Planning And Design Handbook On Precast Building Structures

In 1994 fib Commission 6: Prefabrication edited a successful Planning and Design Handbook that ran to approximately 45,000 copies and was published in Spanish and German. Nearly 20 years later Bulletin 74 brings that first publication up to date. It offers a synthesis of the latest structural design knowledge about precast building structures against the background of 21st century technological innovations in materials, production and construction. With it, we hope to help architects and engineers achieve a full understanding of precast concrete building structures, the possibilities they offer and their specific design philosophy. It was principally written for non-seismic structures. The handbook contains eleven chapters, each dealing with a specific aspect of precast building structures. The first chapter of the handbook highlights best practice opportunities that will enable architects, design engineers and contractors to work together towards finding efficient solutions, which is something unique to precast concrete buildings. The second chapter offers basic design recommendations that take into account the possibilities, restrictions and advantages of precast concrete, along with its detailing, manufacture, transport, erection and serviceability stages. Chapter three describes the precast solutions for the most common types of buildings such as offices, sports stadiums, residential buildings, hotels, industrial warehouses and car parks. Different application possibilities are explored to teach us which types of precast units are commonly used in all those situations. Chapter four covers the basic design principles and systems related to stability. Precast concrete structures should be designed according to a specific stability concept, unlike cast in-situ structures. Chapter five discusses structural connections. Chapters six to nine address the four most commonly used systems or subsystems of precast concrete in buildings, namely, portal and skeletal structures, wall-frame structures, floor and roof structures and architectural concrete facades. In chapter ten the design and detailing of a number of specific construction details in precast elements are discussed, for example, supports, corbels, openings and cutouts in the units, special features related to the detailing of the reinforcement, and so forth. Chapter eleven gives guidelines for the fire design of precast concrete structures. The handbook concludes with a list of references to good literature on precast concrete construction.

This new edition of John Illingworth's popular book provides a thorough introduction to the selection of construction methods, their planning and organization on site. Thoroughly revised and updated, Construction Methods and Planning takes a practical, down-to-earth approach and features numerous examples and illustrations taken from real situations and sites. In Part One, the main factors which determine the planning of construction methods - site inspections, the site itself, temporary works, design, cost concepts and selection of plant and methods - are discussed. In Part Two, the application of these tools is presented, covering foundations and basements, in situ and precast concrete structures, steel frames, cladding, internal and external works, waste, methods statements, contract planning control and claims. The author provides an extension of the concept of 'buildability' and new chapters on facade retention and the refurbishment of domestic accommodation.

This guide to precast prestressed concrete (PSC) introduces and applies principles for the design of PSC slabs, thermal slabs, beam and block flooring and main beams, including (where appropriate) cantilevers, and composite and continuous construction. The book provides numerous worked examples for a wide range of PSC elements and covers the innovative use of PSC on several projects in the UK over the past ten years, drawing on the authors' first-hand experience in the design and manufacture of special products. The contents are in line with latest revisions of the Eurocodes and European Product Standards. Precast Prestressed Concrete for Building Structures is ideal for consulting structural engineers, clients, PSC manufacturers, and advanced undergraduate and graduate students, both as a guide and a textbook.

This handbook addresses problems facing the engineer when preparing to build, both during the contract bidding phase and after a contract has been concluded. It offers clear guidelines for planning the resources and machinery on site, as well as the safe positioning of roads, cranes, storage and temporary buildings. Site planning activities are presented here in logical sequence, offering an efficient and safe design of the construction site and of the temporary works. The book describes the process of engineering preparation of on-site construction works in all phases of the construction life-cycle, from the design phase - preparing the financial plan and procurement scheme for the owner before tendering the contract; the tendering phase; and after bid completion. A list of procedures is presented for planning the construction site in order to simplify the engineer’s work of site and temporary works planning. The Engineer’s Manual of Construction Site Planning is for all those involved in the planning of construction sites, construction managers, construction engineers and quantity surveyors, as well as for students in civil engineering and construction.

