Modern Anti Windup Synthesis

This book provides a wide variety of state-space--based numerical algorithms for the synthesis of feedback algorithms for linear systems with input saturation. Specifically, it addresses and solves the anti-windup problem, presenting the objectives and terminology of the problem, the mathematical tools behind anti-windup algorithms, and more than twenty algorithms for anti-windup synthesis, illustrated with examples. Luca Zaccarian and Andrew Teel's modern method--combining a state-space approach with algorithms generated by solving linear matrix inequalities--treats MIMO and SISO systems with equal ease. The book, aimed at control engineers as well as graduate students, ranges from very simple anti-windup construction to sophisticated anti-windup algorithms for nonlinear systems. Describes the fundamental objectives and principles behind anti-windup synthesis for control systems with actuator saturation Takes a modern, state-space approach to synthesis that applies to both SISO and MIMO systems Presents algorithms as linear matrix inequalities that can be readily solved with widely available software Explains mathematical concepts that motivate synthesis algorithms Uses nonlinear performance curves to quantify performance relative to disturbances of varying magnitudes Includes anti-windup algorithms for a class of Euler-Lagrange nonlinear systems Traces the history of anti-windup research through an extensive annotated bibliography

This is the first book to focus on the use of nonlinear analysis and synthesis techniques for aircraft control. It is also the first book to address in detail closed-loop control problems for aircraft "on-ground" – i.e. speed and directional control of aircraft before take-off and after touch down. The book will be of interest to engineers, researchers, and students in control engineering, and especially aircraft control.

This volume presents a selection of advanced case studies that address a substantial range of issues and challenges arising in space engineering. The contributing authors are well-recognized researchers and practitioners in space engineering and in applied optimization. The key mathematical modeling and numerical solution aspects of each application case study are presented in sufficient detail. Classic and more recent space engineering problems – including cargo accommodation and object placement, flight control of satellites, integrated design and trajectory optimization, interplanetary transfers with deep space manoeuvres, low energy transfers, magnetic cleanliness modeling, propulsion system design, sensor system placement, systems engineering, space traffic logistics, and trajectory optimization – are discussed. Novel points of view related to computational global optimization and optimal control, and to multidisciplinary design optimization are also given proper emphasis. A particular attention is paid also to scenarios expected in the context of future interplanetary explorations. Modeling and Optimization in Space Engineering will benefit researchers and practitioners working on space engineering applications. Academics, graduate and post-graduate students in the fields of aerospace and other engineering, applied mathematics, operations research and optimal control will also find the book useful, since it discusses a range of advanced model development and solution techniques and tools in the context of real-world applications and new challenges.

This brief presents methods for anti-windup control in the presence of saturating sensors, arbitrary external reference inputs, and constant or step-like disturbance inputs. It also offers techniques to assure windup prevention when both the input and the output signals are limited and this for systems with one input (SISO) and multiple inputs (MIMO). The emphasis in both is on real-world practicality rather than rigorously proven stability. Two novel solutions for anti-windup control are explored. The first approach, for SISO systems only, follows the classic design paradigm of anti-windup control: design an arbitrary linear compensator and add appropriate measures for their prevention if saturation causes stability problems. This uses a saturation indicator detecting the presence, but not the extent of saturation. The second methodology uses a compensator design that assures the desired rejection of persistent disturbances without jeopardizing closed-loop stability, and can be applied to SISO and MIMO systems alike. Containing worked examples that can be reproduced by the reader, illustrative simulations, and open problems for future research, Windup in Control Owing to Sensor Saturation will be of interest to both academics and engineers in the fields of control and process industries.

This book presents a selection of advanced case studies that cover a substantial range of issues and real-world challenges and applications in space engineering. Vital mathematical modeling, optimization methodologies and numerical solution aspects of each application case study are presented in detail, with discussions of a range of advanced model development and solution techniques and tools. Space engineering challenges are discussed in the following contexts: •Advanced Space Vehicle Design •Computation of Optimal Low Thrust Transfers •Indirect Optimization of Spacecraft Trajectories •Resource-Constrained Scheduling, •Packing Problems in Space •Design of Complex Interplanetary Trajectories •Satellite Constellation Image Acquisition •Re-entry Test Vehicle Configuration Selection •Collision Risk Assessment on Perturbed Orbits •Optimal Robust Design of Hybrid Rocket Engines •Nonlinear Regression Analysis in Space Engineering •Regression-Based Sensitivity Analysis and Robust Design •Low-Thrust Multi-Revolution Orbit Transfers •Modeling and Optimization of Balance Layout Problems •Pilot-Induced Oscillations Alleviation •Modeling and Optimization of Hybrid Transfers to Near-Earth Objects •Probabilistic Safety Analysis of the Collision Between Space Debris and Satellite •Flatness-based Low-thrust Trajectory Optimization for Spacecraft Proximity Operations The contributing authors are expert researchers and practitioners in either the space engineering and/or in the applied optimization fields. Researchers and practitioners working in various applied aspects of space engineering will find this book practical and informative. Academics, graduate and post-graduate students in aerospace engineering, applied mathematics, operations research, optimization, and optimal control, will find this book useful.

Physical, safety and technological constraints suggest that control actuators can neither provide unlimited amplitude signals nor unlimited speed of reaction. The techniques described in this book are useful for industrial applications in aeronautical or space domains, and in the context of biological systems. Such methods are well suited for the development of tools that help engineers to solve analysis and synthesis problems of control systems with input and output constraints.

This monograph details basic concepts and tools fundamental for the analysis and synthesis of linear systems subject to actuator saturation and developments in recent research. The authors use a state-space approach and focus on stability analysis and the synthesis of stabilizing control laws in both local and global contexts. Different methods of modeling the saturation and behavior of the nonlinear closed-loop system are given special attention. Various kinds of Lyapunov functions are considered to present different stability conditions. Results arising from uncertain systems and treating performance in the presence of saturation are given. The text proposes methods and algorithms, based on the use of linear programming and linear matrix inequalities, for computing estimates of the basin of attraction and for designing control systems accounting for the control bounds and the possibility of saturation. They can be easily implemented with mathematical software packages.

This monograph presents design methodologies for (robust) fractional control systems. It shows the reader how to take advantage of the superior flexibility of fractional control systems compared with integer-order systems in achieving more challenging control requirements. There is a high degree of current interest in fractional systems and fractional control arising from both academia and industry and readers from both milieux are catered to in the text. Different design approaches having in common a trade-off between robustness and performance of the control system are considered explicitly. The text generalizes methodologies, techniques and theoretical results that have been successfully applied in classical (integer) control to the fractional case. The first part of Advances in Robust Fractional Control is the more industrially oriented. It focuses on the design of fractional controllers for integer processes. In particular, it considers fractional-order proportional-integral-derivative controllers, because integer-order PID regulators are, undoubtedly, the controllers most frequently adopted in industry. The second part of the book deals with a more general approach to fractional control systems, extending techniques (such as H-infinity optimal control and optimal input‒output inversion based control) originally devised for classical integer-order control. Advances in Robust Fractional Control will be a useful reference for the large number of academic researchers in fractional control, for their industrial counterparts and for graduate students who want to learn more about this subject.