Ice Accretion And Icing Technology

The effects of inflight atmospheric icing can be devastating to aircraft. Universities and industry have been hard at work to respond to the challenge of maintaining flight safety in all weather conditions. Proposed changes in the regulations for operation in icing conditions are sure to keep this type of research and development at its highest level. This is especially true for the effects of ice crystals in the atmosphere, and for the threat associated with supercooled large drop (SLD) icing. This collection of ten SAE International technical papers brings together vital contributions to the subject. Icing on aircraft surfaces would not be a problem if a material were discovered that prevented the freezing and accretion of supercooled drops. Many options that appeared to have promising icephobic properties have had serious shortfalls in durability. This title addresses, among other topics, the measurement techniques and the drop physics that apply to icing, certification for flight through ice crystal clouds and in supercooled large drops, improvements in predictive techniques, scaling methods, test facilities and techniques, and rotorcraft icing.

This unique book presents ways to mitigate the disastrous effects of snow/ice accumulation and discusses the mechanisms of new coatings deicing technologies. The strategies currently used to combat ice accumulation problems involve chemical, mechanical or electrical approaches. These are expensive and labor intensive, and the use of chemicals raises serious environmental concerns. The availability of truly icephobic surfaces or coatings will be a big boon in preventing the devastating effects of ice accumulation. Currently, there is tremendous interest in harnessing nanotechnology in rendering surfaces icephobic or in devising icephobic surface materials and coatings, and all signals indicate that such interest will continue unabated in the future. As the key issue regarding icephobic materials or coatings is their durability, much effort is being spent in developing surface materials or coatings which can be effective over a long period. With the tremendous activity in this arena, there is strong hope that in the not too distant future, durable surface materials or coatings will come to fruition. This book contains 20 chapters by subject matter experts and is divided into three parts— Part 1: Fundamentals of Ice Formation and Characterization; Part 2: Ice Adhesion and Its Measurement; and Part 3: Methods to Mitigate Ice Adhesion. The topics covered include: factors influencing the formation, adhesion and friction of ice; ice nucleation on solid surfaces; physics of ice nucleation and growth on a surface; condensation frosting; defrosting properties of structured surfaces; relationship between surface free energy and ice adhesion to surfaces; metrology of ice adhesion; test methods for quantifying ice adhesion strength to surfaces; interlaboratory studies of ice adhesion strength; mechanisms of surface icing and deicing technologies; icephobicities of superhydrophobic surfaces; anti-icing using microstructured surfaces; icephobic surfaces: features and challenges; bio-inspired anti-icing surface materials; durability of anti-icing coatings; durability of icephobic coatings; bio-inspired icephobic coatings; protection from ice accretion on aircraft; and numerical modeling and its application to inflight icing.

This unique book presents ways to mitigate the disastrous effects of snow/ice accumulation and discusses the mechanisms of new coatings deicing technologies. The strategies currently used to combat ice accumulation problems involve chemical, mechanical or electrical approaches. These are expensive and labor intensive, and the use of chemicals raises serious environmental concerns. The availability of truly icephobic surfaces or coatings will be a big boon in preventing the devastating effects of ice accumulation. Currently, there is tremendous interest in harnessing nanotechnology in rendering surfaces icephobic or in devising icephobic surface materials and coatings, and all signals indicate that such interest will continue unabated in the future. As the key issue regarding icephobic materials or coatings is their durability, much effort is being spent in developing surface materials or coatings which can be effective over a long period. With the tremendous activity in this arena, there is strong hope that in the not too distant future, durable surface materials or coatings will come to fruition. This book contains 20 chapters by subject matter experts and is divided into three parts— Part 1: Fundamentals of Ice Formation and Characterization; Part 2: Ice Adhesion and Its Measurement; and Part 3: Methods to Mitigate Ice Adhesion. The topics covered include: factors influencing the formation, adhesion and friction of ice; ice nucleation on solid surfaces; physics of ice nucleation and growth on a surface; condensation frosting; defrosting properties of structured surfaces; relationship between surface free energy and ice adhesion to surfaces; metrology of ice adhesion; test methods for quantifying ice adhesion strength to surfaces; interlaboratory studies of ice adhesion strength; mechanisms of surface icing and deicing technologies; icephobicities of superhydrophobic surfaces; anti-icing using microstructured surfaces; icephobic surfaces: features and challenges; bio-inspired anti-icing surface materials; durability of anti-icing coatings; durability of icephobic coatings; bio-inspired icephobic coatings; protection from ice accretion on aircraft; and numerical modeling and its application to inflight icing.

