Modeling And Optimization Of Parallel And Distributed Embedded Systems

This book introduces the state-of-the-art in research in parallel and distributed embedded systems, which have been enabled by developments in silicon technology, micro-electro-mechanical systems (MEMS), wireless communications, computer networking, and digital electronics. These systems have diverse applications in domains including military and defense, medical, automotive, and unmanned autonomous vehicles. The emphasis of the book is on the modeling and optimization of emerging parallel and distributed embedded systems in relation to the three key design metrics of performance, power and dependability. Key features: Includes an embedded wireless sensor networks case study to help illustrate the modeling and optimization of distributed embedded systems. Provides an analysis of multi-core/many-core based embedded systems to explain the modeling and optimization of parallel embedded systems. Features an application metrics estimation model; Markov modeling for fault tolerance and analysis; and queueing theoretic modeling for performance evaluation. Discusses optimization approaches for distributed wireless sensor networks; high-performance and energy-efficient techniques at the architecture, middleware and software levels for parallel multicore-based embedded systems; and dynamic optimization methodologies. Highlights research challenges and future research directions. The book is primarily aimed at researchers in embedded systems; however, it will also serve as an invaluable reference to senior undergraduate and graduate students with an interest in embedded systems research.

Embedded systems are becoming one of the major driving forces in computer science. Furthermore, it is the impact of embedded information technology that dictates the pace in most engineering domains. Nearly all technical products above a certain level of complexity are not only controlled but increasingly even dominated by their embedded computer systems. Traditionally, such embedded control systems have been implemented in a monolithic, centralized way. Recently, distributed solutions are gaining increasing importance. In this approach, the control task is carried out by a number of controllers distributed over the entire system and connected by some interconnect network, like fieldbuses. Such a distributed embedded system may consist of a few controllers up to several hundred, as in today's top-range automobiles. Distribution and parallelism in embedded systems design increase the engineering challenges and require new development methods and tools. This book is the result of the International Workshop on Distributed and Parallel Embedded Systems (DIPES'98), organized by the International Federation for Information Processing (IFIP) Working Groups 10.3 (Concurrent Systems) and 10.5 (Design and Engineering of Electronic Systems). The workshop took place in October 1998 in Schloss Eringerfeld, near Paderborn, Germany, and the resulting book reflects the most recent points of view of experts from Brazil, Finland, France, Germany, Italy, Portugal, and the USA. The book is organized in six chapters: `Formalisms for Embedded System Design': IP-based system design and various approaches to multi-language formalisms. `Synthesis from Synchronous/Asynchronous Specification': Synthesis techniques based on Message Sequence Charts (MSC), StateCharts, and Predicate/Transition Nets. `Partitioning and Load-Balancing': Application in simulation models and target systems. `Verification and Validation': Formal techniques for precise verification and more pragmatic approaches to validation. `Design Environments' for distributed embedded systems and their impact on the industrial state of the art. `Object Oriented Approaches': Impact of OO-techniques on distributed embedded systems. £/LIST£ This volume will be essential reading for computer science researchers and application developers.

This year, the IFIP Working Conference on Distributed and Parallel Embedded Sys tems (DIPES 2008) is held as part of the IFIP World Computer Congress, held in Milan on September 7 10, 2008. The embedded systems world has a great deal of experience with parallel and distributed computing. Many embedded computing systems require the high performance that can be delivered by parallel computing. Parallel and distributed computing are often the only ways to deliver adequate real time performance at low power levels. This year’s conference attracted 30 submissions, of which 21 were accepted. Prof. Jor ̈ g Henkel of the University of Karlsruhe graciously contributed a keynote address on embedded computing and reliability. We would like to thank all of the program committee members for their diligence. Wayne Wolf, Bernd Kleinjohann, and Lisa Kleinjohann Acknowledgements We would like to thank all people involved in the organization of the IFIP World Computer Congress 2008, especially the IPC Co Chairs Judith Bishop and Ivo De Lotto, the Organization Chair Giulio Occhini, as well as the Publications Chair John Impagliazzo. Further thanks go to the authors for their valuable contributions to DIPES 2008. Last but not least we would like to acknowledge the considerable amount of work and enthusiasm spent by our colleague Claudius Stern in preparing theproceedingsofDIPES2008. Hemadeitpossibletoproducethemintheircurrent professional and homogeneous style.

From Model-Driven Design to Resource Management for Distributed Embedded Systems presents 16 original contributions and 12 invited papers presented at the Working Conference on Distributed and Parallel Embedded Systems - DIPES 2006, sponsored by the International Federation for Information Processing - IFIP. Coverage includes model-driven design, testing and evolution of embedded systems, timing analysis and predictability, scheduling, allocation, communication and resource management in distributed real-time systems.

This book outlines a methodology for the use of parallel processing in real time systems. It provides an introduction to parallel processing in general, and to embedded systems in particular. Among the embedded systems are processors in such applications as automobiles, various machinery, IPGAs (field programmable gate arrays), multimedia embedded systems such as those used in the computer game industry, and more. * Presents design and simulation tools as well as case studies. * First presentation of this material in book form.

This book offers readers broad coverage of techniques to model, verify and validate the behavior and performance of complex distributed embedded systems. The authors attempt to bridge the gap between the three disciplines of model-based design, real-time analysis and model-driven development, for a better understanding of the ways in which new development flows can be constructed, going from system-level modeling to the correct and predictable generation of a distributed implementation, leveraging current and future research results.

Due to the decreasing production costs of IT systems, applications that had to be realised as expensive PCBs formerly, can now be realised as a system-on-chip. Furthermore, low cost broadband communication media for wide area communication as well as for the realisation of local distributed systems are available. Typically the market requires IT systems that realise a set of specific features for the end user in a given environment, so called embedded systems. Some examples for such embedded systems are control systems in cars, airplanes, houses or plants, information and communication devices like digital TV, mobile phones or autonomous systems like service- or edutainment robots. For the design of embedded systems the designer has to tackle three major aspects: The application itself including the man-machine interface, The (target) architecture of the system including all functional and non-functional constraints and, the design methodology including modelling, specification, synthesis, test and validation. The last two points are a major focus of this book. This book documents the high quality approaches and results that were presented at the International Workshop on Distributed and Parallel Embedded Systems (DIPES 2000), which was sponsored by the International Federation for Information Processing (IFIP), and organised by IFIP working groups WG10.3, WG10.4 and WG10.5. The workshop took place on October 18-19, 2000, in Schloß Eringerfeld near Paderborn, Germany. Architecture and Design of Distributed Embedded Systems is organised similar to the workshop. Chapters 1 and 4 (Methodology I and II) deal with different modelling and specification paradigms and the corresponding design methodologies. Generic system architectures for different classes of embedded systems are presented in Chapter 2. In Chapter 3 several design environments for the support of specific design methodologies are presented. Problems concerning test and validation are discussed in Chapter 5. The last two chapters include distribution and communication aspects (Chapter 6) and synthesis techniques for embedded systems (Chapter 7). This book is essential reading for computer science researchers and application developers.

Ranging from low-level application and architecture optimizations to high-level modeling and exploration concerns, this authoritative reference compiles essential research on various levels of abstraction appearing in embedded systems and software design. It promotes platform-based design for improved system implementation and modeling and enhanced performance and cost analyses. Domain-Specific Processors relies upon notions of concurrency and parallelism to satisfy performance and cost constraints resulting from increasingly complex applications and architectures and addresses concepts in specification, simulation, and verification in embedded systems and software design.