Ibm Powerha Systemmirror For I Using Ds8000 Volume 2 Of 4

IBM® PowerHA® SystemMirror® for i is the IBM high-availability (HA), disk-based clustering solution for the IBM i operating system. When PowerHA for i is combined with IBM i clustering technology, PowerHA for i delivers a complete HA and disaster-recovery (DR) solution for business applications that run in an IBM i environment. With PowerHA for i, you can support HA capabilities with either native disk storage, IBM DS8000® storage servers, or IBM Storwize® storage servers. This IBM Redbooks® publication helps you to install, tailor, and configure IBM PowerHA SystemMirror for i with the IBM System Storage® DS8000 series. This publication provides you with planning information to prepare to use the various PowerHA offerings for the IBM DS8000 family. It also provides implementation and management information. It provides guidance about troubleshooting these solutions and identifies the documentation and data that you need to capture before you call IBM Support. This book is part of a four-book volume set that gives you a complete understanding of PowerHA for i that uses native disk storage, IBM DS8000 storage servers, or IBM Storwize storage servers. The following IBM Redbooks publications are part of this PowerHA for i volume set: IBM PowerHA SystemMirror for i: Preparation, SG24-8400 IBM PowerHA SystemMirror for i: Using IBM Storwize, SG24-8402 IBM PowerHA SystemMirror for i: Using Geographic Mirroring, SG24-8401 Important: The information that is presented in this volume set is for technical consultants, technical support staff, IT architects, and IT specialists who are responsible for providing HA and support for IBM i solutions. If you are new to HA, review the information that is presented in the first book of this volume set, IBM PowerHA SystemMirror for i: Preparation (Volume 1 of 4), SG24-8400, to get a general understanding of clustering technology, independent auxiliary storage pools (IASPs), and the PowerHA architecture.

IBM® PowerHA® SystemMirror® for i is the IBM high-availability (HA), disk-based clustering solution for the IBM i operating system. When PowerHA for i is combined with IBM i clustering technology, PowerHA for i delivers a complete HA and disaster-recovery (DR) solution for business applications that run in an IBM i environment. With PowerHA for i, you can support HA capabilities with either native disk storage, IBM DS8000® storage servers, or IBM Storwize® storage servers. This IBM Redbooks® publication helps you to install, tailor, and configure IBM PowerHA SystemMirror for i with the IBM System Storage® DS8000 series. This publication provides you with planning information to prepare to use the various PowerHA offerings for the IBM DS8000 family. It also provides implementation and management information. It provides guidance about troubleshooting these solutions and identifies the documentation and data that you need to capture before you call IBM Support. This book is part of a four-book volume set that gives you a complete understanding of PowerHA for i that uses native disk storage, IBM DS8000 storage servers, or IBM Storwize storage servers. The following IBM Redbooks publications are part of this PowerHA for i volume set: IBM PowerHA SystemMirror for i: Preparation, SG24-8400 IBM PowerHA SystemMirror for i: Using IBM Storwize, SG24-8402 IBM PowerHA SystemMirror for i: Using Geographic Mirroring, SG24-8401 Important: The information that is presented in this volume set is for technical consultants, technical support staff, IT architects, and IT specialists who are responsible for providing HA and support for IBM i solutions. If you are new to HA, review the information that is presented in the first book of this volume set, IBM PowerHA SystemMirror for i: Preparation (Volume 1 of 4), SG24-8400, to get a general understanding of clustering technology, independent auxiliary storage pools (IASPs), and the PowerHA architecture.

