Heat And Fluid Flow In Power System Components

Heat and Fluid Flow in Power System Components is a collection of papers presented at the Second Conference on Mechanical Power Engineering held in Cairo, Egypt in September 1978. This volume covers a wide range of topics relating to heat and fluid flow in power system components, including film cooling, droplet evaporation, and laminar flames. Practical applications such as furnaces, heat exchanges, pumps, and turbines are also discussed. Results of investigations carried out experimentally, by computation, and both computation and experimentation techniques are presented. This book is comprised of 21 chapters and begins with an analysis of heat transfer in power elements, including evaporation of surface liquid droplet in an air stream. The thermal conductivity of granular materials is also examined. The following chapters explore reactive and non-reactive flows, paying particular attention to helium two-phase instabilities; air flow around hyperbolic cooling towers; pulsating flow in axial turbines; laminar flame propagation in tubes; and characteristics of combustion heat liberated downstream of circular bluff bodies. The final chapter is devoted to an experimental and theoretical investigation of the reversed flow furnace. This monograph will be of interest to chemical and mechanical engineers as well as researchers concerned with the design, development, and optimum modes of operations of power systems and their components.

A fully comprehensive guide to thermal systems designcovering fluid dynamics, thermodynamics, heat transfer andthermodynamic power cycles Bridging the gap between the fundamental concepts of fluidmechanics, heat transfer and thermodynamics, and the practicaldesign of thermo-fluids components and systems, this textbookfocuses on the design of internal fluid flow systems, coiled heatexchangers and performance analysis of power plant systems. Thetopics are arranged so that each builds upon the previous chapterto convey to the reader that topics are not stand-alone itemsduring the design process, and that they all must come together toproduce a successful design. Because the complete design or modification of modern equipmentand systems requires knowledge of current industry practices, theauthors highlight the use of manufacturer’s catalogs toselect equipment, and practical examples are included throughout togive readers an exhaustive illustration of the fundamental aspectsof the design process. Key Features: Demonstrates how industrial equipment and systems are designed,covering the underlying theory and practical application ofthermo-fluid system design Practical rules-of-thumb are included in the text as‘Practical Notes’ to underline their importance incurrent practice and provide additional information Includes an instructor’s manual hosted on thebook’s companion website

Research and development in thermal engineering for power systems are of significant importance to many scientists who are engaged in research and design work in power-related industries and laboratories. This book focuses on variety of research areas including Components of Compressor and Turbines that are used for both electric power systems and aero engines, Fuel Cells, Energy Conversion, and Energy Reuse and Recycling Systems. To be competitive in today's market, power systems need to reduce the operating costs, increase capacity factors and deal with many other tough issues. Heat Transfer and fluid flow issues are of great significance and it is likely that a state-of-the-art edited book with reference to power systems will make a contribution for design and R&D engineers and the development towards sustainable energy systems.

Includes all works deriving from DOE, other related government-sponsored information and foreign nonnuclear information.

Fluid flow and heat transfer processes play an important role in many areas of science and engineering, from the planetary scale (e.g., influencing weather and climate) to the microscopic scales of enhancing heat transfer by the use of nanofluids; understood in the broadest possible sense, they also underpin the performance of many energy systems. This topical Special Issue of Energies is dedicated to the recent advances in this very broad field. This book will be of interest to readers not only in the fields of mechanical, aerospace, chemical, process and petroleum, energy, earth, civil ,and flow instrumentation engineering but, equally, biological and medical sciences, as well as physics and mathematics; that is, anywhere that “fluid flow and heat transfer” phenomena may play an important role or be a subject of worthy research pursuits.

Heat Transfer and Fluid in Flow Nuclear Systems discusses topics that bridge the gap between the fundamental principles and the designed practices. The book is comprised of six chapters that cover analysis of the predicting thermal-hydraulics performance of large nuclear reactors and associated heat-exchangers or steam generators of various nuclear systems. Chapter 1 tackles the general considerations on thermal design and performance requirements of nuclear reactor cores. The second chapter deals with pressurized subcooled light water systems, and the third chapter covers boiling water reactor systems. Chapter 4 tackles liquid metal cooled systems, while Chapter 5 discusses helium cooled systems. The last chapter deals with heat-exchangers and steam generators. The book will be of great help to engineers, scientists, and graduate students concerned with thermal and hydraulic problems.

Modelling and Control of Electric Power Plants focuses on the modeling and simulation of thermal and nuclear units; the methods and technologies of advanced control systems that are applied in power stations; the design and analysis of man-machine systems; and the processes in power generation. Contained in the book are the literature of contributors who have done research on design and operation of electric power plants. The book begins with the development of models of electric power plants and nuclear power plants. Simulations, analysis, and studies are conducted to test the processes and controls that are instituted in the operations of these plants. Another part of the discussion focuses on the control mechanisms that are employed in plants. These computer control systems are deemed essential in the operations of these plants. The role that computers play in plants is noted, which is particularly observed in the operation of equipment, control of conditions, and application of operational processes in these areas. Some of the areas in which modeling is carried out include electric power plants, fossil fuel power plants, boilers, and coal plants. The discussions can be a source of information to those interested in the design, control, and operation of power plants.