Idihom Industrialization Of High Order Methods A Top Down Approach

The book describes the main findings of the EU-funded project IDIHOM (Industrialization of High-Order Methods – A Top-Down Approach). The goal of this project was the improvement, utilization and demonstration of innovative higher-order simulation capabilities for large-scale aerodynamic application challenges in the aircraft industry. The IDIHOM consortium consisted of 21 organizations, including aircraft manufacturers, software vendors, as well as the major European research establishments and several universities, all of them with proven expertise in the field of computational fluid dynamics. After a general introduction to the project, the book reports on new approaches for curved boundary-grid generation, high-order solution methods and visualization techniques. It summarizes the achievements, weaknesses and perspectives of the new simulation capabilities developed by the project partners for various industrial applications, and includes internal- and external-aerodynamic as well as multidisciplinary test cases.

The differential quadrature hierarchical finite element method (DQHFEM) was proposed by Bo Liu. This method incorporated the advantages and the latest research achievements of the hierarchical finite element method (HFEM), the differential quadrature method (DQM) and the isogeometric analysis (IGA). The DQHFEM also overcame many limitations or difficulties of the three methods.This unique compendium systemically introduces the construction of various DQHFEM elements of commonly used geometric shapes like triangle, tetrahedrons, pyramids, etc. Abundant examples are also included such as statics and dynamics, isotropic materials and composites, linear and nonlinear problems, plates as well as shells and solid structures.This useful reference text focuses largely on numerical algorithms, but also introduces some latest advances on high order mesh generation, which often has been regarded as the major bottle neck for the wide application of high order FEM.

The book contains a selection of high quality papers, chosen among the best presentations during the International Conference on Spectral and High-Order Methods (2014), and provides an overview of the depth and breadth of the activities within this important research area. The carefully reviewed selection of papers will provide the reader with a snapshot of the state-of-the-art and help initiate new research directions through the extensive biography.

Um die komplexe Physik in kompressiblen Strömungen genauer zu verstehen, kommen vermehrt Simulationen zum Einsatz. Jedoch können weit verbreitete kommerzielle Softwarepakete die Physik aufgrund ihrer niedrigen Genauigkeit oft nicht korrekt erfassen. In dieser Arbeit wird eine diskontinuierliche Galerkin Methode mit hoher Ordnung entwickelt, welche eine hohe Genauigkeit erzielt. Dabei werden insbesondere zwei Probleme, die im Kontext von Verfahren mit hoher Ordnung auftreten, behandelt. Zum einen wird die Gittergenerierung durch das Verwenden einer Immersed Boundary Methode deutlich vereinfacht. Dies bedeutet, dass die Problemgeometrie aus einem deutlich einfacheren Hintergrundgitter herausgeschnitten wird. Die Geometrie wird mit Hilfe einer Level-Set Funktion dargestellt, und die Integration auf den entstehenden geschnittenen Zellen wird mittels einer hierarchischen Moment-Fitting Quadratur durchgeführt. Das Problem der sehr kleinen oder stark gekrümmten Zellen wird durch Zellagglomeration gelöst. Zum zweiten wird die starke Zeitschrittbeschränkung durch anisotrope Gitter mit Hilfe eines lokalen Zeitschrittverfahrens behoben. Diverse numerische Experimente bestätigen die hohe Genauigkeit, Effizienz und geometrische Flexibilität der vorgestellten Methode.

The most powerful computers work by harnessing the combined computational power of millions of processors, and exploiting the full potential of such large-scale systems is something which becomes more difficult with each succeeding generation of parallel computers. Alternative architectures and computer paradigms are increasingly being investigated in an attempt to address these difficulties. Added to this, the pervasive presence of heterogeneous and parallel devices in consumer products such as mobile phones, tablets, personal computers and servers also demands efficient programming environments and applications aimed at small-scale parallel systems as opposed to large-scale supercomputers. This book presents a selection of papers presented at the conference: Parallel Computing (ParCo2017), held in Bologna, Italy, on 12 to 15 September 2017. The conference included contributions about alternative approaches to achieving High Performance Computing (HPC) to potentially surpass exa- and zetascale performances, as well as papers on the application of quantum computers and FPGA processors. These developments are aimed at making available systems better capable of solving intensive computational scientific/engineering problems such as climate models, security applications and classic NP-problems, some of which cannot currently be managed by even the most powerful supercomputers available. New areas of application, such as robotics, AI and learning systems, data science, the Internet of Things (IoT), and in-car systems and autonomous vehicles were also covered. As always, ParCo2017 attracted a large number of notable contributions covering present and future developments in parallel computing, and the book will be of interest to all those working in the field.

This book presents a snapshot of the state-of-art in the field of turbulence modeling, with an emphasis on numerical methods. Topics include direct numerical simulations, large eddy simulations, compressible turbulence, coherent structures, two-phase flow simulation and many more. It includes both theoretical contributions and experimental works, as well as chapters derived from keynote lectures, presented at the fourth Turbulence and Interactions Conference (TI 2015), which was held on June 11-14 in Cargèse, Corsica, France. This multifaceted collection, which reflects the conference ́s emphasis on the interplay of theory, experiments and computing in the process of understanding and predicting the physics of complex flows and solving related engineering problems, offers a timely guide for students, researchers and professionals in the field of applied computational fluid dynamics, turbulence modeling and related areas.

This book offers detailed insights into new methods for high-fidelity CFD, and their industrially relevant applications in aeronautics. It reports on the H2020 TILDA project, funded by the European Union in 2015-2018. The respective chapters demonstrate the potential of high-order methods for enabling more accurate predictions of non-linear, unsteady flows, ensuring enhanced reliability in CFD predictions. The book highlights industrially relevant findings and representative test cases on the development of high-order methods for unsteady turbulence simulations on unstructured grids; on the development of the LES/DNS methodology by means of multilevel, adaptive, fractal and similar approaches for applications on unstructured grids; and on leveraging existent large-scale HPC networks to facilitate the industrial applications of LES/DNS in daily practice. Furthermore, the book discusses multidisciplinary applications of high-order methods in the area of aero-acoustics. All in all, it offers timely insights into the application and performance of high-order methods for CFD, and an extensive reference guide for researchers, graduate students, and industrial engineers whose work involves CFD and turbulence modeling.

The book introduces modern high-order methods for computational fluid dynamics. As compared to low order finite volumes predominant in today's production codes, higher order discretizations significantly reduce dispersion errors, the main source of error in long-time simulations of flow at higher Reynolds numbers. A major goal of this book is to teach the basics of the discontinuous Galerkin (DG) method in terms of its finite volume and finite element ingredients. It also discusses the computational efficiency of high-order methods versus state-of-the-art low order methods in the finite difference context, given that accuracy requirements in engineering are often not overly strict. The book mainly addresses researchers and doctoral students in engineering, applied mathematics, physics and high-performance computing with a strong interest in the interdisciplinary aspects of computational fluid dynamics. It is also well-suited for practicing computational engineers who would like to gain an overview of discontinuous Galerkin methods, modern algorithmic realizations, and high-performance implementations.