IBM® PowerHA® SystemMirror® for i is the IBM high-availability (HA), disk-based clustering solution for the IBM i operating system. When combined with IBM i clustering technology, PowerHA for i delivers a complete HA and disaster recovery (DR) solution for business applications running in an IBM i environment. You can use PowerHA for i to support HA capabilities with either native disk storage, IBM DS8000® storage servers, or IBM Storwize® storage servers. Use this IBM Redbooks® publication to help you install, tailor, and configure IBM PowerHA SystemMirror for i with the IBM Storwize storage servers. This publication provides you with planning information to prepare for using the various PowerHA offerings for the IBM Storwize storage family. It also provides implementation and managing information. Finally, it provides guidance on troubleshooting these solutions and identifies the documentation that you must capture before calling support. This book is part of a four-book volume set that gives you a complete understanding of PowerHA for i by using native disk storage, IBM DS8000 storage servers, or IBM Storwize storage servers. The following publications are part of this PowerHA for i volume set: IBM PowerHA SystemMirror for i: Preparation (Volume 1 of 4), SG24-8400 IBM PowerHA SystemMirror for i: Using DS8000 (Volume 2 of 4), SG24-8403 IBM PowerHA SystemMirror for i: Using Geographic Mirroring (Volume 4 of 4), SG24-8401 Important: The information that is presented in this volume set is for technical consultants, technical support staff, IT architects, and IT specialists who are responsible for providing HA and support for IBM i solutions. If you are new to HA, you should first review the information that is presented in the first book of this volume set, IBM PowerHA SystemMirror for i: Preparation (Volume 1 of 4), SG24-8400, to get a general understanding of clustering technology, independent auxiliary storage pools (IASPs), and the PowerHA architecture.

IBM® PowerHA® SystemMirror® for i is the IBM high-availability (HA), disk-based clustering solution for the IBM i operating system. When PowerHA for i is combined with IBM i clustering technology, PowerHA for i delivers a complete HA and disaster-recovery (DR) solution for business applications that are running in an IBM i environment. Use PowerHA for i to support HA capabilities with either native disk storage, IBM DS8000® storage servers, or IBM Storwize® storage servers. This IBM Redbooks® publication helps you to install, tailor, and configure IBM PowerHA SystemMirror for i to use with geographic mirroring and native storage. This publication provides you with planning information to prepare to use the various PowerHA offerings with geographic mirroring with IBM i native storage. It also provides implementation and management information. It provides guidance about troubleshooting these solutions and identifies the documentation that you need to capture before you call IBM Support. This book is part of a four-book set that gives you a complete understanding of PowerHA for i with native disk storage, IBM DS8000 storage servers, or IBM Storwize storage servers. The following IBM Redbooks publications are part of this PowerHA for i volume set: IBM PowerHA SystemMirror for i: Preparation, SG24-8400 IBM PowerHA SystemMirror for i: Using DS8000, SG24-8403 IBM PowerHA SystemMirror for i: Using IBM Storwize, SG24-8402 Important: The information that is presented in this volume set is for technical consultants, technical support staff, IT architects, and IT specialists who are responsible for providing HA and support for IBM i solutions. If you are new to HA, you need to first review the information that is presented in the first book of this volume set, IBM PowerHA SystemMirror for i: Preparation (Volume 1 of 4), SG24-8400, to obtain a general understanding of clustering technology, independent auxiliary storage pools (IASPs), and the PowerHA architecture.

IBM® PowerHA® SystemMirror® for i is the IBM high-availability (HA), disk-based clustering solution for the IBM i operating system. When PowerHA for i is combined with IBM i clustering technology, it delivers a complete HA and disaster-recovery (DR) solution for business applications that are running in an IBM i environment. You can use PowerHA for i to support HA capabilities with either native disk storage, IBM DS8000® storage servers, or IBM Storwize® storage servers. This IBM Redbooks® publication gives a broad understanding of PowerHA for i and provides a general introduction to clustering technology, independent auxiliary storage pools (IASPs), PowerHA SystemMirror products, and the PowerHA architecture. This book is part of a four-book volume set that gives you a complete understanding of PowerHA for i and its use of native disk storage, IBM DS8000 storage servers, or IBM Storwize storage servers. The following IBM Redbooks publications are part of this PowerHA for i volume set: IBM PowerHA SystemMirror for i: Using DS8000, SG24-8403 IBM PowerHA SystemMirror for i: Using IBM Storwize, SG24-8402. IBM PowerHA SystemMirror for i: Using Geographic Mirroring, SG24-8401 Important: The information that is presented in this volume set is for technical consultants, technical support staff, IT architects, and IT specialists who are responsible for providing HA and support for IBM i solutions. If you are new to HA, first review the information that is presented in this book to get a general understanding of clustering technology, IASPs, and the PowerHA architecture. You can then select the appropriate follow-on book based on the storage solutions that you are planning to use.

