How To Build A Cheap Hot Rod

Learn how to build an affordable hot rod following the advice of the masters! In How to Build Affordable Hot Rods, author and lifelong hot rod aficionado Tony Thacker takes you through the process of building a hot rod on a budget. Drawing on his own extensive experience of both buying and building rods, Thacker explores the good, the bad, and the ugly. The good was setting a land speed record at Bonneville, the bad was buying a rod from which the previous owner had "swapped out" the good engine, and the ugly--well, let’s just not go there. How to Build Affordable Hot Rods includes extensive how-to sections that cover step-by-step chassis builds for Model A, 1932, and 1936 Fords, including front- and rear-end setups. The in-depth chassis builds are complimented with sections on powertrain choices, bodywork and roof chops, wheels and tires, and wiring and paint. Also included are chapters on interiors and the all-important details that individualize any project to ensure that it stands out from the rest. When Henry Ford introduced his beloved Model T, he unwittingly gave the average person the means to go racing. Prior to the T, racing was mostly a sport of the rich, but that changed with the Model T. Stripped of fenders and hopped up with speed parts, T speedsters ruled, and it wasn’t long before enthusiasm on the track translated to the street and the term hot rod entered the vernacular. Of course, it didn’t need to be a Ford (and still doesn’t), but the easiest and therefore cheapest route to Hot Rod Boulevard is down the Ford road. The journey accelerated after World War II, as hot rodding boomed with the growth of speed shops, car shows, drag racing, talented and trained GIs returning home, and the launch of Hot Rod magazine to spread the gospel far and wide. More than 100 years after the original Model T, hot rodding remains alive and well in the Australasia, Europe, and (of course) its birthplace the US.

Learn from the best and get started building your affordable hot rod today!

The ever-escalating cost of building or buying a hot rod is leaving more and more would-be hot rodders behind. This book will get those hopefuls off the sidelines by showing how a hot rod can be built for less than the cost of, say, a new Hyundai. Author Dennis Parks documents his own project--building a quintessentially cool Model T roadster from a "Track-T" kit--showing in step-by-step detail how to turn a pile of parts into a rockin hot rod. He provides a detailed, easy-to-follow guide for building a car of your own. The advice and instructions cover every aspect of an affordable hot rod build, from establishing the target vehicle and budget, to finding parts, building the car, and fine tuning the finished vehicle on the road. With Parks' money-saving tips and photo-supported how-to sequences, virtually anyone with minimal mechanical skills and the will to use them can be sure of building their hot rod right, and for the right price. The book also includes a full resource guide and recommendations for further reading.

This book is designed for anyone who has ever seen a hot rod and wondered, "How do I build one of those?" Whether you're a newcomer to the hobby or a seasoned, experienced builder, this book covers every aspect of building a hot rod from start to finish. Author Dennis Parks helps the reader select the right vehicle to build and leads them through the process of making it happen. He answers basic questions and sheds light on the entire process of building a hot rod with lots of no-nonsense advice for any degree of builder.

In How to Build Hot Rod Chassis, highly regarded hot rodding author Jeff Tann covers everything enthusiasts need to know about designing and building their new chassis and suspension system. It thoroughly explores both factory and aftermarket frames, modified factory solid-axle suspensions, and aftermarket independent front and rear suspension setups. No matter what design a reader may be considering for his own car, How to Build Hot Rod Chassis delivers a wealth of information on the pros and cons of all systems available.

A deserving tribute to the American muscle of the hot rod, this edition is filled with eye popping photography, gatefolds, and four prints to hang.