Reinforced Concrete With Worked Examples

This textbook describes the design of reinforced and prestressed concrete structures according to the latest advances both in the field of materials, concrete and steel, and in the field of structural analysis. These advances have been included in current version of Eurocode 2, which is taken as reference. All subjects are presented starting from their theoretical bases and passing to corresponding EC2 formulations. A large part of the book is concerned with the most innovative EC2 parts, like nonlinear structural analyses, second-order effects, punching and strut-and-tie models. The textbook is equipped with numerous worked examples, useful for the reader who is not familiar with the design of reinforced and prestressed concrete structures by the Limit State Method. Examples have been chosen among the most frequent cases of the professional practice. Thanks to this structure, it can be of interest both to structural designers for their professional training and to students of engineering and architecture schools for their studies. The volume contains twelve chapters, which follow the same structure of EC2, except for chapter 6 (dealing with prestressed concrete structures), which does not match any chapter of EC2, as prestressed concrete is considered in EC2 as a particular case of reinforced concrete, and corresponding formulations are shed over different chapters.

This new edition of a highly practical text gives a detailed presentation of the design of common reinforced concrete structures to limit state theory in accordance with BS 8110.

This practical design guide illustrates through worked examples how Eurocode 2 may be used in practice. Complete and detailed designs of six archetypal building and public utility structures are provided. The book caters to students and engineers with little or no practical experience of design, as well as to more experienced engineers who may be u

The latest edition of this well-known book makes available to structural design engineers a wealth of practical advice on effective design of concrete structures. It covers the complete range of concrete elements and includes numerous data sheets, charts and examples to help the designer. It is fully updated in line with the relevant British Standards and Codes of Practice.

This book is the companion volume to Design Examples for High Strength Steel Reinforced Concrete Columns – A Eurocode 4 Approach. Guidance is much needed on the design of high strength steel reinforced concrete (SRC) columns beyond the remit of Eurocode 4. Given the much narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete, there is a clear need for design beyond the guidelines. This book looks at the design of SRC columns using high strength concrete, high strength structural steel and high strength reinforcing steel materials – columns with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. The companion volume provides detailed worked examples on use of these high strength materials. This book is written primarily for structural engineers and designers who are familiar with basic EC4 design, and should also be useful to civil engineering undergraduate and graduate students who are studying composite steel concrete design and construction. Equations for design resistances are presented clearly so that they can be easily programmed into design spreadsheets for ease of use.

This practical design guide illustrates through worked examples how Eurocode 2 may be used in practice. Complete and detailed designs of six archetypal building and public utility structures are provided. The book caters to students and engineers with little or no practical experience of design, as well as to more experienced engineers who may be unfamiliar with Eurocode 2. Chapter 1 provides an introduction to the Structural Eurocodes, with particular reference to actions on structures. Chapter 2 describes the principles, requirements and methods used for the design of members. This is followed by worked examples for the following structures: A multi-storey office building with three forms of floor construction A basement to the office building with three types of foundations A free-standing cantilever earth-retaining wall A large underground service reservoir An open-top rectangular tank on an elastic soil An open-top cylindrical tank on an elastic soil In addition to the design of all the elements, the analysis of each structure is fully explained. This applies particularly to the design of the basement, and the tanks bearing on elastic soils, for which specially derived tables are included in appendices to the book. The calculations are complemented by reinforcement drawings in accordance with the recommendations in the third edition (2006) of the Standard method of detailing structural concrete, with commentaries on the bar arrangements. This book can be used as a stand-alone publication, or as a more detailed companion to Reynolds’s Reinforced Concrete Designer’s Handbook, now in its 11th edition. The comprehensive treatment of the designs, and the variety of structures considered, make this a unique and invaluable work.

This Book Systematically Explains The Basic Principles And Techniques Involved In The Design Of Reinforced Concrete Structures. It Exhaustively Covers The First Course On The Subject At B.E./ B.Tech Level.Important Features: * Exposition Is Based On The Latest Indian Standard Code Is: 456-2000. * Limit State Method Emphasized Throughout The Book. * Working Stress Method Also Explained. * Detailing Aspects Of Reinforcement Highlighted. * Incorporates Earthquake Resistant Design. * Includes A Large Number Of Solved Examples, Practice Problems And Illustrations.The Book Would Serve As A Comprehensive Text For Undergraduate Civil Engineering Students. Practising Engineers Would Also Find It A Valuable Reference Source.

This book is the companion volume to Design of High Strength Steel Reinforced Concrete Columns – A Eurocode 4 Approach. This book provides a large number of worked examples for the design of high strength steel reinforced concrete (SRC) columns. It is based on the Eurocode 4 approach, but goes beyond this to give much needed guidance on the narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete. Special considerations are given to resistance calculations that maximize the full strength of the materials, with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. These examples build on the design principles set out in the companion volume, allowing the readers to practice and understand the EC4 methodology easily. Structural engineers and designers who are familiar with basic EC4 design should find these design examples particularly helpful, whilst engineering undergraduate and graduate students who are studying composite steel concrete design and construction should easily gain further understanding from working through the worked examples which are set out in a step-by-step clearly fashion.