Icing tests were conducted to document ice shapes formed on three different two-dimensional airfoils and to study the effects of the accreted ice on aerodynamic performance. The models tested were representative of airfoil designs in current use for each of the commercial transport, business jet, and general aviation categories of aircraft. The models were subjected to a range of icing conditions in an icing wind tunnel. The conditions were selected primarily from the Federal Aviation Administration's Federal Aviation Regulations 25 Appendix C atmospheric icing conditions. A few large droplet icing conditions were included. To verify the aerodynamic performance measurements, molds were made of selected ice shapes formed in the icing tunnel. Castings of the ice were made from the molds and placed on a model in a dry, low-turbulence wind tunnel where precision aerodynamic performance measurements were made. Documentation of all the ice shapes and the aerodynamic performance measurements made during the icing tunnel tests is included in this report. Results from the dry, low-turbulence wind tunnel tests are also presented.

Wind Turbine Icing Physics and Anti-/De-Icing Technology gives a comprehensive update of research on the underlying physics pertinent to wind turbine icing and the development of various effective and robust anti-/de-icing technology for wind turbine icing mitigation. The book introduces the most recent research results derived from both laboratory studies and field experiments. Specifically, the research results based on field measurement campaigns to quantify the characteristics of the ice structures accreted over the blades surfaces of utility-scale wind turbines by using a Supervisory Control and Data Acquisition (SCADA) system and an Unmanned-Aerial-Vehicle (UAV) equipped with a high-resolution digital camera are also introduced. In addition, comprehensive lab experimental studies are explored, along with a suite of advanced flow diagnostic techniques, a detailed overview of the improvements, and the advantages and disadvantages of state-of-the-art ice mitigation strategies. This new addition to the Wind Energy Engineering series will be useful to all researchers and industry professionals who address icing issues through testing, research and industrial innovation. Covers detailed improvements and the advantages/disadvantages of state-of-the-art ice mitigation strategies Includes condition monitoring contents for lab-scale experiments and field tests Presents the potential of various bio-inspired icephobic coatings of wind turbine blades

This volume presents the conference proceedings from FinDrones2020. The book highlights recent developments in drone technology by experts, academicians, and entrepreneurs for applications in agriculture, forestry, and other industries. Emphasis is placed on contextualizing the conference presentations and content to Finland and the unique challenges typical to this region. The work will be of interest to academicians and professionals involved in remote sensing applications of unmanned aerial vehicles, as well as enthusiasts of drone technological developments.

Atmospheric ice takes a wide range of fascinating forms, all beautiful in their own ways but many posing severe risk to the security of overhead networks for electric power, communications and other systems. This comprehensive book documents the fundamentals of atmospheric icing and surveys the state of the art in eight chapters, each written by a team of experienced and internationally renowned experts. The treatment is detailed and richly illustrated. The presentation follows a logical sequence, starting with the icing climate and meteorological conditions, proceeding through development of observations and models of accretion and release of ice and heavy snow, then considering static and dynamic mechanical loads, the effects of ice and snow on electrical insulation, de-icing, ice prevention and mitigation methods. The statistical analysis of icing data and the mathematical and numerical modelling support appropriate mechanical and electrical design processes for icing conditions on overhead lines. Technical specialists, researchers and students in engineering and environmental science will all find value throughout the text.