How To Rebuild And Modify Ford C4 And C6 Automatic Transmissions

In How to Rebuild and Modify Ford C4 and C6 Automatic Transmissions, author George Reid walks readers through the process step-by-step, from removing the transmission, to complete overhaul, to proper re-installation and road testing.

While millions of Ford rear-wheel-drive cars are equipped with the durable and simple C4 and C6 transmissions of the 1960s, early in the 1980s Ford replaced those old designs with the AOD transmission for a new generation of cars. Overdrive gears, once popular before WWII, were now becoming popular again, as manufacturers were under increasing pressure to raise fuel economy to meet ever more demanding EPA standards. A nice byproduct of that was more comfortable cruising speeds, where your engine didn't have to work so hard in addition to getting better fuel economy. In Ford AOD Transmissions: Rebuilding and Modifying the AOD, AODE and 4R70W, author George Reid walks you through the process step-by-step, from removing the transmission from the vehicle, to complete disassembly and cleaning, to careful reassembly, to proper re-installation and road testing. Performance modifications are also covered, as well as an ID guide for various model numbers, evolutionary design changes, shift kit installation, and torque converter selection. This book is ideal for people who already have one of these transmissions in their car, as well as enthusiasts who would like to swap one of these more modern units into an older chassis to get all the benefits of overdrive. If you plan on researching or working on any one of these overdrive models, this book is a vital addition to your workbench or library.

Over the course of performance car history, and specifically muscle car history, big-block engines are particularly beloved, and for good reason. Not only are they the essence of what a muscle car is, but before modern technology and stroker engines, they were also the best way to make a lot of horsepower. All of the Detroit manufacturers had their versions of big-block engines, and Ford was no exception. Actually, Ford was somewhat unique in that it had two very different big-block engine designs during the muscle car era. The FE engine was a design pioneered in the late 1950s, primarily as a more powerful replacement for the dated Y-block design because cars were becoming bigger and heavier, and therefore, necessitated more power to move. What started as torquey engines meant to move heavyweight sedans morphed into screaming high-performance mills that won Le Mans and drag racing championships through the 1960s. By the late 1960s, the design was dated, so Ford replaced the FE design with the "385" series, also known as the "Lima" design, which was more similar to the canted-valve Cleveland design being pioneered at the same time. It didn't share the 1960s pedigree of racing success, but the new design was better in almost every way; it exists via Ford motorsports offerings to this day. In Ford Big-Block Parts Interchange, Ford expert and historian George Reid covers both engines completely. Interchange and availability for all engine components are covered including cranks, rods, pistons, camshafts, engine blocks, intake and exhaust manifolds, carburetors, distributors, and more. Expanding from the previous edition of High-Performance Ford Parts Interchange that covered both small- and big-block engines in one volume, this book cuts out the small-block information and devotes every page to the FE Series and 385 big-blocks from Ford, which allows for more complete and extensive coverage. p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Arial}

Covers rear-wheel drive models (C3, C4, C5, C6, and AOD) and front-wheel drive models (ATX/FLC and AXOD). Included are the fundamentals, diagnosis techniques, and modifications.

In this follow up to Jerry Heasley's Rare Finds, Heasley has built a collection of his finest stories, including the 1969 Boss prototype owned by Ford stylist Larry Shinoda, the original 1967 Shelby Mustang prototype and more.

Focuses on the disassembly, inspection and step-by-step rebuild of the most popular high-performance differentials. Axles and differentials are not incredibly complex components, but there are some specific steps to follow for rebuilding, upgrading, and setting them up properly, and this book demystifies the process and explains it in detail.

GIs returning after World War II created an entirely new automotive market niche when they bought surplus Jeeps and began exploring the rugged backcountry of the American West. This burgeoning market segment, which eventually became known as sport utility vehicles (SUVs), numbered about 40,000 units per year with offerings from Jeep, Scout, Toyota, and Land Rover. In 1966, Ford entered the fray with its Bronco, offering increased refinement, more power, and an innovative coil-spring front suspension. The Bronco caught on quickly and soon established a reputation as a solid backcountry performer. In Baja, the legendary accomplishments of racers such as Parnelli Jones, Rod Hall, and Bill Stroppe further cemented the bobtail’s reputation for toughness. Ford moved upstream with the introduction of the larger Bronco for 1978, witnessing a huge increase in sales for the second-generation trucks. The Twin Traction Beam front end was introduced in the third generation, and further refinements including more aerodynamic styling, greater luxury, and more powerful fuel-injected engines came on board in the generations that followed. Through it all, the Bronco retained its reputation as a tough, versatile, and comfortable rig, both on and off the paved road. With the reintroduction of the Bronco for 2020, Ford is producing a vehicle for a whole new generation of enthusiasts that looks to bring modern styling and performance to the market while building on the 30-year heritage of the first five generations of the Bronco so dearly loved by their owners. From the development process and details of the first trucks through the 1996 models, author Todd Zuercher shares technical details, rarely seen photos, and highlights of significant models along with the stories of those people whose lives have been intertwined with the Bronco for many years. This book will have new information for everyone and will be a must-have for longtime enthusiasts and new owners alike! p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Arial; color: #000000}

Get valuable advice on how to restore your vintage Mustang! Production of the Ford Mustang, America’s most popular pony car, has been uninterrupted for more than 55 years. The popularity of the Mustang is what led to the pony-car class. The first generation of cars, from 1964-1/2 to 1973, is arguably the most beloved generation, selling more than a million cars in the first two years of production. They were sporty, affordable, and available with a wide variety of options to please a wide variety of customers. First-generation Mustangs are still very popular. They are plentiful and can be found at various price points and in various levels of condition for any potential restorer to acquire. There is an extremely robust aftermarket, so parts availability is never an issue.

Mustang expert and author Dave Stribling shares his expertise in this restorer’s guide, covering all of the essential topics. The basics of acquiring a car, determining the restoration level that is desired, and the tools necessary for the job are included. Disassembly, prep for paint and body and reassembly are covered. Also, the suspension and braking systems, the engine and driveline, and the electrical and interior components are examined. This book is an ideal starting point that features a lot of great advice about how to achieve what you want from your restoration and the best path to get there. Whether you want to tackle all of the work yourself or you just want to be informed when hiring a professional to do the work for you, this book is a valuable addition to your Mustang library.