This document has a broad scope and is not focussed on design issues. Precast construction under seismic conditions is treated as a whole. The main principles of seismic design of different structural systems, their behavior and their construction techniques are presented through rules, construction steps and sequences, procedures, and details that should lead to precast structures built in seismic areas complying with the fundamental performance requirements of collapse prevention and life safety in major earthquakes and limited damage in more frequent earthquakes. The content of this document is largely limited to conventional precast construction and, although some information is provided on the well-known “PRESSS technology” (jointed ductile dry connections), this latter solution is not treated in detail in this document. The general overview, contained in this document, of alternative structural systems and connection solutions available to achieve desired performance levels, intends to provide engineers, architects, clients, and end-users (in general) with a better appreciation of the wide range of applications that modern precast concrete technology can have in various types of construction from industrial to commercial as well as residential. Lastly, the emphasis on practical aspects, from conceptual design to connection detailing, aims to help engineers to move away from the habit of blindly following prescriptive codes in their design, but instead go back to basic principles, in order to achieve a more robust understanding, and thus control, of the seismic behaviour of the structural system as a whole, as well as of its components and individual connections.

The aim of this state-of-art report is to present current practices for use of precast and prestressed concrete in countries in seismic regions, to recommend good practice, and to discuss current developments. The report has been drafted by 30 contributors from nine different countries. This state-of-art report covers: state of the practice in various countries; advantages and disadvantages of incorporating precast reinforced and prestressed concrete in construction; lessons learned from previous earthquakes; construction concepts; design approaches; primary lateral load resisting systems (precast and prestressed concrete frame systems and structural walls including dual systems) diaphragms of precast and prestressed concrete floor units; modelling and analytical methods; gravity load resisting systems; foundations; and miscellaneous elements (shells, folded plates, stairs and architectural cladding panels). Design equations are reported where necessary, but the emphasis is on principles. Ordinary cast-in-place reinforced concrete is not considered in this report. This fib state-of-the-art report is intended to assist designers and constructors to provide safe and economical applications of structural precast concrete and at the same time to allow innovation in design and construction to continue. This Bulletin N° 27 was approved as an fib state-of-art report in autumn 2002 byfib Commission 7, Seismic design.

Sustainability is a crucial concept. Sustainability was first introduced in the fib by creating a Special Activity Group under the convenorship of Prof Sakai. This group encouraged and helped all fib commissions to create their own groups dealing with sustainability. The fib Commission 6 “Prefabrication” took up this challenge and created a Task Group called “Sustainability of Structures with Precast Elements” in 2012. The group was created as a joint group with PCI (Precast Concrete Institute of USA), with the then-active fib Commission 3 “Environmental aspects of design and construction”, and the fib’s SAG8 on Sustainability. Therefore, this Bulletin 88 is a joint publication between PCI and fib. The aim of the work was to gather and study the most recent work that has been developed regarding sustainability – and more particularly Life Cycle Assessment - of structures in which precast elements are used. The final aim of the group would be to provide recommendations for the study and assessment of structures built with precast elements. It will cover all aspects of this kind of structure, from planning, design, execution, use, maintenance and remedial activities to deconstruction, reuse, demolition and recycling. The fib holds sustainability as a high priority, which triggered the creation of a new Commission 7 “Sustainability” during the 2015 fib commissions reorganisation. This commission has been chaired since then by Prof Hájek. Sustainability concepts were already introduced in the Model Code 2010 and are a key part in the elaboration of the Model Code 2020. Experts from many parts of the world contributed to this fib Bulletin 88 which gives the document a broad overview of sustainability sensibilities across different continents. Bulletin 88 starts with a description of the importance of environmental concepts and developments in the world today and the reason why sustainability is a crucial concept that will be even more important in the future. The document then focuses on the different advances of standards and regulations that have been developed or are in the process of being implemented. ISO, European regulations, North American regulations, Brazilian implementation in real precast companies and the developments of the fib Model Codes have been considered in this bulletin. After that, the bulletin examines life cycle aspects of precast structures, taking former fib bulletins as a basis. Then, it moves on to an in-depth study of specific sustainability aspects of precast structures. Then, the bulletin deals with the special methodologies and tools that are available around the world to handle sustainability in general and with precast structures in particular. A selection of tools is described in this chapter. The Task Group also developed proposals about how to deal with the sustainability of precast structures. Some of the proposals are described conceptually in the text. The final chapter compiles several case studies or examples of sustainability applications of precast structures. The examples differ and are grouped by category: buildings, infrastructure and special works.v The task group continues to work on developing other documents that will focus on the detailed practical application of some of the sustainability models described in this document.