Process Engineering Calculations

Process Safety Calculations is an essential guide for process safety engineers involved in calculating and predicting risks and consequences. The book focuses on calculation procedures based on basic chemistry, thermodynamics, fluid dynamics, conservation equations, kinetics and practical models. This book provides helpful calculations to demonstrate compliance with regulations and standards. Standards such as Seveso directive(s)/COMAH, CLP regulation, ATEX directives, PED directives, REACH regulation, OSHA/NIOSH and UK ALARP are covered, along with risk and consequence assessment, stoichiometry, thermodynamics, stress analysis and fluid-dynamics. Includes realistic engineering models with validation from CFD modeling and/or industry testing Provides an introduction into basic principles that govern process relationships in modern industry Helps the reader find and apply the right principles to the specific problem being solved, mitigated or validated

A compilation of the calculation procedures needed every day on the job by chemical engineers. Tables of Contents: Physical and Chemical Properties; Stoichiometry; Phase Equilibrium; Chemical-Reaction Equilibrium; Reaction Kinetics and Reactor Design; Flow of Fluids and Solids; Heat Transfer; Distillation; Extraction and Leaching; Crystallization; Filtration; Liquid Agitation; Size Reduction; Drying: Evaporation; Environmental Engineering in the Plant. Illustrations. Index.

This textbook, Material Balance and Process Calculations, has been carefully written to teach you important topics in material balance and process calculations by explaining them with a mindset to fully equip you in the topics. Whether you want this book for general studies of these topics or you want this book to study for an exam, you will find it a very useful tool.This textbook is a mass balance teacher which is suitable for students in universities and students in colleges. It will also serve as a useful tool for direct entry students who are preparing for entrance examinations into colleges and universities. This book is not only for engineering students but also for chemistry students or any student who is offering a course in chemistry.The step by step explanations presented in the worked examples are easy to understand since care was taken to sufficiently explain salient points and process ideas. Efforts have been made to achieve a complete and simplified explanation of every example given in this textbook. Many worked examples have been included in each topic in order to fully cover every complexity the topic might contain. This book will boost your level of understanding of material balance and process calculations. Numerous exercises at the end of each chapter are intended to test students' understanding of the topic. Therefore students are thus presented with an effective means of self-assessment whereby they can determine their individual strengths and revision needs.The topics covered in this eBook include: