Real Time Forecasting For Renewable Energy Development

"A significant barrier to the widespread adoption of many forms of renewable energy, including wind, solar, and marine and hydrokinetic power, is that these sources are intermittent. Electric grid managers address this intermittency by adjusting the delivery of other sources of power based on expected changes in renewable power output. These expected changes are called power production forecasts. Such forecasts must take into account changing weather conditions in conjunction with the land's topography near a renewable energy device, along with the device's expected technical performance ... Several recent reports have determined that improving the accuracy and frequency of these forecasts can have a major impact on the economic viability of renewable energy resources" ... This hearing provides "testimony on the roles that various Federal agencies as well as the private sector play in providing forecasting data and services relevant to expanding the availability of reliable, renewable power, and the extent to which these efforts are coordinated. The hearing will also explore any research, development, demonstration, and monitoring needs that are not currently being adequately addressed."--P. 3-4.

Renewable Energy Forecasting: From Models to Applications provides an overview of the state-of-the-art of renewable energy forecasting technology and its applications. After an introduction to the principles of meteorology and renewable energy generation, groups of chapters address forecasting models, very short-term forecasting, forecasting of extremes, and longer term forecasting. The final part of the book focuses on important applications of forecasting for power system management and in energy markets. Due to shrinking fossil fuel reserves and concerns about climate change, renewable energy holds an increasing share of the energy mix. Solar, wind, wave, and hydro energy are dependent on highly variable weather conditions, so their increased penetration will lead to strong fluctuations in the power injected into the electricity grid, which needs to be managed. Reliable, high quality forecasts of renewable power generation are therefore essential for the smooth integration of large amounts of solar, wind, wave, and hydropower into the grid as well as for the profitability and effectiveness of such renewable energy projects. Offers comprehensive coverage of wind, solar, wave, and hydropower forecasting in one convenient volume Addresses a topic that is growing in importance, given the increasing penetration of renewable energy in many countries Reviews state-of-the-science techniques for renewable energy forecasting Contains chapters on operational applications

Lars Dannecker developed a novel online forecasting process that significantly improves how forecasts are calculated. It increases forecasting efficiency and accuracy, as well as allowing the process to adapt to different situations and applications. Improving the forecasting efficiency is a key pre-requisite for ensuring stable electricity grids in the face of an increasing amount of renewable energy sources. It is also important to facilitate the move from static day ahead electricity trading towards more dynamic real-time marketplaces. The online forecasting process is realized by a number of approaches on the logical as well as on the physical layer that we introduce in the course of this book. Nominated for the Georg-Helm-Preis 2015 awarded by the Technische Universität Dresden. Contents The European Electricity Market: A Market Study The Current State of Energy Data Management and Forecasting The Online Forecasting Process: Efficiently Providing Accurate Predictions Optimizations on the Logical Layer: Context-Aware Forecasting Optimizations on the Physical Layer: A Forecast-Model-AwareStorage Target Groups Lecturers and Students of Computer Science, especially in the Field of Database Technology, Data Analytics, Time Series Analysis, and Data Mining Data Analysts, Energy Time Series Modeling, Transmission System Operators, Software Developers The Author Lars Dannecker holds a diploma in media computer science from the Technische Universität Dresden and is pursuing a doctorate as a member of the Database Technology Group led by Prof. Dr.-Ing. Wolfgang Lehner.

Lars Dannecker developed a novel online forecasting process that significantly improves how forecasts are calculated. It increases forecasting efficiency and accuracy, as well as allowing the process to adapt to different situations and applications. Improving the forecasting efficiency is a key pre-requisite for ensuring stable electricity grids in the face of an increasing amount of renewable energy sources. It is also important to facilitate the move from static day ahead electricity trading towards more dynamic real-time marketplaces. The online forecasting process is realized by a number of approaches on the logical as well as on the physical layer that we introduce in the course of this book. Nominated for the Georg-Helm-Preis 2015 awarded by the Technische Universität Dresden.

This book outlines the challenges that increasing amounts of renewable and distributed energy represent when integrated into established electricity grid infrastructures, offering a range of potential solutions that will support engineers, grid operators, system planners, utilities, and policymakers alike in their efforts to realize the vision of moving toward greener, more secure energy portfolios. Covering all major renewable sources, from wind and solar, to waste energy and hydropower, the authors highlight case studies of successful integration scenarios to demonstrate pathways toward overcoming the complexities created by variable and distributed generation.

Published as an Open Access book available on Science Direct, IEA Wind Recommended Practices for the Implementation of Renewable Energy Forecasting Solutions translates decades of academic knowledge and standard requirements into applicable procedures and decision support tools for the energy industry. Designed specifically for practitioners in the energy industry, readers will find the tools to maximize the value of renewable energy forecast information in operational decision-making applications and significantly reduce the costs of integrating large amounts of wind and solar generation assets into grid systems through more efficient management of the renewable generation variability. Authored by a group of international experts as part of the IEA Wind Task 36 (Wind Energy Forecasting), the book addresses the issue that many current operational forecast solutions are not properly optimized for their intended applications. It provides detailed guidelines and recommended practices on forecast solution selection processes, designing and executing forecasting benchmarks and trials, forecast solution evaluation, verification, and validation, and meteorological and power data requirements for real-time forecasting applications. In addition, the guidelines integrate probabilistic forecasting, integrate wind and solar forecasting, offer improved IT data exchange and data format standards, and have a dedicated section to dealing with the requirements for SCADA and meteorological measurements. A unique and comprehensive reference, IEA Wind Recommended Practices for the Implementation of Renewable Energy Forecasting Solutions is an essential guide for all practitioners involved in wind and solar energy generation forecasting from forecast vendors to end-users of renewable forecasting solutions. Brings together the decades-long expertise of authors from a range of backgrounds, including universities and government laboratories, commercial forecasters, and operational forecast end-users into a single comprehensive set of practices Addresses all areas of wind power forecasting, including forecasting methods, measurement selection, setup and data quality control, and the evaluation of forecasting processes related to renewable energy forecasting Provides purpose-built decision-support tools, process diagrams, and code examples to help readers visualize and navigate the book and support decision-making

ARTIFICIAL INTELLIGENCE FOR RENEWABLE ENERGY SYSTEMS Renewable energy systems, including solar, wind, biodiesel, hybrid energy, and other relevant types, have numerous advantages compared to their conventional counterparts. This book presents the application of machine learning and deep learning techniques for renewable energy system modeling, forecasting, and optimization for efficient system design. Due to the importance of renewable energy in today’s world, this book was designed to enhance the reader’s knowledge based on current developments in the field. For instance, the extraction and selection of machine learning algorithms for renewable energy systems, forecasting of wind and solar radiation are featured in the book. Also highlighted are intelligent data, renewable energy informatics systems based on supervisory control and data acquisition (SCADA); and intelligent condition monitoring of solar and wind energy systems. Moreover, an AI-based system for real-time decision-making for renewable energy systems is presented; and also demonstrated is the prediction of energy consumption in green buildings using machine learning. The chapter authors also provide both experimental and real datasets with great potential in the renewable energy sector, which apply machine learning (ML) and deep learning (DL) algorithms that will be helpful for economic and environmental forecasting of the renewable energy business. Audience The primary target audience includes research scholars, industry engineers, and graduate students working in renewable energy, electrical engineering, machine learning, information & communication technology.

This book introduces the principle of carrying out a medium-term load forecast (MTLF) at power system level, based on the Big Data concept and Convolutionary Neural Network (CNNs). It also presents further research directions in the field of Deep Learning techniques and Big Data, as well as how these two concepts are used in power engineering. Efficient processing and accuracy of Big Data in the load forecast in power engineering leads to a significant improvement in the consumption pattern of the client and, implicitly, a better consumer awareness. At the same time, new energy services and new lines of business can be developed. The book will be of interest to electrical engineers, power engineers, and energy services professionals.