Modern Well Test Analysis

This book on well test analysis, and the use of advanced interpretation models is volume 3 in the series Handbook of Petroleum Exploration and Production. The chapters in the book are: Principles of Transient Testing, Analysis Methods, Wellbore Conditions, Effect of Reservoir Heterogeneities on Well Responses, Effect of Reservoir Boundaries on Well Responses, Multiple Well Testing, Application to Gas Reservoirs, Application to Multiphase Reservoirs, Special Tests, Practical Aspects of Well Test Interpretation.

Geothermal Well Test Analysis: Fundamentals, Applications and Advanced Techniques provides a comprehensive review of the geothermal pressure transient analysis methodology and its similarities and differences with petroleum and groundwater well test analysis. Also discussed are the different tests undertaken in geothermal wells during completion testing, output/production testing, and the interpretation of data. In addition, the book focuses on pressure transient analysis by numerical simulation and inverse methods, also covering the familiar pressure derivative plot. Finally, non-standard geothermal pressure transient behaviors are analyzed and interpreted by numerical techniques for cases beyond the limit of existing analytical techniques. Provides a guide on the analysis of well test data in geothermal wells, including pressure transient analysis, completion testing and output testing Presents practical information on how to avoid common issues with data collection in geothermal wells Uses SI units, converting existing equations and models found in literature to this unit system instead of oilfield units

For engineers in the petroleum industry using test wells to evaluate the economic feasibility of drilling a production well into a particular reservoir. Details the mathematics and interpretations of a number of testing methods drawdown, pressure buildup, multirate flow, and wellbore effects; review

Data accumulation, analysis, and interpretation technology are critical in hydrocarbon exploration and extraction to maximize petroleum recovery and development. Dynamic Well Testing in Petroleum Exploration and Development presents modern petroleum exploration and well testing interpretation methods, emphasizing their application and development under special geological and development conditions in oil and gas fields. More than 100 case studies and 250 illustrations—many in full color—aid in the retention of key concepts. Extensive analysis of pressure data acquired from well testing through advanced interpretation software can be tailored to specific reservoir environments. This timely, state-of-the-art reference will be of particular interest to petroleum geoscientists and engineers working for oil and gas companies worldwide. Includes graphs that can be used as templates to accurately plot hydrocarbon reservoir data accumulation, analysis, and interpretation Field-practical case studies break information down into real-world examples which can be put into practice—not found in other books on well testing Illustrations—many in full color—help you retain key concepts

Well Test Analysis for Multilayered Reservoirs with Formation Crossflow introduces the fundamentals of well test analysis of a multilayered reservoir with formation crossflow. The effects of reservoir parameters on wellbore pressure and flow rate are examined, as is a proper method that has been established to analyze well test data that leads to better determinations on the reservoir parameters for each layer of the reservoir. Focusing on multilayer models for data analysis, this reference explains the reasons for the existence of single-phase crossflow in multilayer reservoirs, exploring methods to establish them and presenting practical applications to utilize and implement for today’s more complex reservoirs. Aiding in better well testing operations and models, this book is a one-stop solution for today’s reservoir and production engineer, helping them understand every layer of their reservoir. Includes real-world examples of well testing through multilayered reservoirs, whether with crossflow or with formation crossflow Provides strong guidance and criteria of research on reservoir dynamic performance, such as physical models and mathematical models Includes a new unsteady crossflow model for vertical interference testing in low-permeability zones Describes interpretation methods for different cases in multilayer reservoirs, including a new model called semipermeable walls for stratified reservoirs, drawdown test procedures and layer-by-layer test procedures that are useful for shales between layers

The conventional and modern well test interpretation methods are an important tool in the petroleum engineer’s toolkit. Used in the exploration and discovery phase of a field, they are performed to determine the quality of a well or to permit estimation of producing rates at different producing pressures. However once a field enters the middle and later development phase, the reservoir flow environment grows increasingly complex and conventional or modern methods do not satisfy the needs of old field development and evaluation. Based on over 10 years of field and research experience, Streamline Numerical Well Test Interpretation Theory and Method provides an effective method for the determination of residual oil distribution for the middle and mature phases of a field. One of the most advanced books available, the author explains the development history of well test theory, analyzes the limitation of modern well test interpretation method, and proposes the concept and framework of numerical well test. This is quickly followed by an introduction of basic principles and solution procedures of streamline numerical simulation theory and method. The book then systematically applies streamline numerical well test interpretation models to a multitude of reservoir types, ranging from single layer reservoir to multi-layer reservoirs. The book presents multi-parameter streamline numerical well test automatic match interpretation method based on double-population genetic algorithm, which lays the foundation to fast automatic match of numerical well test. The book introduces streamline numerical well test interpretation software with independent intellectual property right which is programmed based on the above theoretical studies. Single and muti-layer sandstone water flooding reservoirs Multi-layer sandstone chemical flooding model and components Explains the application of streamline numerical well test and software Applies programmed software to 177 wells Quickly calculate the distribution of pressure, saturation and streamline Covers all kinds of numerical well test interpretation models Avoid the disadvantages of conventional well test and numerical well test interpretation method Complete tutorial on streamline numerical well test interpretation software

Pressure Transient Testing presents the fundamentals of pressure-transient test analysis and design in clear, simple language and explains the theoretical bases of commercial well-test-analysis software. Test-analysis techniques are illustrated with complete and clearly written examples. Additional exercises for classroom or individual practice are provided. With its focus on physical processes and mathematical interpretation, this book appeals to all levels of engineers who want to understand how modern approaches work. Pressure transient test analysis is a mature technology in petroleum engineering; even so, it continues to evolve. Because of the developments in this technology since the last SPE textbook devoted to transient testing was published, we concluded that students could benefit from a textbook approach to the subject that includes a representative sampling of the more important fundamentals and applications. We deliberately distinguish between a textbook approach, which stresses understanding through numerous examples and exercises dealing with selected fundamentals and applications, and a monograph approach, which attempts to summarize the state-of-the-art in the technology. Computational methods that transient test analysts use have gone through a revolution since most existing texts on the subject were written. Most calculations are now done with commercial software or by spreadsheets or proprietary software developed by users to meet personal needs and objectives. These advances in software have greatly increased productivity in this technology, but they also have contributed to a "black box" approach to test analysis. In this text, we attempt to explain what's in the box, and we do not include a number of the modern tools that enhance individual engineer productivity. We hope, instead, to provide understanding so that the student can use the commercial software with greater appreciation and so that the student can read monographs and papers on transient testing with greater appreciation for the context of the subject. Accordingly, this text is but an introduction to the vast field of pressure transient test analysis.