Mem09204a Produce Basic Engineering Detail Drawings

This unit of competency covers the skills and knowledge required to identify drawing requirements, preparing engineering drawings and an engineering parts list, and issuing the drawings. Drawings include 2-D drawings to Australian Standard (AS) 1100.101-1992 Technical drawing - General principles. This unit is suitable for those working within a drafting work environment where most specifications required for the drawing are already determined. Specifications may be obtained from design information, customer requirements, sketches and preliminary layouts. Drawings will usually be carried out with the use of computer-aided design (CAD) systems but may also be done manually. Drawings are produced to AS 1100.101-1992 Technical drawing - General principles, from predetermined critical dimensions and specifications. A CD with exercise templates is available by contacting [email protected] for $10 plus postage.

This unit of competency covers producing drawings or similar graphical representations where the critical dimensions and associated tolerances and design specifications are predetermined. This unit applies to any of the full range of engineering disciplines. All work is carried out under supervision and all specifications, dimensions and tolerances are predetermined. The unit covers application of introductory drafting skills to select and apply drawing protocols. Manual drafting or computer-aided design (CAD) drawing equipment may be used. Drawings are completed to Australian Standard (AS) 1100.101-1992 Technical drawing - General principles. This unit applies to all engineering and manufacturing environments Topics include Standards & Projection, Drawing Layout, Sheets, Dimensioning, Sections, Lettering, Scales, Assembly & Detail Drawings, General & Geometric Tolerance, Surface Finish Information to be provided with drawings. Includes a Practice Competency Test

This unit of competency covers the skills and knowledge required to produce detailed engineering drawings containing fastening and locking devices. This unit is suitable for those working within a drafting work environment and can be applied across all engineering disciplines. Drawings will usually be carried out with the use of computer-aided design (CAD) systems but may also be done manually. Drawings are produced to Australian Standard (AS) 1100.101-1992 Technical drawing - General principles, from predetermined critical dimensions and specifications. A CD containing templates for exercises can be obtained by contacting [email protected] for $10 plus postage.

This unit covers producing drawings to Australian Standard 1100 or equivalent where the critical dimensions and associated tolerances for components and/or materials are selected from supplier/manufacturers' catalogues using design specifications. Manual drafting or drawing equipment is used or where a CAD (Computer Aided Design) system is used, Unit MEM09009C (Create 2D drawings using computer aided design system) and/or Unit MEM09010C (Create 3D models using computer aided design system) should also be considered. A CD containing the skill practice drawing templates can be obtained by contacting [email protected] for $10 plus postage.

This unit of competency defines the skills and knowledge required to produce drawings to AS 1100 Technical drawing or equivalent using manual drafting or drawing equipment, where the critical dimensions, associated tolerances and design specifications are predetermined. Where a computer-aided design (CAD) system is used unit MEM09009 Create 2-D drawings using computer-aided design system and MEM09010 Create 3-D models using computer-aided design system, should be selected as appropriate.

The Manual of Engineering Drawing has long been the recognised as a guide for practicing and student engineers to producing engineering drawings and annotated 3D models that comply with the latest British and ISO Standards of Technical Product Specifications and Documentation. This new edition has been updated to include the requirements of BS8888 2008 and the relevant ISO Standards, and is ideal for International readership; it includes a guide to the fundamental differences between the ISO and ASME Standards relating to Technical Product Specification and Documentation. Equally applicable to CAD and manual drawing it includes the latest development in 3D annotation and the specification of surface texture. The Duality Principle is introduced as this important concept is still very relevant in the new world of 3D Technical Product Specification. Written by members of BSI and ISO committees and a former college lecturer, the Manual of Engineering Drawing combines up to the minute technical information with clear, readable explanations and numerous diagrams and traditional geometrical construction techniques rarely taught in schools and colleges. This approach makes this manual an ideal companion for students studying vocational courses in Technical Product Specification, undergraduates studying engineering or product design and any budding engineer beginning a career in design. The comprehensive scope of this new edition encompasses topics such as orthographic and pictorial projections, dimensional, geometrical and surface tolerancing, 3D annotation and the duality principle, along with numerous examples of electrical and hydraulic diagrams with symbols and applications of cams, bearings, welding and adhesives. * The definitive guide to draughting to the latest ISO and ASME standards * An essential reference for engineers, and students, involved in design engineering and product design * Written by two ISO committee members and practising engineers.

Product specification, Technical documents, Technical drawing, Engineering drawings, Drawings

Manual of Engineering Drawing: British and International Standards, Fifth Edition, chronicles ISO and British Standards in engineering drawings, providing many examples that will help readers understand how to translate engineering specifications into a visual medium. The book includes 6 introductory chapters which provide foundational theory and contextual information regarding the broader context of engineering drawing and design. The concepts enclosed will help readers gain the most out of their drawing skills. As the standards referred to in this book change every few years, this new edition presents an important update. Covers all of the BSI and ISO standards that govern the drafting of technical product specification and standards Includes new chapters on design for additive manufacturing and computer-aided design Provides worked examples that will help readers understand how the concepts in the book are applied in practice