Metal Additive Manufacturing State Of The Art 2020

Additive Manufacturing (AM), more popularly known as 3D printing, is transforming the industry. AM of metal components with virtually no geometric limitations has enabled new product design options and opportunities, increased product performance, shorter cycle time in part production, total cost reduction, shortened lead time, improved material efficiency, more sustainable products and processes, full circularity in the economy, and new revenue streams. This Special Issue of Metals gives an up-to-date account of the state of the art in AM.

Additive Manufacturing (AM), more popularly known as 3D printing, is transforming the industry. AM of metal components with virtually no geometric limitations has enabled new product design options and opportunities, increased product performance, shorter cycle time in part production, total cost reduction, shortened lead time, improved material efficiency, more sustainable products and processes, full circularity in the economy, and new revenue streams. This Special Issue of Metals gives an up-to-date account of the state of the art in AM.

Timely summary of state-of-the-art solid-state metal 3D printing technologies, focusing on fundamental processing science and industrial applications Solid-State Metal Additive Manufacturing: Physics, Processes, Mechanical Properties, and Applications provides detailed and in-depth discussion on different solid-state metal additive manufacturing processes and applications, presenting associated methods, mechanisms and models, and unique benefits, as well as a detailed comparison to traditional fusion-based metal additive manufacturing. The text begins with a high-level overview of solid-state metal additive manufacturing with an emphasis on its position within the metal additive manufacturing spectrum and its potential for meeting specific demands in the aerospace, automotive, and defense industries. Next, each of the four categories of solid-state additive technologies—cold spray additive manufacturing, additive friction stir deposition, ultrasonic additive manufacturing, and sintering-based processes—is discussed in depth, reviewing advances in processing science, metallurgical science, and innovative applications. Finally, the future direction of these solid-state processes, especially the material innovation and artificial intelligence aspects, are discussed. Sample topics covered in Solid-State Metal Additive Manufacturing include: Physical processes and bonding mechanisms in impact-induced bonding and microstructures and microstructural evolution in cold sprayed materials Process fundamentals, dynamic microstructure evolution, and potential industrial applications of additive friction stir deposition Microstructural and mechanical characterization and industrial applications of ultrasonic additive manufacturing Principles of solid-state sintering, binder jetting-based metal printing, and sintering-based metal additive manufacturing methods for magnetic materials Critical issues inherent to melting and solidification, such as porosity, high residual stress, cast microstructure, anisotropic mechanical properties, and hot cracking Solid-State Metal Additive Manufacturing is an essential reference on the subject for academic researchers in materials science, mechanical, and biomedicine, as well as professional engineers in various manufacturing industries, especially those involved in building new additive technologies.

Science, Technology and Applications of Metal Additive Manufacturing provides a holistic picture of metal Additive Manufacturing (AM) that encompasses the science, technology and applications for the use of metal AM. Users will find design aspects, various metal AM technologies commercially available, a focus on merits and demerits, implications for qualification and certification, applications, cost modeling of AM, and future directions. This book serves as an educational guide, providing a holistic picture of metal AM that encompasses science, technology and applications for the real-life use of metal AM. Includes an overall understanding of metal additive manufacturing, Including steps involved (process flow) Discusses available commercial metal AM technologies and their relative strengths and weaknesses Reviews the process of qualification of AM parts, various applications, cost modeling, and the future directions of metal AM

Advances in Metal Additive Manufacturing explains fundamental information and the latest research on new technologies, including powder bed fusion, direct energy deposition using high energy beams, and hybrid additive and subtractive methods. This book introduces readers to the technology, provides everything needed to understand how the different stages work together, and inspires to think beyond traditional metal processing to capture new ideas in metal. Chapters offer an introduction on metal additive manufacturing, processes, and properties and standards and then present surveys on the most significant international advances in metal additive manufacturing. Throughout, the book presents a focus on the effect of important process parameters on the microstructure, mechanical properties and wear behavior of additively manufactured parts. Covers the entire process chain of metal additive manufacturing, from input data preparation to part certification Describes a wide range of the latest design tools and options, including generative design, topology optimization, and lattice and surface optimization Addresses additive manufacturing, with a comprehensive list of metals including titanium, aluminum, iron-and nickel-based alloys and Inconel 718

The introduction of metal AM processes in such industrial sectors as the aerospace, automotive, defense, jewelry, medical and tool-making fields, has led to a significant reduction in waste material and in the lead times of the components, innovative designs with higher strength, lower weight, and fewer potential failure points from joining features. This Special Issue on "Additive Manufacturing (AM) of Metallic Alloys" contains a mixture of review articles and original contributions on some problems that limit the wider uptake and exploitation of metals in AM.

This book is a comprehensive guide to the latest developments in data-driven additive manufacturing (AM). From data mining and pre-processing to signal processing, computer vision, and more, the book covers all the essential techniques for preparing AM data. Readers willl explore the key physical and synthetic sources of AM data throughout the life cycle of the process and learn about feature engineering techniques, pipelines, and resulting features, as well as their applications at each life cycle phase. With a focus on featurization efforts from reviewed literature, this book offers tabular summaries for major data sources and analyzes feature spaces at the design, process, and structure phases of AM to uncover trends and insights specific to feature engineering techniques. Finally, the book discusses current challenges and future directions, including AI/ML/DL readiness of AM data. Whether you're an expert or newcomer to the field, this book provides a broader summary of the status and future of data-driven AM technology.

Additive manufacturing (AM) of metals and composites using laser energy, direct energy deposition, electron beam methods, and wire arc melting have recently gained importance due to their advantages in fabricating the complex structure. Today, it has become possible to reliably manufacture dense parts with certain AM processes for many materials, including steels, aluminum and titanium alloys, superalloys, metal-based composites, and ceramic matrix composites. In the near future, the AM material variety will most likely grow further, with high-performance materials such as intermetallic compounds and high entropy alloys already under investigation. Additive Manufacturing Applications for Metals and Composites is a pivotal reference source that provides vital research on advancing methods and technological developments within additive manufacturing practices. Special attention is paid to the material design of additive manufacturing of parts, the choice of feedstock materials, the metallurgical behavior and synthesis principle during the manufacturing process, and the resulted microstructures and properties, as well as the relationship between these factors. While highlighting topics such as numerical modeling, intermetallic compounds, and statistical techniques, this publication is ideally designed for students, engineers, researchers, manufacturers, technologists, academicians, practitioners, scholars, and educators.