plants, as well as paper/pulp, steel, waste, food and drink processors. This pioneering handbook provides a comprehensive and up-to-date guide to the latest process integration research and applications Reviews a wide range of process design and integration topics ranging from heat and utility systems to water, recycling, waste and hydrogen systems Chapters also address equipment design and operability issues, through to buildings and supply chains

This comprehensive collection reviews research in the field, covering optimisation of manufacturing procedures to decrease waste, reduction of energy and water expenditure, methods to valorise refuse by co-product recovery and techniques to deal with wastewater and solid waste. The intensification of agriculture and food production in recent years has led to an increase in the production of food co-products and wastes. Their disposal by incineration or landfill is often expensive as well as environmentally sensitive. Methods to valorise unused co-products and improve the management of wastes that cannot be reused, as well as techniques to reduce the quantity of waste produced in the first place, are increasingly important to the food industry. With its distinguished editor and array of international contributors, Waste management and co-product recovery in food processing reviews the latest developments in this area and describes how they can be used to reduce waste. The first section of the book provides a concise introduction to the field with a particular focus on legislation and consumer interests, principle drivers of waste management. Part 2 addresses the minimisation of biowaste and the optimisation of water and energy use in food processing. The third section covers key technologies for co-product separation and recovery, such as supercritical fluid extraction and membrane filtration, as well as important issues to consider when recovering co-products, such as waste stabilisation and microbiological risk assessment. Part 4 offers specific examples of waste management and co-product exploitation in particular sectors such as the red meat, poultry, dairy, fish and fruit and vegetable industries. The final part of the book summarises advanced techniques, to dispose of waste products that cannot be reused, and reviews state of the art technologies for wastewater treatment. Waste management and co-product recovery in food processing is a vital reference to all those in the food processing industry concerned with waste minimisation, co-product valorisation and end waste management.