Hazard Analysis Techniques For System Safety

Explains in detail how to perform the most commonly used hazard analysis techniques with numerous examples of practical applications Includes new chapters on Concepts of Hazard Recognition, Environmental Hazard Analysis, Process Hazard Analysis, Test Hazard Analysis, and Job Hazard Analysis Updated text covers introduction, theory, and detailed description of many different hazard analysis techniques and explains in detail how to perform them as well as when and why to use each technique Describes the components of a hazard and how to recognize them during an analysis Contains detailed examples that apply the methodology to everyday problems

A practical guide to identifying hazards using common hazard analysis techniques Many different hazard analysis techniques have been developed over the past forty years. However, there is only a handful of techniques that safety analysts actually apply in their daily work. Written by a former president of the System Safety Society and winner of the Boeing Achievement and Apollo Awards for his safety analysis work, Hazard Analysis Techniques for System Safety explains, in detail, how to perform the most commonly used hazard analysis techniques employed by the system safety engineering discipline. Focusing on the twenty-two most commonly used hazard analysis methodologies in the system safety discipline, author Clifton Ericson outlines the three components that comprise a hazard and describes how to use these components to recognize a hazard during analysis. He then examines each technique in sufficient detail and with numerous illustrations and examples, to enable the reader to easily understand and perform the analysis. Techniques covered include: * Preliminary Hazard List (PHL) Analysis * Preliminary Hazard Analysis (PHA) * Subsystem Hazard Analysis (SSHA) * System Hazard Analysis (SHA) * Operating and Support Hazard Analysis (O&SHA) * Health Hazard Assessment (HHA) * Safety Requirements/Criteria Analysis (SRCA) * Fault Tree Analysis (FTA) * Event Tree Analysis (ETA) * Failure Mode and Effects Analysis (FMEA) * Fault Hazard Analysis * Functional Hazard Analysis * Sneak Circuit Analysis (SCA) * Petri Net Analysis (PNA) * Markov Analysis (MA) * Barrier Analysis (BA) * Bent Pin Analysis (BPA) * HAZOP Analysis * Cause Consequence Analysis (CCA) * Common Cause Failure Analysis (CCFA) * MORT Analysis * Software Safety Assessment (SWSA) Written to be accessible to readers with a minimal amount of technical background, Hazard Analysis Techniques for System Safety gathers, for the first time in one source, the techniques that safety analysts actually apply in daily practice. Both new and seasoned analysts will find this book an invaluable resource for designing and constructing safe systems-- in short, for saving lives.

We all know that safety should be an integral part of the systems that we build and operate. The public demands that they are protected from accidents, yet industry and government do not always know how to reach this common goal. This book gives engineers and managers working in companies and governments around the world a pragmatic and reasonable approach to system safety and risk assessment techniques. It explains in easy-to-understand language how to design workable safety management systems and implement tested solutions immediately. The book is intended for working engineers who know that they need to build safe systems, but aren’t sure where to start. To make it easy to get started quickly, it includes numerous real-life engineering examples. The book’s many practical tips and best practices explain not only how to prevent accidents, but also how to build safety into systems at a sensible price. The book also includes numerous case studies from real disasters that describe what went wrong and the lessons learned. See What’s New in the Second Edition: New chapter on developing government safety oversight programs and regulations, including designing and setting up a new safety regulatory body, developing safety regulatory oversight functions and governance, developing safety regulations, and how to avoid common mistakes in government oversight Significantly expanded chapter on safety management systems, with many practical applications from around the world and information about designing and building robust safety management systems, auditing them, gaining internal support, and creating a safety culture New and expanded case studies and "Notes from Nick’s Files" (examples of practical applications from the author’s extensive experience) Increased international focus on world-leading practices from multiple industries with practical examples, common mistakes to avoid, and new thinking about how to build sustainable safety management systems New material on safety culture, developing leading safety performance indicators, safety maturity model, auditing safety management systems, and setting up a safety knowledge management system

A one-stop reference guide to design for safety principles and applications Design for Safety (DfSa) provides design engineers and engineering managers with a range of tools and techniques for incorporating safety into the design process for complex systems. It explains how to design for maximum safe conditions and minimum risk of accidents. The book covers safety design practices, which will result in improved safety, fewer accidents, and substantial savings in life cycle costs for producers and users. Readers who apply DfSa principles can expect to have a dramatic improvement in the ability to compete in global markets. They will also find a wealth of design practices not covered in typical engineering books—allowing them to think outside the box when developing safety requirements. Design Safety is already a high demand field due to its importance to system design and will be even more vital for engineers in multiple design disciplines as more systems become increasingly complex and liabilities increase. Therefore, risk mitigation methods to design systems with safety features are becoming more important. Designing systems for safety has been a high priority for many safety-critical systems—especially in the aerospace and military industries. However, with the expansion of technological innovations into other market places, industries that had not previously considered safety design requirements are now using the technology in applications. Design for Safety: Covers trending topics and the latest technologies Provides ten paradigms for managing and designing systems for safety and uses them as guiding themes throughout the book Logically defines the parameters and concepts, sets the safety program and requirements, covers basic methodologies, investigates lessons from history, and addresses specialty topics within the topic of Design for Safety (DfSa) Supplements other books in the series on Quality and Reliability Engineering Design for Safety is an ideal book for new and experienced engineers and managers who are involved with design, testing, and maintenance of safety critical applications. It is also helpful for advanced undergraduate and postgraduate students in engineering. Design for Safety is the second in a series of “Design for” books. Design for Reliability was the first in the series with more planned for the future.

