Identifying Future Drinking Water Contaminants

With an increasing population, use of new and diverse chemicals that can enter the water supply, and emergence of new microbial pathogens, the U.S. federal government is faced with a regulatory dilemma: Where should it focus its attention and limited resources to ensure safe drinking water supplies for the future? Identifying Future Drinking Water Contaminants is based on a 1998 workshop on emerging drinking water contaminants. It includes a dozen papers that were presented on new and emerging microbiological and chemical drinking water contaminants, associated analytical and water treatment methods for their detection and removal, and existing and proposed environmental databases to assist in their proactive identification and regulation. The papers are preceded by a conceptual approach and related recommendations to EPA for the periodic creation of future Drinking Water Contaminant Candidate Lists (CCLsâ€"produced every five yearsâ€"include currently unregulated chemical and microbiological substances that are known or anticipated to occur in public water systems and that may pose health risks).

With an increasing population, use of new and diverse chemicals that can enter the water supply, and emergence of new microbial pathogens, the U.S. federal government is faced with a regulatory dilemma: Where should it focus its attention and limited resources to ensure safe drinking water supplies for the future? Identifying Future Drinking Water Contaminants is based on a 1998 workshop on emerging drinking water contaminants. It includes a dozen papers that were presented on new and emerging microbiological and chemical drinking water contaminants, associated analytical and water treatment methods for their detection and removal, and existing and proposed environmental databases to assist in their proactive identification and regulation. The papers are preceded by a conceptual approach and related recommendations to EPA for the periodic creation of future Drinking Water Contaminant Candidate Lists (CCLsâ€"produced every five yearsâ€"include currently unregulated chemical and microbiological substances that are known or anticipated to occur in public water systems and that may pose health risks).

Americans drink many gallons of tap water every day, but many of them question the safety of tap water every day as well. In fact, devices have been created to filter tap water directly before reaching cups. It's true; however, that the provision and management of safe drinking water throughout the United States have seen triumphs in public health since the beginning of the 20th century. Although, advances in water treatment, source water protection efforts, and the presence of local, state, and federal regulatory protection have developed over the years, water in the United States still contain chemical, microbiological, and other types of contaminants at detectable and at times harmful levels. This in addition to the growth of microbial pathogens that can resist traditional water treatment practices have led to the question: Where and how should the U.S. government focus its attention and limited resources to ensure safe drinking water supplies for the future? To deal with these issues the Safe Drinking Water Act (SDWA) Amendments of 1996 Safe included a request that the U.S. Environmental Protection Agency (EPA) publish a list of unregulated chemical and microbial contaminants and contaminant groups every five years that are or could pose risks in the drinking water of public water systems. The first list, called the Drinking Water Contaminant Candidate List (CCL), was published in March 1998. The main function of the CCL is to provide the basis for deciding whether to regulate at least five new contaminants from the CCL every five years. However, since additional research and monitoring need to be conducted for most of the contaminants on the 1998 CCL, the list is also used to prioritize these related activities. Classifying Drinking Water Contaminants for Regulatory Consideration is the third report by the Committee on Dinking Water Contaminants with the purpose of providing advice regarding the setting of priorities among drinking water contaminants in order to identify those contaminants that pose the greatest threats to public health. The committee is comprised of 14 volunteer experts in water treatment engineering, toxicology, public health, epidemiology, water and analytical chemistry, risk assessment, risk communication, public water system operations, and microbiology and is jointly overseen by the National Research Council's (NRC'S) Water Science and Technology Board and Board on Environmental Studies and Toxicology. In this report the committee needed to readdress its second report as well as explore the feasibility of developing and using mechanisms for identifying emerging microbial pathogens for research and regulatory activities. The promotion of public health remains the guiding principle of the committee's recommendations and conclusions in this report.

The provision of safe drinking water has been an important factor in the improvement of the health status of U.S. communities since the turn of the last century. Nonetheless, outbreaks of waterborne disease and incidences of chemical contamination of drinking water continue to occur. Setting Priorities for Drinking Water Contaminants recommends a new process for the U.S. Environmental Protection Agency to use in deciding which potential drinking water contaminants should be regulated in public water supplies to provide the greatest protection against waterborne illnesses. The book covers chemical and microbiological contaminants and includes a historical review of past approaches to setting priorities for drinking water contaminants and other environmental pollutants. It emphasizes the need for expert judgment in this process and for a conservative approach that considers public health protection as the first priority.

This volume describes the methods used in the surveillance of drinking water quality in the light of the special problems of small-community supplies, particularly in developing countries, and outlines the strategies necessary to ensure that surveillance is effective.

The Drinking Water Act Amendments of 1996 instituted wide-ranging regulatory changes to the seminal Safe Drinking Water Act (SDWA)-such as providing funding to communities facing health risks, focusing regulatory efforts on contaminants posing such health risks, and adding flexibility to the regulatory process- and the amendments continue to shape regulations and regulatory policy to this day. Editor Frederick Pontius's Drinking Water Regulation and Health provides a comprehensive, up-to-date resource on the current regulatory landscape. Drinking Water Regulation and Health serves as a guide for water utilities, regulators, and consultants, forecasting future trends and explaining the latest developments in regulations. A diverse group of contributors covers topics such as water treatment, water protection, how some of the regulations have been interpreted in the courts, how water utilities can stay in compliance, and how to satisfy customer expectations, especially sensitive subpopulations. Divided into four sections - The SDWA and Public Health, Regulation Development, Contaminant Regulation and Treatment, and Compliance Challenges - the book includes chapters on: * Improving Waterborne Disease Surveillance * Application of Risk Assessments in Crafting Drinking Water Regulations * Control of Drinking Water Pathogens and Disinfection By-Products * Selection of Treatment Technology for SDWA Compliance * Death of the Silent Service: Meeting Consumer Expectations * Achieving Sustainable Water Systems * What Water Suppliers Need to Know About Toxic Tort Litigation