Offshore Well Completion And Stimulation

While the public is generally aware of the use of hydraulic fracturing for unconventional resource development onshore, it is less familiar with the well completion and stimulation technologies used in offshore operations, including hydraulic fracturing, gravel packs, "fracpacks," and acid stimulation. Just as onshore technologies have improved, these well completion and stimulation technologies for offshore hydrocarbon resource development have progressed over many decades. To increase public understanding of these technologies, the National Academies of Sciences, Engineering, and Medicine established a planning committee to organize and convene a workshop on Offshore Well Completion and Stimulation: Using Hydraulic Fracturing and Other Technologies on October 2-3, 2017, in Washington, DC. This workshop examined the unique features about operating in the U.S. offshore environment, including well completion and stimulation technologies, environmental considerations and concerns, and health and safety management. Participants from across government, industry, academia, and nonprofit sectors shared their perspectives on operational and regulatory approaches to mitigating risks to the environment and to humans in the development of offshore resources. This publication summarizes the presentations and discussions from the workshop.

Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. * Course book based on course well completion design by TRACS International * Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world. * Full colour

Well Control for Completions and Interventions explores the standards that ensure safe and efficient production flow, well integrity and well control for oil rigs, focusing on the post-Macondo environment where tighter regulations and new standards are in place worldwide. Too many training facilities currently focus only on the drilling side of the well’s cycle when teaching well control, hence the need for this informative guide on the topic. This long-awaited manual for engineers and managers involved in the well completion and intervention side of a well’s life covers the fundamentals of design, equipment and completion fluids. In addition, the book covers more important and distinguishing components, such as well barriers and integrity envelopes, well kill methods specific to well completion, and other forms of operations that involve completion, like pumping and stimulation (including hydraulic fracturing and shale), coiled tubing, wireline, and subsea intervention. Provides a training guide focused on well completion and intervention Includes coverage of subsea and fracturing operations Presents proper well kill procedures Allows readers to quickly get up-to-speed on today’s regulations post-Macondo for well integrity, barrier management and other critical operation components

Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. Matchless in-depth technical advice for achieving operational excellence with advance solutions.

The latest oil and gas well completion technologies and best practices Increase oil and gas production and maximize revenue generation using the start-to-finish completion procedures contained in this hands-on guide. Written by a pair of energy production experts, Modern Completion Technology for Oil and Gas Wells introduces each technique, shows how it works, and teaches how to deploy it effectively. You will get full explanations of the goals of completion along with detailed examples and case studies that clearly demonstrate how to successfully meet those goals. Modern production methods such as hydraulic fracturing, acid simulation, and intelligent well completions are thoroughly covered. Coverage includes: •Functions and goals of oil and gas well completion •Well completion fundamentals •Completion impact in near-wellbore region to inflow performance •Completions for fracturing •Completions for acid stimulation •Intelligent well completion: downhole monitoring and flow control •Completion designs for production and injection optimization