This IBM® RedpaperTM publication provides a broad understanding of a new architecture of the IBM Power System E980 (9080-M9S) server that supports IBM AIX®, IBM i, and Linux operating systems (OSes). The objective of this paper is to introduce the major innovative Power E980 offerings and relevant functions: The IBM POWER9TM processor, which is available at frequencies of 3.55 - 4.0 GHz. Significantly strengthened cores and larger caches. Supports up to 64 TB memory. Integrated I/O subsystem and hot-pluggable Peripheral Component Interconnect Express (PCIe) Gen4 slots, double the bandwidth of Gen3 I/O slots. Supports EXP12SX and ESP24SX external disk drawers, which have 12 Gb SAS interfaces and double the existing EXP24S drawer bandwidth. New IBM EnergyScaleTM technology offers new variable processor frequency modes that provide a significant performance boost beyond the static nominal frequency. This publication is for professionals who want to acquire a better understanding of IBM Power SystemsTM products. The intended audience includes the following roles: Clients Sales and marketing professionals Technical support professionals IBM Business Partners Independent software vendors (ISVs) This paper expands the current set of IBM Power Systems documentation by providing a desktop reference that offers a detailed technical description of the Power E980 server. This paper does not replace the current marketing materials and configuration tools. It is intended as an extra source of information that, together with existing sources, can be used to enhance your knowledge of IBM server solutions.

This IBM® RedpaperTM publication gives a broad understanding of a new architecture of the IBM Power System E950 (9040-MR9) server that supports IBM AIX®, and Linux operating systems. The objective of this paper is to introduce the major innovative Power E950 offerings and relevant functions: The IBM POWER9TM processor, which is available at frequencies of 2.8 - 3.4 GHz. Significantly strengthened cores and larger caches. Supports up to 16 TB of memory, which is four times more than the IBM POWER8® processor-based IBM Power System E850 server. Integrated I/O subsystem and hot-pluggable Peripheral Component Interconnect Express (PCIe) Gen4 slots, which have double the bandwidth of Gen3 I/O slots. Supports EXP12SX and ESP24SX external disk drawers, which have 12 Gb Serial Attached SCSI (SAS) interfaces and support Active Optical Cables (AOCs) for greater distances and less cable bulk. New IBM EnergyScaleTM technology offers new variable processor frequency modes that provide a significant performance boost beyond the static nominal frequency. This publication is for professionals who want to acquire a better understanding of IBM Power SystemsTM products. The intended audience includes the following roles: Clients Sales and marketing professionals Technical support professionals IBM Business Partners Independent software vendors (ISVs) This paper expands the current set of Power Systems documentation by providing a desktop reference that offers a detailed technical description of the Power E950 server. This paper does not replace the current marketing materials and configuration tools. It is intended as an extra source of information that, together with existing sources, can be used to enhance your knowledge of IBM server solutions.

IBM® PowerHA® SystemMirror® for i is the IBM high-availability (HA), disk-based clustering solution for the IBM i operating system. When combined with IBM i clustering technology, PowerHA for i delivers a complete HA and disaster recovery (DR) solution for business applications running in an IBM i environment. You can use PowerHA for i to support HA capabilities with either native disk storage, IBM DS8000® storage servers, or IBM Storwize® storage servers. Use this IBM Redbooks® publication to help you install, tailor, and configure IBM PowerHA SystemMirror for i with the IBM Storwize storage servers. This publication provides you with planning information to prepare for using the various PowerHA offerings for the IBM Storwize storage family. It also provides implementation and managing information. Finally, it provides guidance on troubleshooting these solutions and identifies the documentation that you must capture before calling support. This book is part of a four-book volume set that gives you a complete understanding of PowerHA for i by using native disk storage, IBM DS8000 storage servers, or IBM Storwize storage servers. The following publications are part of this PowerHA for i volume set: IBM PowerHA SystemMirror for i: Preparation (Volume 1 of 4), SG24-8400 IBM PowerHA SystemMirror for i: Using DS8000 (Volume 2 of 4), SG24-8403 IBM PowerHA SystemMirror for i: Using Geographic Mirroring (Volume 4 of 4), SG24-8401 Important: The information that is presented in this volume set is for technical consultants, technical support staff, IT architects, and IT specialists who are responsible for providing HA and support for IBM i solutions. If you are new to HA, you should first review the information that is presented in the first book of this volume set, IBM PowerHA SystemMirror for i: Preparation (Volume 1 of 4), SG24-8400, to get a general understanding of clustering technology, independent auxiliary storage pools (IASPs), and the PowerHA architecture.