Principles Of Metal Surface Treatment And Protection

Principles of Metal Surface Treatment and Protection deals with the principles of metal surface treatment and protection. Topics covered range from electrodeposition and hot dip coating to diffusion and non-metallic coatings, as well as oxide and conversion coatings. The theory of corrosion protection is also discussed. Comprised of eight chapters, this volume begins with an overview of the corrosion of metals and the scope of protection against corrosion, followed by a detailed treatment of electrodeposition. The discussion then turns to the principles of hot dipping as a coating method; the formation of a diffusion coating; and the role of a non-metallic coating in corrosion protection. Subsequent chapters focus on the protection of oxide films against corrosion by means of anodizing, phosphatizing, and the use of tin free steel; testing and selection of a particular coating for corrosion resistance applications; and the theory of corrosion protection. This book is intended for metal-finishing scientists and students of metallurgy and metal finishing.

Arranged to give prominence to the nature and properties of surfaces rather than to process methods. Describes 76 coatings and surface treatments, including acrylic polymers, cobalt and alloys of it, sprayed or slurry-applied chromium oxide, nitrocarburising of steel and cast iron, oil and oleoresinous paints, silver, thermal hardening and vapor deposited ceramic compounds. Then considers coating and treatment methods, such as cladding, electrophoretic deposition, metal powder coating with organic and inorganic binders, and weld surfacing. A final section presents a guide to coating and treatment characteristics, among the smoothness, solderability, friction coefficient, corrosion protection in various environments, uniformity of thickness, fitness for contact with food, and cost. Paper edition (unseen), $124.00. Annotation copyrighted by Book News, Inc., Portland, OR

Surface finishing is a broad range of industrial processes that alter the surface of a manufactured item to achieve a certain property. Currently, the trend is towards surface treatments. Surface engineering techniques are generally used to develop a wide range of functional properties, including physical, chemical, electrical, electronic, magnetic, mechanical, wear-resistant and corrosion-resistant properties at the required substrate surfaces. In general, coatings are desirable, or even necessary, for a variety of reasons including economics, material conservation, unique properties, or the engineering and design flexibility which can be obtained by separating the surface properties from the bulk properties. Surface engineered products thus increase performance, reduce costs, control surface properties independently of the substrate and medium, thus offering an enormous potential in the finishing Industry. Electrodepositing of metals is a very significant industrial process. Electroplating is both an art and science .It entailed adhering a thin metal coating to an object by immersing it into an electrically charged solvent containing the dissolved plating metal. Electroplating served a number of functions, such as protecting from corrosion and wear, decoration, and electrical shielding. Anodizing most closely resembles standard electroplating. Anodizing or anodizing is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts. Anodizing increases corrosion resistance and wears resistance, and provides better adhesion for paint primers and glues than bare metal. Anodic films are most commonly applied to protect aluminium alloys.The aim of this handbook is to give the reader a perspective on several metal surface treatment techniques which are generally followed in the finishing Industry. This is a unique compilation and it draws together in a single source technical principles of surface science and surface treatments technologies of plastics, elastomers, and metals along with various formulae of bath solutions, current density, deposit thickness, manufacturing processes, various ingredients used in these processes. It is a very useful guide for the readers, engineers, scientists, practitioners of surface treatment, researchers, students, entrepreneurs and others involved in materials adhesion and processing.

This practical handbook provides an introduction to all aspects of decorative, protective and engineering finishes applicable to aluminium. Descriptions of the processes concerned, including properties and methods of application, their benefits and limitations, are given, making this manual a useful asset to managers, technologists and students.

This book contains the papers and discussions constituting the symposium on the surface treatment of metals presented before the twenty-second annual convention of the American Society for metals held in Cleveland, October 21 to 25, 1940.

The objective of this second edition remains the discussion of the many diverse roles of electrochemical technology in industry. Throughout the book, the intention is to emphasize that the applications, though extremely diverse, all are on the same principles of electrochemistry and electrochemical engineer based ing. Those familiar with the first edition will note a significant increase in the number of pages. The most obvious addition is the separate chapter on electrochemical sensors but, in fact, all chapters have been reviewed thoroughly and many have been altered substantially. These changes to the book partly reflect the different view of a second author as well as comments from students and friends. Also, they arise inevitably from the vitality and strength of electrochemical technology; in addition to important improvements in tech nology, new electrolytic processes and electrochemical devices continue to be reported. In the preface to the first edition it was stated: . . . the future for electrochemical technology is bright and there is a general expectation that new applications of electrochemistry will become economic as the world responds to the challenge of more expensive energy, of the need to develop new materials and to exploit different chemical feedstocks and of the necessity to protect the environment. The preparation of this second edition, seven years after these words were written, provided an occasion to review the progress of industrial electro chemistry.