Multiphase Flow In Polymer Processing

Multiphase Flow in Polymer Processing focuses on dispersed and stratified multiphase flow in polymer processing. This book explores the rheological behavior of multiphase (or multicomponent) polymeric systems as they are involved in various fabrication operations. It also outlines the importance of the morphological states of multiphase polymeric systems to explain the systems, rheological behavior in the fluid state, and mechanical behavior in the solid state. This monograph consists of eight chapters divided into two parts. After discussing dispersed and stratified multiphase flow in polymer processing, it introduces the reader to the fundamentals of rheology. The following chapters focus on the rheological behavior of particulate-filled polymeric systems and heterogeneous polymeric systems; the phenomenon of droplet breakup in dispersed flow; and gas-charged polymeric systems. The role of the discrete phase (that is, solid particles, liquid droplets, gas bubbles) in determining the bulk rheological properties of the multiphase system is highlighted, along with some representative polymer processing operations (namely, fiber spinning and injection molding) of the multiphase (or multicomponent) polymeric systems. Coextrusion in cylindrical, rectangular, and annular dies is also considered. The final chapter is devoted to the phenomenon of interfacial instability in coextrusion. This text will be a useful resource for chemists, chemical engineers, and those in the polymer processing industry.

Experts in rheology and polymer processing present up-to-date, fundamental and applied information on the rheological properties of polymers, in particular those relevant to processing, contributing to the physical understanding and the mathematical modelling of polymer processing sequences. Basic concepts of non-Newtonian fluid mechanics, micro-rheological modelling and constitutive modelling are reviewed, and rheological measurements are described. Topics with practical relevance are debated, such as linear viscoelasticity, converging and diverging flows, and the rheology of multiphase systems. Approximation methods are discussed for the computer modelling of polymer melt flow. Subsequently, polymer processing technologies are studied from both simulation and engineering perspectives. Mixing, crystallization and reactive processing aspects are also included. Audience: An integrated and complete view of polymer processing and rheology, important to institutions and individuals engaged in the characterisation, testing, compounding, modification and processing of polymeric materials. Can also support academic polymer processing engineering programs.

Thoroughly revised edition of the classic text on polymer processing The Second Edition brings the classic text on polymer processing thoroughly up to date with the latest fundamental developments in polymer processing, while retaining the critically acclaimed approach of the First Edition. Readers are provided with the complete panorama of polymer processing, starting with fundamental concepts through the latest current industry practices and future directions. All the chapters have been revised and updated, and four new chapters have been added to introduce the latest developments. Readers familiar with the First Edition will discover a host of new material, including: * Blend and alloy microstructuring * Twin screw-based melting and chaotic mixing mechanisms * Reactive processing * Devolatilization--theory, mechanisms, and industrial practice * Compounding--theory and industrial practice * The increasingly important role of computational fluid mechanics * A systematic approach to machine configuration design The Second Edition expands on the unique approach that distinguishes it from comparative texts. Rather than focus on specific processing methods, the authors assert that polymers have a similar experience in any processing machine and that these experiences can be described by a set of elementary processing steps that prepare the polymer for any of the shaping methods. On the other hand, the authors do emphasize the unique features of particular polymer processing methods and machines, including the particular elementary step and shaping mechanisms and geometrical solutions. Replete with problem sets and a solutions manual for instructors, this textbook is recommended for undergraduate and graduate students in chemical engineering and polymer and materials engineering and science. It will also prove invaluable for industry professionals as a fundamental polymer processing analysis and synthesis reference.

Today, fiber reinforced composites are in use • properties of different component (fiber, in a variety of structures, ranging from space matrix, filler) materials; craft and aircraft to buildings and bridges. • manufacturing techniques; This wide use of composites has been facili • analysis and design; tated by the introduction of new materials, • testing; improvements in manufacturing processes • mechanically fastened and bonded joints; and developments of new analytical and test • repair; ing methods. Unfortunately, information on • damage tolerance; these topics is scattered in journal articles, in • environmental effects; conference and symposium proceedings, in and disposal; • health, safety, reuse, workshop notes, and in government and com • applications in: pany reports. This proliferation of the source - aircraft and spacecraft; material, coupled with the fact that some of - land transportation; the relevant publications are hard to find or - marine environments; are restricted, makes it difficult to identify and - biotechnology; obtain the up-to-date knowledge needed to - construction and infrastructure; utilize composites to their full advantage. - sporting goods. This book intends to overcome these diffi Each chapter, written by a recognized expert, culties by presenting, in a single volume, is self-contained, and contains many of the many of the recent advances in the field of 'state-of-the-art' techniques reqUired for prac composite materials. The main focus of this tical applications of composites.

This volume of the Advances in Engineering Fluid Mechanics Series covers topics in hydrodynamics related to polymerization of elastomers and plastics. Emphasis is given to advanced concepts in multiphase reactor systems often used in the manufacturing of products. This volume is comprised of 30 chapters that address key subject areas such as multiphase mixing concepts, multicomponet reactors and the hydrodynamics associated with their operations, and slurry flow behavior associated with non-Newtonian flows.

At the VIIth International Congress on Rheology, which was held in Goteborg in 1976, Proceedings were for the first time printed in advance and distributed to all participants at the time of the Congress. Although of course we Italians would be foolish to even try to emulate our Swedish friends as far as efficiency of organization is concerned, we decided at the very beginning that, as far as the Proceedings were concerned, the VIIIth International Congress on Rheology in Naples would follow the standards of time liness set by the Swedish Society of Rheology. This book is the result we have obtained. We wish to acknowledge the cooperation of Plenum Press in producing it within the very tight time schedule available. Every four years, the International Congress on Rheology represents the focal point where all rheologists meet, and the state of the art is brought up to date for everybody interested; the Proceedings represent the written record of these milestones of scientific progress in rheology. We have tried to make use of the traditions of having invited lectures, and of leaving to the organizing committee the freedom to choose the lecturers as they see fit, in order to collect a group of invited lectures which gives as broad as possible a landscape of the state of the art in every relevant area of rheology. The seventeen invited lectures are collected in the first volume of the proceedings.

P. S. HOPE and M. J. FOLKES Mixing two or more polymers together to produce blends or alloys is a well-established strategy for achieving a specified portfolio of physical proper ties, without the need to synthesise specialised polymer systems. The subject is vast and has been the focus of much work, both theoretical and experimental. Much ofthe earlier work in this field was necessarily empirical and many ofthe blends produced were of academic rather than commercial interest. The manner in which two (or more) polymers are compounded together is of vital importance in controlling the properties of blends. Moreover, particular ly through detailed rheological studies, it is becoming apparent that process ing can provide a wide range of blend microstructures. In an extreme, this is exemplified by the in situ formation of fibres resulting from the imposition of predetermined flow fields on blends, when in the solution or melt state. The microstructures produced in this case transform the blend into a true fibre composite; this parallels earlier work on the deformation of metal alloys. This type of processing-structure-property correlation opens up many new possi bilities for innovative applications; for example, the production of stiff fibre composites and blends having anisotropic transport properties, such as novel membranes. This book serves a dual purpose.