Plant Hazard Analysis and Safety Instrumentation Systems is the first book to combine coverage of these two integral aspects of running a chemical processing plant. It helps engineers from various disciplines learn how various analysis techniques, international standards, and instrumentation and controls provide layers of protection for basic process control systems, and how, as a result, overall system reliability, availability, dependability, and maintainability can be increased. This step-by-step guide takes readers through the development of safety instrumented systems, also including discussions on cost impact, basics of statistics, and reliability. Swapan Basu brings more than 35 years of industrial experience to this book, using practical examples to demonstrate concepts. Basu links between the SIS requirements and process hazard analysis in order to complete SIS lifecycle implementation and covers safety analysis and realization in control systems, with up-to-date descriptions of modern concepts, such as SIL, SIS, and Fault Tolerance to name a few. In addition, the book addresses security issues that are particularly important for the programmable systems in modern plants, and discusses, at length, hazardous atmospheres and their impact on electrical enclosures and the use of IS circuits. Helps the reader identify which hazard analysis method is the most appropriate (covers ALARP, HAZOP, FMEA, LOPA) Provides tactics on how to implement standards, such as IEC 61508/61511 and ANSI/ISA 84 Presents information on how to conduct safety analysis and realization in control systems and safety instrumentation

A new approach to safety, based on systems thinking, that is more effective, less costly, and easier to use than current techniques. Engineering has experienced a technological revolution, but the basic engineering techniques applied in safety and reliability engineering, created in a simpler, analog world, have changed very little over the years. In this groundbreaking book, Nancy Leveson proposes a new approach to safety—more suited to today's complex, sociotechnical, software-intensive world—based on modern systems thinking and systems theory. Revisiting and updating ideas pioneered by 1950s aerospace engineers in their System Safety concept, and testing her new model extensively on real-world examples, Leveson has created a new approach to safety that is more effective, less expensive, and easier to use than current techniques. Arguing that traditional models of causality are inadequate, Leveson presents a new, extended model of causation (Systems-Theoretic Accident Model and Processes, or STAMP), then shows how the new model can be used to create techniques for system safety engineering, including accident analysis, hazard analysis, system design, safety in operations, and management of safety-critical systems. She applies the new techniques to real-world events including the friendly-fire loss of a U.S. Blackhawk helicopter in the first Gulf War; the Vioxx recall; the U.S. Navy SUBSAFE program; and the bacterial contamination of a public water supply in a Canadian town. Leveson's approach is relevant even beyond safety engineering, offering techniques for “reengineering” any large sociotechnical system to improve safety and manage risk.

System safety is an engineering discipline that is applied during the design and development of a product or system to identify and eliminate/mitigate hazards, thereby preventing potential mishaps and accidents. System safety is ultimately about savings lives. It is a proven technique that is currently applied on a diversity of systems, such as commercial aircraft, military aircraft, ships, trains, automobiles, nuclear power plants, weapon systems, chemical processing plants, mining, software, and medical devices. The lack of system safety costs millions of dollars in damages and loss of lives every year due to preventable mishaps. The purpose of this book is to provide an introduction to the system safety process; it presents the tools, techniques and processes involved in the system safety discipline. This book is intended for persons from various industries who are interested in making safe products and systems. It should be very useful to those individuals new to the system safety discipline with a desire to understand the basic methodology. It is also intended as a refresher for system safety practitioners that already apply the system safety process in their daily job. This book is for engineers, analysts and managers who are confronted with the responsibility of developing safe systems and products.

The first comprehensive reference work covering safety professional terminology A convenient desk reference designed to fill a serious gap in the system safety body of knowledge, the Concise Encyclopedia of System Safety: Definition of Terms and Concepts is the first book explicitly devoted to defining system safety terms and concepts and designed to help safety professionals quickly and easily locate the definitions and information which they need to stay abreast of research new and old. Definitions for safety-related terminology currently differ between individual books, guidelines, standards, and even laws. Establishing a single common and complete set of definitions for the first time, with examples for each, the book revolutionizes the way in which safety professionals are able to understand their field. The definitive resource devoted to defining all of the major terms and concepts used in system safety and reliability in a single volume, Concise Encyclopedia of System Safety is the go-to book for systems safety engineers, analysts, and managers as they encounter new terms, or need an exact, technical definition of commonly used terms.