Long Term Isothermal Aging Effects On Weight Loss Compression Properties And Dimensions Of T650 35 Fabric Reinforced Pmr 15 Composites Data

A cooperative program was conducted with the General Electric Aircraft Engines plant in Evendale, Ohio, to study the effects of long-term isothermal aging at elevated temperatures on compression and thermal durability properties of T650 35 fabric-reinforced PMR 15 composites. This degradation study was conducted over an approximate time period of 3 1/2 yr. The aging temperatures were 204, 260, 288, 316, and 343 C. Specimens of different dimensions were evaluated. Specimens with ratios of the cut edge to total surface area of 0.03 to 0.89 were fabricated and aged. The aged and unaged specimens were tested in compression as specified in Test Method for Compressive Properties of Rigid Plastics (ASTM D695M). Thickness changes, degraded surface layer growth, weight loss, and failure modes were monitored and recorded. All property changes were thickness dependent.Bowles, Kenneth J. and Tsuji, Luis and Kamvouris, John and Roberts, Gary D.Glenn Research CenterAGING (MATERIALS); ISOTHERMAL PROCESSES; FABRICATION; MECHANICAL PROPERTIES; POLYIMIDES; STRUCTURAL WEIGHT; COMPRESSIBILITY; COMPOSITE MATERIALS; FAILURE MODES; DURABILITY; PLASTICS; THICKNESS; DEGRADATION; SURFACE LAYERS; HIGH TEMPERATURE

Ageing of composites is a highly topical subject given the increasing use of composites in structural applications in many industries. Ageing of composites addresses many of the uncertainties about the long-term performance of composites and how they age under conditions encountered in service. The first part of the book reviews processes and modelling of composite ageing including physical and chemical ageing of polymeric composites, ageing of glass-ceramic matrix composites, chemical ageing mechanisms, stress corrosion cracking, thermo-oxidative ageing, spectroscopy of ageing composites, modelling physical and accelerated ageing and ageing of silicon carbide composites. Part two examines ageing of composites in transport applications including aircraft, vehicles and ships. Part three reviews ageing of composites in non-transport applications such as implants in medical devices, oil and gas refining, construction, chemical processing and underwater applications. With its distinguished editor and international team of contributors, Ageing of composites is a valuable reference guide for composite manufacturers and developers. It also serves as a source of information for material scientists, designers and engineers in industries that use composites, including transport, chemical processing and medical engineering. Addresses many of the uncertainties about the long-term performance of composites and how they age under conditions encountered in service Reviews processes and modelling of composite ageing including chemical ageing mechanisms and stress corrosion cracking Discusses ageing of composites in both transport and non-transport applications ranging from aircraft to implants in medical devices

This book presents the state-of-the-art in multiscale modeling and simulation techniques for composite materials and structures. It focuses on the structural and functional properties of engineering composites and the sustainable high performance of components and structures. The multiscale techniques can be also applied to nanocomposites which are important application areas in nanotechnology. There are few books available on this topic.

This the third volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 56 chapters on Time-Dependent Constitutive Fracture and Failure. It presents early findings from experimental and computational investigations on Time Dependent Materials including contributions on Thermal and Mechanical Characterization, Coupled Experimental and Computational Analysis of Fracture Path Selection, Procedures for Mixed Mode Fracture Testing of Bonded Beams, and Experimental Study of Voids in High Strength Aluminum Alloys.

Over 190 original papers covering all phases of composite materials engineering are contained in this searchable CD-ROM. The papers, published here for the first time, describe a wide range of materials science research reported at the annual meeting of the American Society for Composites, held Sept. 26-28, 2011, in collaboration with the Canadian Association for Composite Structures and Materials. Major divisions of the document include: Bio-Inspired Composites; Damage; Dynamic Effects on Composites; Nanotechnology; Manufacturing; Mechanical Behavior; Failure and Fatigue; Office of Naval Research; Penetration; Properties; Structural Applications; Textiles; and Time-Dependent Response. The CD-ROM displays figures and illustrations in articles in full color along with a title screen and main menu screen. Each user can link to all papers from the Table of Contents and Author Index and also link to papers and front matter by using the global bookmarks which allow navigation of the entire CD-ROM from every article. Search features on the CD-ROM can be by full text including all key words, article title, author name, and session title. The CD-ROM has Autorun feature for Windows 2000 with Service Pack 4 or higher products along with the program for Adobe Acrobat Reader with Search 9.0. One year of technical support is included with your purchase of this product.

Composite material systems are the basis for much of the natural world around us and are rapidly becoming the basis for many modern engineering components. A controlling feature for the general use of such systems is their damage tolerance, durability and reliability. The present book is a comprehensive cross section of the state of the art in the field of the durability of polymer-based, composite, and adhesive systems. As such, it is of special value to researchers concerned with the frontier of the field, to students concerned with the substance of the subject, and to the applied community concerned with the finding methodologies that make it possible to design safe and durable engineering components using material systems.

Long-Term Durability of Polymeric Matrix Composites presents a comprehensive knowledge-set of matrix, fiber and interphase behavior under long-term aging conditions, theoretical modeling and experimental methods. This book covers long-term constituent behavior, predictive methodologies, experimental validation and design practice. Readers will also find a discussion of various applications, including aging air craft structures, aging civil infrastructure, in addition to engines and high temperature applications.