Programmable Logic Controllers

This book gives an introduction to Structured Text (ST), used in Programmable Logic Control (PLC). The book can be used for all types of PLC brands including Siemens Structured Control Language (SCL) and Programmable Automation Controllers (PAC). Contents: - Background, advantage and challenge when ST programming - Syntax and fundamental ST programming - Widespread guide to reasonable naming of variables - CTU, TOF, TON, CASE, STRUCT, ENUM, ARRAY, STRING - Guide to split-up into program modules and functions - More than 90 PLC code examples in black/white - FIFO, RND, 3D ARRAY and digital filter - Examples: From LADDER to ST programming - Guide to solve programming exercises Many clarifying explanations to the PLC code and focus on the fact that the reader should learn how to write a stable, robust, readable, structured and clear code are also included in the book. Furthermore, the focus is that the reader will be able to write a PLC code, which does not require a specific PLC type and PLC code, which can be reused. The basis of the book is a material which is currently compiled with feedback from lecturers and students attending the AP Education in Automation Engineering at the local Dania Academy, "Erhvervsakademi Dania", Randers, Denmark. The material is thus currently updated so that it answers all the questions which the students typically ask through-out the period of studying. The author is Bachelor of Science in Electrical Engineering (B.Sc.E.E.) and has 25 years of experience within specification, development, programming and supplying complex control solutions and supervision systems. The author is Assistant Professor and teaching PLC control systems at higher educations. LinkedIn: https://www.linkedin.com/in/tommejerantonsen/

This is the introduction to PLCs for which baffled students, technicians and managers have been waiting. In this straightforward, easy-to-read guide, Bill Bolton has kept the jargon to a minimum, considered all the programming methods in the standard IEC 1131-3 - in particular ladder programming, and presented the subject in a way that is not device specific to ensure maximum applicability to courses in electronics and control systems. Now in its fourth edition, this best-selling text has been expanded with increased coverage of industrial systems and PLCs and more consideration has been given to IEC 1131-3 and all the programming methods in the standard. The new edition brings the book fully up to date with the current developments in PLCs, describing new and important applications such as PLC use in communications (e.g. Ethernet – an extremely popular system), and safety – in particular proprietary emergency stop relays (now appearing in practically every PLC based system). The coverage of commonly used PLCs has been increased, including the ever popular Allen Bradley PLCs, making this book an essential source of information both for professionals wishing to update their knowledge, as well as students who require a straight forward introduction to this area of control engineering. Having read this book, readers will be able to: * Identify the main design characteristics and internal architecture of PLCs * Describe and identify the characteristics of commonly used input and output devices * Explain the processing of inputs and outputs of PLCs * Describe communication links involved with control systems * Develop ladder programs for the logic functions AND, OR, NOT, NAND, NOT and XOR * Develop functional block, instruction list, structured text and sequential function chart programs * Develop programs using internal relays, timers, counters, shift registers, sequencers and data handling * Identify safety issues with PLC systems * Identify methods used for fault diagnosis, testing and debugging programs Fully matched to the requirements of BTEC Higher Nationals, students are able to check their learning and understanding as they work through the text using the Problems section at the end of each chapter. Complete answers are provided in the back of the book. * Thoroughly practical introduction to PLC use and application - not device specific, ensuring relevance to a wide range of courses * New edition expanded with increased coverage of IEC 1131-3, industrial control scenarios and communications - an important aspect of PLC use * Problems included at the end of each chapter, with a complete set of answers given at the back of the book

Programmable Logic Controllers begins by covering the hardware and architecture of the Allen-Bradley Small Logic Controller (SLC 500) series of PLCs. I/O devices and motor controls are also covered as well as commonly used number systems, such as binary and BCD. PLC programming is introduced by reviewing and creating examples of relay ladder diagrams. In the following chapter, students are given guidelines and examples for creating PLC ladder diagrams based on relay ladder diagrams. Throughout the rest of the textbook, the most common PLC functions are presented, and practical examples are given based on the Allen-Bradley RSLogix programming software. The Laboratory Manual provides LogixPro activities that help students practice and hone their PLC programming skills. Included in the textbook is a CD-ROM containing LogixPro simulation software. The software allows students to practice and develop their programming skills when and where they want. LogixPro is not a replacement for RSLogix, nor is there support for file exchange or communication with actual Allen-Bradley products. LogixPro provides a complete software-based training solution, eliminating the need for expensive PLC equipment.

Widely used across industrial and manufacturing automation, Programmable Logic Controllers (PLCs) perform a broad range of electromechanical tasks with multiple input and output arrangements, designed specifically to cope in severe environmental conditions such as automotive and chemical plants. Programmable Logic Controllers: A Practical Approach using CoDeSys is a hands-on guide to rapidly gain proficiency in the development and operation of PLCs based on the IEC 61131-3 standard. Using the freely-available* software tool CoDeSys, which is widely used in industrial design automation projects, the author takes a highly practical approach to PLC design using real-world examples. The design tool, CoDeSys, also features a built in simulator/soft PLC enabling the reader to undertake exercises and test the examples. Key features: Introduces to programming techniques using IEC 61131-3 guidelines in the five PLC-recognised programming languages. Focuses on a methodical approach to programming, based on Boolean algebra, flowcharts, sequence diagrams and state-diagrams. Contains a useful methodology to solve problems, develop a structured code and document the programming code. Covers I/O like typical sensors, signals, signal formats, noise and cabling. Features Power Point slides covering all topics, example programs and solutions to end-of-chapter exercises via companion website. No prior knowledge of programming PLCs is assumed making this text ideally suited to electronics engineering students pursuing a career in electronic design automation. Experienced PLC users in all fields of manufacturing will discover new possibilities and gain useful tips for more efficient and structured programming. * Register at www.codesys.com www.wiley.com/go/hanssen/logiccontrollers

A programmable logic controllers (PLC) is a real-time system optimized for use in severe conditions such as high/low temperatures or an environment with excessive electrical noise. This control technology is designed to have multiple interfaces (I/Os) to connect and control multiple mechatronic devices such as sensors and actuators. Programmable Logic Controllers, Fifth Edition, continues to be a straight forward, easy-to-read book that presents the principles of PLCs while not tying itself to one vendor or another. Extensive examples and chapter ending problems utilize several popular PLCs currently on the market highlighting understanding of fundamentals that can be used no matter the specific technology. Ladder programming is highlighted throughout with detailed coverage of design characteristics, development of functional blocks, instruction lists, and structured text. Methods for fault diagnosis, testing and debugging are also discussed. This edition has been enhanced with new material on I/Os, logic, and protocols and networking. For the UK audience only: This book is fully aligned with BTEC Higher National requirements. *New material on combinational logic, sequential logic, I/Os, and protocols and networking *More worked examples throughout with more chapter-ending problems *As always, the book is vendor agnostic allowing for general concepts and fundamentals to be taught and applied to several controllers