Mathematical Modelling And Computer Simulation Of Biomechanical Systems

The book presents a new scientific approach to the problem of biomechanical systems description.This approach is based on development of a universal anthropomorphic model and employment of methodology of imitational dynamic modeling (IDM). The novelty of this approach is that there appears a possibility to operate with a whole class of models, derived from the universal model on the basis of motion separation principle. This is followed by utilization of iterational procedures realizing the method of successive approximations and resulting in description of the real motion with the pre-set accuracy level. By use of the IDM there has been for the first time ascertained certain laws governing human locomotions: presence of so-called controlling and stabilizing interlink moments, wavelike speeding of forces extremums along the kinematic chain, adaptation of control functions for astronauts motion coordination preservation. The book includes new theoretical conceptions explaining the deterioration of functional state of skeletal-muscular apparatus of astronauts due to zero-gravity influence.

An overview of biomechanical modeling of human soft tissue using nonlinear theoretical mechanics and incremental finite element methods, useful for computer simulation of the human musculoskeletal system.

Cutting-edge solutions to current problems in orthopedics, supported by modeling and numerical analysis Despite the current successful methods and achievements of good joint implantations, it is essential to further optimize the shape of implants so they may better resist extreme long-term mechanical demands. This book provides the orthopedic, biomechanical, and mathematical basis for the simulation of surgical techniques in orthopedics. It focuses on the numerical modeling of total human joint replacements and simulation of their functions, along with the rigorous biomechanics of human joints and other skeletal parts. The book includes: An introduction to the anatomy and biomechanics of the human skeleton, biomaterials, and problems of alloarthroplasty The definition of selected simulated orthopedic problems Constructions of mathematical model problems of the biomechanics of the human skeleton and its parts Replacement parts of the human skeleton and corresponding mathematical model problems Detailed mathematical analyses of mathematical models based on functional analysis and finite element methods Biomechanical analyses of particular parts of the human skeleton, joints, and corresponding replacements A discussion of the problems of data processing from nuclear magnetic resonance imaging and computer tomography This timely book offers a wealth of information on the current research in this field. The theories presented are applied to specific problems of orthopedics. Numerical results are presented and discussed from both biomechanical and orthopedic points of view and treatment methods are also briefly addressed. Emphasis is placed on the variational approach to the investigated model problems while preserving the orthopedic nature of the investigated problems. The book also presents a study of algorithmic procedures based on these simulation models. This is a highly useful tool for designers, researchers, and manufacturers of joint implants who require the results of suggested experiments to improve existing shapes or to design new shapes. It also benefits graduate students in orthopedics, biomechanics, and applied mathematics.

Numerical Methods and Advanced Simulation in Biomechanics and Biological Processes covers new and exciting modeling methods to help bioengineers tackle problems for which the Finite Element Method is not appropriate. The book covers a wide range of important subjects in the field of numerical methods applied to biomechanics, including bone biomechanics, tissue and cell mechanics, 3D printing, computer assisted surgery and fluid dynamics. Modeling strategies, technology and approaches are continuously evolving as the knowledge of biological processes increases. Both theory and applications are covered, making this an ideal book for researchers, students and R&D professionals. Provides non-conventional analysis methods for modeling Covers the Discrete Element Method (DEM), Particle Methods (PM), MessLess and MeshFree Methods (MLMF), Agent-Based Methods (ABM), Lattice-Boltzmann Methods (LBM) and Boundary Integral Methods (BIM) Includes contributions from several world renowned experts in their fields Compares pros and cons of each method to help you decide which method is most applicable to solving specific problems

