Low Energy Fpgas Architecture And Design

Low-Energy FPGAs: Architecture and Design is a primary resource for both researchers and practicing engineers in the field of digital circuit design. The book addresses the energy consumption of Field-Programmable Gate Arrays (FPGAs). FPGAs are becoming popular as embedded components in computing platforms. The programmability of the FPGA can be used to customize implementations of functions on an application basis. This leads to performance gains, and enables reuse of expensive silicon. Chapter 1 provides an overview of digital circuit design and FPGAs. Chapter 2 looks at the implication of deep-submicron technology onFPGA power dissipation. Chapter 3 describes the exploration environment to guide and evaluate design decisions. Chapter 4 discusses the architectural optimization process to evaluate the trade-offs between the flexibility of the architecture, and the effect on the performance metrics. Chapter 5 reviews different circuit techniques to reduce the performance overhead of some of the dominant components. Chapter 6 shows methods to configure FPGAs to minimize the programming overhead. Chapter 7 addresses the physical realization of some of the critical components and the final implementation of a specific low-energy FPGA. Chapter 8 compares the prototype array to an equivalent commercial architecture.

Low-Power Design of Nanometer FPGAs Architecture and EDA is an invaluable reference for researchers and practicing engineers concerned with power-efficient, FPGA design. State-of-the-art power reduction techniques for FPGAs will be described and compared. These techniques can be applied at the circuit, architecture, and electronic design automation levels to describe both the dynamic and leakage power sources and enable strategies for codesign. Low-power techniques presented at key FPGA design levels for circuits, architectures, and electronic design automation, form critical, "bridge" guidelines for codesign Comprehensive review of leakage-tolerant techniques empowers designers to minimize power dissipation Provides valuable tools for estimating power efficiency/savings of current, low-power FPGA design techniques

Welcome to the proceedings of PATMOS 2005, the 15th in a series of international workshops.PATMOS2005wasorganizedbyIMECwithtechnicalco-sponsorshipfrom the IEEE Circuits and Systems Society. Over the years, PATMOS has evolved into an important European event, where - searchers from both industry and academia discuss and investigate the emerging ch- lenges in future and contemporary applications, design methodologies, and tools - quired for the developmentof upcominggenerationsof integrated circuits and systems. The technical program of PATMOS 2005 contained state-of-the-art technical contri- tions, three invited talks, a special session on hearing-aid design, and an embedded - torial. The technical program focused on timing, performance and power consumption, as well as architectural aspects with particular emphasis on modeling, design, char- terization, analysis and optimization in the nanometer era. The Technical Program Committee, with the assistance of additional expert revi- ers, selected the 74 papers to be presented at PATMOS. The papers were divided into 11 technical sessions and 3 poster sessions. As is always the case with the PATMOS workshops, the review process was anonymous, full papers were required, and several reviews were carried out per paper. Beyond the presentations of the papers, the PATMOS technical program was - riched by a series of speeches offered by world class experts, on important emerging research issues of industrial relevance. Prof. Jan Rabaey, Berkeley, USA, gave a talk on “Traveling the Wild Frontier of Ulta Low-Power Design”, Dr. Sung Bae Park, S- sung, gave a presentation on “DVL (Deep Low Voltage): Circuits and Devices”, Prof.

This book constitutes the refereed proceedings of the 16th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS 2006. The book presents 41 revised full papers and 23 revised poster papers together with 4 key notes and 3 industrial abstracts. Topical sections include high-level design, power estimation and modeling memory and register files, low-power digital circuits, busses and interconnects, low-power techniques, applications and SoC design, modeling, and more.

Fine- and Coarse-Grain Reconfigurable Computing gives the basic concepts and building blocks for the design of Fine- (or FPGA) and Coarse-Grain Reconfigurable Architectures. Recently-developed integrated architecture design and software-supported design flow of FPGA and coarse-grain reconfigurable architecture are also described. Part I consists of two extensive surveys of FPGA and Coarse-Grain Reconfigurable Architectures. In Part II, case studies, innovative research results about reconfigurable architectures and design frameworks from three projects AMDREL, MOLEN and ADRES and DRESC, and, a new classification according to microcoded architectural criteria are described. Fine- and Coarse-Grain Reconfigurable Computing is an essential reference for researchers and professionals and can be used as a textbook by undergraduate, graduate students and professors.

On behalf of the ProgramCommittee, we are pleased to present the proceedings of the 2005 Asia-Paci?c Computer Systems Architecture Conference (ACSAC 2005) held in the beautiful and dynamic country of Singapore. This conference was the tenth in its series, one of the leading forums for sharing the emerging research ?ndings in this ?eld. In consultation with the ACSAC Steering Committee, we selected a - member Program Committee. This Program Committee represented a broad spectrum of research expertise to ensure a good balance of research areas, - stitutions and experience while maintaining the high quality of this conference series. This year’s committee was of the same size as last year but had 19 new faces. We received a total of 173 submissions which is 14% more than last year. Each paper was assigned to at least three and in some cases four ProgramC- mittee members for review. Wherever necessary, the committee members called upon the expertise of their colleagues to ensure the highest possible quality in the reviewing process. As a result, we received 415 reviews from the Program Committee members and their 105 co-reviewers whose names are acknowledged inthe proceedings.Theconferencecommitteeadopteda systematicblind review process to provide a fair assessment of all submissions. In the end, we accepted 65 papers on a broad range of topics giving an acceptance rate of 37.5%. We are grateful to all the Program Committee members and the co-reviewers for their e?orts in completing the reviews within a tight schedule.

This book constitutes the refereed proceedings of the Third International Workshop on Applied Reconfigurable Computing, ARC 2007, held in Mangaratiba, Brazil, in March 2007. The 27 full papers and 10 short papers presented together with a late-comer contribution from ARC 2006 are organized in topical sections on architectures, mapping techniques and tools, arithmetic, and applications.

Design considerations for low-power operations and robustness with respect to variations typically impose contradictory requirements. Low-power design techniques such as voltage scaling, dual-threshold assignment and gate sizing can have large negative impact on parametric yield under process variations. This book focuses on circuit/architectural design techniques for achieving low power operation under parameter variations. We consider both logic and memory design aspects and cover modeling and analysis, as well as design methodology to achieve simultaneously low power and variation tolerance, while minimizing design overhead. This book will discuss current industrial practices and emerging challenges at future technology nodes.