Progress In Adhesion And Adhesives

With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. Based on the success of the preceding volumes in this series “Progress in Adhesion and Adhesives”), the present volume comprises 12 review articles published in Volume 5 (2017) of Reviews of Adhesion and Adhesives. The subject of these 12 reviews fall into the following general areas. Nanoparticles in reinforced polymeric composites. Wettability behavior and its modification, including superhydrophobic surfaces. Ways to promote adhesion, including tuber adhesion. Adhesives and adhesive joints Dental adhesion. The topics covered include: Nanoparticles as interphase modifiers in fiber reinforced polymeric composites; fabrication of micro/nano patterns on polymeric substrates to control wettability behavior; plasma processing of aluminum alloys to promote adhesion; UV-curing of adhesives; functionally graded adhesively bonded joints; adhesion between unvulgarized elastomers; electrowetting for digital microfluidics; control of biofilm at the tooth-restoration bonding interface; easy-to-clean superhydrophobic coatings; cyanoacrylates; promotion of resin-dentin bond longevity in adhesive dentistry; and effects of nanoparticles on nanocomposites Mode I and Mode II fractures.

The current book contains eight commissioned chapters and cover topics including stress distribution and design analysis of adhesively bonded tubular composite joints; durability of structural adhesive joints; mechanical surface treatment of adherends for adhesive bonding; surface modification of polymer materials by excimer UV light; corona discharge treatment of materials to enhance adhesion; adhesion activation of aramid fibers; dual-cured hydrogels for bioadhesives and biomedical applications; and non-adhesive SLIPS-like surfaces.

With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. Based on the success of the preceding volumes in this series “Progress in Adhesion and Adhesives”, the present volume comprises 13 review articles published in Volume 7 (2019) of Reviews of Adhesion and Adhesives. The subjects of these review articles fall into the following areas: Adhesively bonded joints Adhesives (including bioadhesives) and their applications Nanocomposite polymer adhesives Polymer surface modification Wettability and surface free energy Adhesion of bacteria The topics covered include: Adhesion behavior of plasma treated steel and its alloys; debonding on demand of adhesively bonded joints; bioadhesive polymers; adhesives in the footwear industry; nanocomposite polymer adhesives; ion beam treatment of polymer surfaces to enhance adhesion; natural to artificial non-wettable surfaces and applications; plasma oxidation of polyolefins; wettability and surface free energy characterization of textiles; bioadhesive nanoformulations; laser-assisted tailoring of surface wettability; functionally graded adhesively bonded joints; adhesion of colloids and bacteria to porous media.

A solid collection of interdisciplinary review articles on the latest developments in adhesion science and adhesives technology With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. Based on the success of the preceding volumes in this series "Progress in Adhesion and Adhesives"), the present volume comprises 9 review articles published in Volume 6 (2018) of Reviews of Adhesion and Adhesives. The subject of these reviews fall into the following general areas: 1. Adhesion to wood and wood bonds 2. Adhesive joints 3. Adhesion in microelectronic packaging 4. Surface modification 5. Contact angle, wettability and surface free energy. The topics covered include: Adhesion phenomena in microelectronic packaging; adhesives for wood and lignocellulosic materials; adhesion to wood and lignocellulosic materials; adhesively bonded lap joints having bi-adhesive and modulus-graded bondlines; adhesion between compounded elastomers; applications of contact angle measurements in pharmaceuticals and foods; oxygen or ammonia plasma treatment of polyolefin surfaces; surface free energy determination of powders and particles; wood bonds; and dispersion adhesion forces between macroscopic objects.

With the voluminous research being published, it is difficult, if not impossible, to stay abreast of current developments in a given area. The review articles in this book consolidate information to provide an alternative way to follow the latest research activity and developments in adhesion science and adhesives. With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. The 19 chapters in this Volume 6 follow the same order as the review articles originally published in RAA in the year 2020 and up to June 2021. The subjects of these 19 chapters fall in the following areas: Adhesives and adhesive joints Contact angle Reinforced polymer composites Bioadhesives Icephobic coatings Adhesives based on natural resources Polymer surface modification Superhydrophobic surfaces The topics covered include: hot-melt adhesives; adhesively-bonded spar-wingskin joints; contact angle hysteresis; fiber/matrix adhesion in reinforced thermoplastic composites; bioadhesives in biomedical applications; mucoadhesive pellets for drug delivery applications; bio-inspired icephobic coatings; wood adhesives based on natural resources; adhesion in biocomposites; vacuum UV surface photo-oxidation of polymers and other materials; vitrimers and their relevance to adhesives; superhydrophobic surfaces by microtexturing; structural acrylic adhesives; mechanically durable water-repellent surfaces; mussel-inspired underwater adhesives; and cold atmospheric pressure plasma technology for modifying polymers. Audience This book will be valuable and useful to researchers and technologists in materials science, nanotechnology, physics, surface and colloid chemistry in multiple disciplines in academia, industry, various research institutes and other organizations.

The book series ‘Progress in Adhesion and Adhesives’ was conceived as an annual publication and the premier volume made its debut in 2015. The series has been well-received as it is unique and provides substantive and curated review chapters on subjects that touch many disciplines. The current book contains 9 chapters on topics that include multi-component theories in surface thermodynamics and adhesion science; plasma-deposited polymer layers as adhesion promotors; functional interlayers to control interfacial adhesion in reinforced polymer composites; hydrophobic materials, and coatings from natural sources; mechanics of ice adhesion; epoxy adhesives technology; Latest developments and trends; hot-melt adhesives for automobile assembly; lifetime estimation of thermostat adhesives by physical and chemical aging processes; and nondestructive evaluation and condition monitoring of adhesive joints.

Adhesive bonding is often effective, efficient, and often necessary way to join mechanical structures. This important book reviews the most recent improvements in adhesive bonding and their wide-ranging potential in structural engineering. Part one reviews advances in the most commonly used groups of structural adhesives with chapters covering topics such as epoxy, polyurethane, silicone, cyanoacrylate, and acrylic adhesives. The second set of chapters covers the various types of adherends and pre-treatment methods for a range of structural materials such as metals, composites and plastics. Chapters in Part three analyse methods and techniques with topics on joint design, life prediction, fracture mechanics and testing. The final group of chapters gives useful and practical insights into the problems and solutions of adhesive bonding in a variety of hostile environments such as chemical, wet and extreme temperatures. With its distinguished editor and international team of contributors, Advances in structural adhesive bonding is a standard reference for structural and chemical engineers in industry and the academic sector. Reviews advances in the most commonly used groups of structural adhesives including epoxy, silicone and acrylic adhesives Examines key issues in adhesive selection featuring substrate compatibility and manufacturing demands Documents advances in bonding metals, plastics and composites recognising problems and limitations