Probabilistic Prognostics And Health Management Of Energy Systems

This book proposes the formulation of an efficient methodology that estimates energy system uncertainty and predicts Remaining Useful Life (RUL) accurately with significantly reduced RUL prediction uncertainty. Renewable and non-renewable sources of energy are being used to supply the demands of societies worldwide. These sources are mainly thermo-chemo-electro-mechanical systems that are subject to uncertainty in future loading conditions, material properties, process noise, and other design parameters.It book informs the reader of existing and new ideas that will be implemented in RUL prediction of energy systems in the future. The book provides case studies, illustrations, graphs, and charts. Its chapters consider engineering, reliability, prognostics and health management, probabilistic multibody dynamical analysis, peridynamic and finite-element modelling, computer science, and mathematics.

The idea of preparing an Energies Special Issue on “Structural Prognostics and Health Management in Power & Energy Systems” is to compile information on the recent advances in structural prognostics and health management (SPHM). Continued improvements on SPHM have been made possible through advanced signature analysis, performance degradation assessment, as well as accurate modeling of failure mechanisms by introducing advanced mathematical approaches/tools. Through combining deterministic and probabilistic modeling techniques, research on SPHM can provide assurance for new structures at a design stage and ensure construction integrity at a fabrication phase. Specifically, power and energy system failures occur under multiple sources of uncertainty/variability resulting from load variations in usage, material properties, geometry variations within tolerances, and other uncontrolled variations. Thus, advanced methods and applications for theoretical, numerical, and experimental contributions that address these issues on SPHM are desired and expected, which attempt to prevent overdesign and unnecessary inspection and provide tools to enable a balance between safety and economy to be achieved. This Special Issue has attracted submissions from China, USA, Portugal, and Italy. A total of 26 submissions were received and 11 articles finally published.

The idea of preparing an Energies Special Issue on “Structural Prognostics and Health Management in Power & Energy Systems” is to compile information on the recent advances in structural prognostics and health management (SPHM). Continued improvements on SPHM have been made possible through advanced signature analysis, performance degradation assessment, as well as accurate modeling of failure mechanisms by introducing advanced mathematical approaches/tools. Through combining deterministic and probabilistic modeling techniques, research on SPHM can provide assurance for new structures at a design stage and ensure construction integrity at a fabrication phase. Specifically, power and energy system failures occur under multiple sources of uncertainty/variability resulting from load variations in usage, material properties, geometry variations within tolerances, and other uncontrolled variations. Thus, advanced methods and applications for theoretical, numerical, and experimental contributions that address these issues on SPHM are desired and expected, which attempt to prevent overdesign and unnecessary inspection and provide tools to enable a balance between safety and economy to be achieved. This Special Issue has attracted submissions from China, USA, Portugal, and Italy. A total of 26 submissions were received and 11 articles finally published.

In the age of digitalization and the fourth industrial revolution, predictive maintenance is becoming increasingly important as a proactive maintenance type. Despite the economic benefits that predictive maintenance generates for companies, its practical application is still in its early stages. This is often due to two prevailing challenges. First, there is a deficiency of knowledge about predictive maintenance and its concrete realization. Second, there is a lack of high quality and rich data of historical machine failures. To increase the representativeness of data, data from several similar machines (i.e. a fleet) should be considered. To foster the effective implementation of predictive maintenance, supportive guidance in the realization of a predictive maintenance project is needed. For this reason, this dissertation presents a process reference model and a development method for fleet prognostics. The process reference model describes a comprehensive and application-independent view of the complete predictive maintenance process. The model is supplemented by the fleet prognostic development method. To address the specific characteristics of the fleet, a systematic process is depicted which provides a means to assess the heterogeneity of the fleet from a data-driven perspective and simplifies the design of an algorithm considering fleet data. Finally, the applicability and value of the research results are demonstrated with three industrial cases

Traditionally fatigue, fracture, damage mechanics are predictions are based on empirical curve fitting models based on experimental data. However, when entropy is used as the metric for degradation of the material, the modeling process becomes physics based rather than empirical modeling. Because, entropy generation in a material can be calculated from the fundamental equation of thematerial. This collection of manuscripts is about using entropy for "Fatigue, Fracture, Failure Prediction and Structural Health Monitoring". The theoretical paper in the collection provides the mathematical and physics framework behind the unified mechanics theory, which unifies universal laws of motion of Newton and laws of thermodynamics at ab-initio level. Unified Mechanics introduces an additional axis called, Thermodynamic State Index axis which is linearly independent from Newtonian space x, y, z and time. As a result, derivative of displacement with respect to entropy is not zero, in unified mechanics theory, as in Newtonian mechanics. Any material is treated as a thermodynamic system and fundamental equation of the material is derived. Fundamental equation defines entropy generation rate in the system. Experimental papers in the collection prove validity of using entropy as a stable metric for Fatigue, Fracture, Failure Prediction and Structural Health Monitoring.

The development of artificial intelligence (AI) involves the creation of computer systems that can do activities that would ordinarily require human intelligence, such as visual perception, speech recognition, decision making, and language translation. Through increasingly complex programming approaches, it has been transforming and advancing the discipline of computer science. The Handbook of Research on AI Methods and Applications in Computer Engineering illuminates how today’s computer engineers and scientists can use AI in real-world applications. It focuses on a few current and emergent AI applications, allowing a more in-depth discussion of each topic. Covering topics such as biomedical research applications, navigation systems, and search engines, this premier reference source is an excellent resource for computer scientists, computer engineers, IT managers, students and educators of higher education, librarians, researchers, and academicians.

This book examines key issues in improving the efficiency of small and medium power boiler units by adding control systems for the fuel combustion process. The original models, algorithms, software and hardware of the system developed for controlling the fuel combustion process are presented. In turn, the book presents a methodology for assessing the influence of climatic factors on the combustion process, and proposes new methods for measuring the thermophysical characteristics, which require taking into account the concentration of oxygen in the air. The system developed here was implemented on a boiler of the NIISTU-5 type, which is widely used for heat power engineering in Ukraine and other Eastern European countries. Given its scope, the book offers a valuable asset for researchers and engineers, as well as lecturers and graduate students at higher education institutions dealing with heat engineering equipment.

This book is aimed at researchers, industry professionals and students interested in the broad ranges of disciplines related to condition monitoring of machinery working in non-stationary conditions. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO’2018, held on June 20 – 22, 2018, in Santander, Spain. The book describes both theoretical developments and a number of industrial case studies, which cover different topics, such as: noise and vibrations in machinery, conditioning monitoring in non-stationary operations, vibro-acoustic diagnosis of machinery, signal processing, application of pattern recognition and data mining, monitoring and diagnostic systems, faults detection, dynamics of structures and machinery, and mechatronic machinery diagnostics.