In Situ Remediation Engineering

In Situ Remediation Engineering provides a comprehensive guide to the design and implementation of reactive zone methods for treatment of all major classes of groundwater contamination. It teaches the fundamentals that underlie development of cost-effective reactive zone strategies, guides the selection of cost-effective remedial strategies and provides environmental engineers and scientists with tools to achieve optimal deployment of source area, reactive barrier, and site-wide treatments. It offers extensive coverage of remedial system operation, discussing reagent injection strategies, interpretation of process monitoring results for biological and chemical reactive zone systems, and impacts of treatment processes on aquifer hydraulic characteristics.

"This second edition of Remediation Engineering will continue to be the seminal handbook that regulators must have on-hand to address any of the remediation issues they are grappling with daily. The book is wide-ranging, but specific enough to address any environmental remediation challenge." —Patricia Reyes, Interstate Technology Regulatory Council, Washington, DC, USA "This book offers the researcher, teacher, practitioner, student, and regulator with state-of-the-art advances in conducting site investigations and remediation for common and emerging contaminants. It is revolutionary in its approach to conducting subsurface investigation, which greatly influences a successful and appropriate response in assessing and addressing environmental risk. This book is a giant leap forward in understanding how contaminates behave and how to reduce risk to acceptable levels in the natural world." —Daniel T. Rogers, Amsted Industries Incorporated, Chicago, Illinois, USA "This text is a superb reference and a good tool for learning about state-of-the-art techniques in remediation of soil and groundwater. [It] will become a ready reference at many companies as the engineering community creates increased value from remediation efforts around the world." —John Waites, AVX Corporation, Fountain Inn, South Carolina, USA Remediation Engineering was first published in 1996 and quickly became the go-to reference for a relatively young industry, offering the first comprehensive look at the state-of-the-science in treatment technologies of the time and the contaminants they applied to. This fully updated Second Edition will capture the fundamental advancements that have taken place during the last two decades within all the subdisciplines that form the foundation of the remediation engineering platform. It covers the entire spectrum of current technologies that are employed in the industry and also discusses future trends and how practitioners should anticipate and adapt to those needs. Features: Shares the latest paradigms in remediation design approach and contaminant hydrogeology Presents the landscape of new and emerging contaminants Details the current state of the practice for both conventional technologies, such as sparging and venting Examines newer technologies such as dynamic groundwater recirculation and injection-based remedies to address both organic and inorganic contaminants. Describes the advances in site characterization concepts such as smart investigations and digital conceptual site models. Includes all-new color photographs and figures.

In many cases, the application of in situ technologies evolved as a necessity from a cost perspective. However, the basic understanding of the mechanisms and theory behind these technologies was treated as a "black box." Although we have seen some tremendous successes in the application of remediation technologies over the past several years, we have also seen many cases in which a technology has been incorrectly or inappropriately applied. In most cases, this misapplication has been the result of a poor understanding of the basic concepts and mechanisms behind the technologies. Without proper understanding, the potential for misapplication of technologies remains a serious economic and technical threat.

In Situ Remediation Engineering provides a comprehensive guide to the design and implementation of reactive zone methods for treatment of all major classes of groundwater contamination. It teaches the fundamentals that underlie development of cost-effective reactive zone strategies, guides the selection of cost-effective remedial strategies and provides environmental engineers and scientists with tools to achieve optimal deployment of source area, reactive barrier, and site-wide treatments. It offers extensive coverage of remedial system operation, discussing reagent injection strategies, interpretation of process monitoring results for biological and chemical reactive zone systems, and impacts of treatment processes on aquifer hydraulic characteristics.

Completely revised and updated, the second edition of the bestselling In Situ Treatment Technology adds three new chapters to provide the reader with an even more comprehensive reference source on remediation. This authoritative book goes beyond discussion of individual in situ technologies by providing an understanding of the geologic foundation, the strengths and limitations of each of the technologies, and the details necessary to implement them. It also integrates all chapters to show how these technologies fit together to make a particular remediation method simultaneously the best technical and the most cost-effective design. The latest updates from the EPA and DOD, as well the inclusion of new material, affords you the detailed knowledge necessary to design a full-scale treatment system. New in this edition are sections in three of the chapters that provide the specific calculations necessary to design an actual treatment system. In Situ Treatment Technology, Second Edition is a comprehensive reference source.

This volume provides comprehensive up-to-date descriptions of the principles and practices of in situ chemical oxidation (ISCO) for groundwater remediation based on a decade of intensive research, development, and demonstrations, and lessons learned from commercial field applications.

In the late 1970s and early 1980s, our nation began to grapple with the legacy of past disposal practices for toxic chemicals. With the passage in 1980 of the Comprehensive Envir- mental Response, Compensation, and Liability Act (CERCLA), commonly known as Sup- fund, it became the law of the land to remediate these sites. The U. S. Department of Defense (DoD), the nation’s largest industrial organization, also recognized that it too had a legacy of contaminated sites. Historic operations at Army, Navy, Air Force, and Marine Corps facilities, ranges, manufacturing sites, shipyards, and depots had resulted in widespread contamination of soil, groundwater, and sediment. While Superfund began in 1980 to focus on remediation of heavily contaminated sites largely abandoned or neglected by the private sector, the DoD had already initiated its Installation Restoration Program in the mid-1970s. In 1984, the DoD began the Defense Environmental Restoration Program (DERP) for contaminated site assessment and remediation. Two years later, the U. S. Congress codified the DERP and directed the Secretary of Defense to carry out a concurrent program of research, development, and demonstration of innovative remediation technologies. As chronicled in the 1994 National Research Council report, “Ranking Hazardous-Waste Sites for Remedial Action,” our early estimates on the cost and suitability of existing techn- ogies for cleaning up contaminated sites were wildly optimistic. Original estimates, in 1980, projected an average Superfund cleanup cost of a mere $3.

This volume is meant to provide the practitioner with information on the natural mixing processes occurring in aquifers as well as to describe basic strategies that can be implemented to enhance mixing in particular cases. For example, when it comes to mixing miscible liquids, one can speed up mixing in the formation by manipulating the flow such as through the use of recirculation wells. Furthermore, much of the mixing can be achieved partially within recirculation wells themselves, where contaminated water is admixed with additives, volatile products may be removed through a vapor mass exchanger, etc. Thus, adding mixing wells can significantly increase the performance of the delivery and mixing system and speed up the process of remediation.