Cutting-edge solutions to current problems in orthopedics, supported by modeling and numerical analysis Despite the current successful methods and achievements of good joint implantations, it is essential to further optimize the shape of implants so they may better resist extreme long-term mechanical demands. This book provides the orthopedic, biomechanical, and mathematical basis for the simulation of surgical techniques in orthopedics. It focuses on the numerical modeling of total human joint replacements and simulation of their functions, along with the rigorous biomechanics of human joints and other skeletal parts. The book includes: An introduction to the anatomy and biomechanics of the human skeleton, biomaterials, and problems of alloarthroplasty The definition of selected simulated orthopedic problems Constructions of mathematical model problems of the biomechanics of the human skeleton and its parts Replacement parts of the human skeleton and corresponding mathematical model problems Detailed mathematical analyses of mathematical models based on functional analysis and finite element methods Biomechanical analyses of particular parts of the human skeleton, joints, and corresponding replacements A discussion of the problems of data processing from nuclear magnetic resonance imaging and computer tomography This timely book offers a wealth of information on the current research in this field. The theories presented are applied to specific problems of orthopedics. Numerical results are presented and discussed from both biomechanical and orthopedic points of view and treatment methods are also briefly addressed. Emphasis is placed on the variational approach to the investigated model problems while preserving the orthopedic nature of the investigated problems. The book also presents a study of algorithmic procedures based on these simulation models. This is a highly useful tool for designers, researchers, and manufacturers of joint implants who require the results of suggested experiments to improve existing shapes or to design new shapes. It also benefits graduate students in orthopedics, biomechanics, and applied mathematics.

This book presents the reader with comprehensive insight into various kinds of mathematical modeling and numerical computation for problems arising in several branches of engineering, such as mechanical engineering, computer science engineering, electrical engineering, electronics and communication engineering, and civil engineering. The book: • Discusses topics related to clean and green energy production and storage • Bridges the gap between core theory and costly industrial experiments • Covers advanced biomechanics and nanodrug delivery topics • Explores diversified applications of mathematical techniques to solve practical engineering problems The text in this book emphasizes mathematical treatment of soft computing, image and signal processing, fluid flows in various geometries, biomechanics, biological modeling, a mathematical description of the solar cell, analytical and numerical treatment of problems in fracture mechanics, and antenna design modeling. It also discusses the numerical computations of biomechanics problems and problems arising in cryptography. The text further covers optimization techniques that are useful for real-world problems. This material is primarily written for graduate students and academic researchers in a number of engineering fields, including electrical, electronics and communication, industrial, manufacturing, mechanical, computer science, and mathematics.

The previous edition of the International Encyclopedia of Ergonomics and Human Factors made history as the first unified source of reliable information drawn from many realms of science and technology and created specifically with ergonomics professionals in mind. It was also a winner of the Best Reference Award 2002 from the Engineering Libraries Division, American Society of Engineering Education, USA, and the Outstanding Academic Title 2002 from Choice Magazine. Not content to rest on his laurels, human factors and ergonomics expert Professor Waldemar Karwowski has overhauled his standard-setting resource, incorporating coverage of tried and true methods, fundamental principles, and major paradigm shifts in philosophy, thought, and design. Demonstrating the truly interdisciplinary nature of this field, these changes make the second edition even more comprehensive, more informative, more, in a word, encyclopedic. Keeping the format popularized by the first edition, the new edition has been completely revised and updated. Divided into 13 sections and organized alphabetically within each section, the entries provide a clear and simple outline of the topics as well as precise and practical information. The book reviews applications, tools, and innovative concepts related to ergonomic research. Technical terms are defined (where possible) within entries as well as in a glossary. Students and professionals will find this format invaluable, whether they have ergonomics, engineering, computing, or psychology backgrounds. Experts and researchers will also find it an excellent source of information on areas beyond the range of their direct interests.

This book reviews the state-of-the-art in multiscale computer modeling, in terms of both accomplishments and challenges. The information in the book is particularly useful for biomedical engineers, medical physicists and researchers in systems biology, mathematical biology, micro-biomechanics and biomaterials who are interested in how to bridge between traditional biomedical engineering work at the organ and tissue scales, and the newer arenas of cellular and molecular bioengineering.