Report 39 Experimental Determination Of The Stress Crack Opening Curve For Concrete In Tension Final Report Of Rilem Technical Committee Tc 187 Soc

The book presents the work of the RILEM Technical Committee 261-CCF, which organized the challenging International Round Robin Test (RRT) on the creep behaviour of Fibre Reinforce Concrete (FRC) cracked specimens. Although different creep test methodologies have been developed in recent years, the absence of a standardised creep methodology hindered general comparisons. Therefore, the RILEM TC 261-CCF launched an ambitious international RRT program to improve the knowledge on long-term behaviour of cracked sections of FRC and assess all the different testing methodologies, assuming the big variability of testing criteria among the scientific community. The participation of 19 laboratories across 20 institutions in 14 countries all over the world enabled the realisation of the largest experimental campaign on creep in the cracked state. As a result of the RRT, an extensive database of creep test results was created containing comprehensive information from 124 cracked FRC specimens tested using different creep testing procedures in agreed conditions. The book will benefit academics and practitioners interested in the long-term behaviour of FRC since it served as basis for the recently published RILEM Recommendation on creep testing procedure and represents the current knowledge on creep in cracked FRC specimens.

The research and its outcomes presented in this book treat applications of NDT techniques to on-site measurements. These on-site measurements have been marginally successful as each technique requires a particular analysis. In this regard, visualization and imaging of results are in great demand for practitioners and engineers for inspection. This volume, in which on-site measurements of concrete and masonry structures by NDT techniques are comprehensively summarized, focuses on the visualization procedure of the results measured. The book will therefore be of great value to the field.

This book provides a State of the Art Report (STAR) produced by RILEM Technical Committee 254-CMS ‘Thermal Cracking of Mas-sive Concrete Structures’. Several recent developments related to the old problem of understanding/predicting stresses originated from the evolution of the hydration of concrete are at the origin of the creation this technical committee. Having identified a lack in the organization of up-to-date scientific and technological knowledge about cracking induced by hydration heat effects, this STAR aims to provide both practitioners and scientists with a deep integrated overview of consolidated knowledge, together with recent developments on this subject.

This volume gathers the latest advances, innovations and applications in the field of crack control in concrete, as presented by leading international researchers and engineers at the International RILEM Conference on Early-age and Long-term Cracking in RC Structures (CRC 2021), held in Paris, France on April 9, 2021. It covers early-age and long-term imposed deformations in concrete, analytical formulations for calculating crack widths in concrete, numerical simulations of early-age and long-term restrained behaviour of concrete elements, experimental investigations on cracking, on-site monitoring of imposed deformations and cracking, crack control and repair, and sustainability of design and remediation. The conference demonstrated that a comprehensive approach to this problem requires the design of robust experimental techniques, the development of multiscale models and the evaluation of code-based and other analytical approaches relevant to crack control in concrete. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.

In the recent past, new materials, laboratory and in-situ testing methods and construction techniques have been introduced. In addition, modern computational techniques such as the finite element method enable the utilization of sophisticated constitutive models for realistic model-based predictions of the response of pavements. The 7th RILEM International Conference on Cracking of Pavements provided an international forum for the exchange of ideas, information and knowledge amongst experts involved in computational analysis, material production, experimental characterization, design and construction of pavements. All submitted contributions were subjected to an exhaustive refereed peer review procedure by the Scientific Committee, the Editors and a large group of international experts in the topic. On the basis of their recommendations, 129 contributions which best suited the goals and the objectives of the Conference were chosen for presentation and inclusion in the Proceedings. The strong message that emanates from the accepted contributions is that, by accounting for the idiosyncrasies of the response of pavement engineering materials, modern sophisticated constitutive models in combination with new experimental material characterization and construction techniques provide a powerful arsenal for understanding and designing against the mechanisms and the processes causing cracking and pavement response deterioration. As such they enable the adoption of truly "mechanistic" design methodologies. The papers represent the following topics: Laboratory evaluation of asphalt concrete cracking potential; Pavement cracking detection; Field investigation of pavement cracking; Pavement cracking modeling response, crack analysis and damage prediction; Performance of concrete pavements and white toppings; Fatigue cracking and damage characterization of asphalt concrete; Evaluation of the effectiveness of asphalt concrete modification; Crack growth parameters and mechanisms; Evaluation, quantification and modeling of asphalt healing properties; Reinforcement and interlayer systems for crack mitigation; Thermal and low temperature cracking of pavements; and Cracking propensity of WMA and recycled asphalts.

This book contains the full set of RILEM Recommendations which have been produced to enable engineers, specifiers and testing houses to design and produce concrete which will not suffer damage arising from alkali reactions in the concrete. There are five recommended test methods for aggregates (designated AAR-1 to AAR-5), and an overall recommendation which describes how these should be used to enable a comprehensive aggregate assessment (AAR-0). Additionally, there are two Recommended International Specifications for concrete (AAR-7.1 & 7.2) and a Preliminary International Specification for dams and other hydro structures (AAR-7.3), which describe how the aggregate assessment can be combined with other measures in the design of the concrete to produce a concrete with a minimised risk of developing damage from alkali-aggregate reactions.

The main outcomes of RILEM TC-226-CNM are summarized in this book. Key input was provided by researchers from countries that are main contributors in the R&D, design, construction, operation, and regulation of waste nuclear reinforced concrete facilities. Nuclear power plants and many of the facilities and structures used for the management of radioactive waste materials generated by the fuel cycle use concrete in their construction. RILEM TC 226 CNM covered several areas including functional and performance requirements for concrete structures; degradation processes; phenomenological modelling, field experiences, tests approaches, instrumentation and monitoring methods dedicated to performance assessments; service-life models; aging Management of Nuclear Power Plants, repair techniques; codes and standards specific to radioactive waste facilities.