Report On The L V G Two Seater Biplanes September 1918reports On German Aircraft 16

The LVG C.V was a reconnaissance aircraft produced in large numbers in Germany during World War I. It was a conventional two-bay biplane design of its day, with unstaggered wings of equal span and tandem, open cockpits for the pilot and observer. The ailerons, fitted only to the upper wing, featured aerodynamic balances that extended past the wingtips. The fuselage was a semi-monocoque construction skinned in wood.[Read more]Following the war, some C.Vs were used as civil transports, while some 150 machines captured by Polish forces were put to use by the Polish army. Other post-war users included Russia, Latvia, Lithuania, and Estonia; together operating about 30 aircraft.[Close]

This compendium contains the following reports.TREND OF GERMAN AEROPLANE DESIGN: November 1918 REPORT BY TECHNICAL COMISSION ON GERMAN AEROPLANES AND ENGINES: June 1919REPORT ON THE A.E.G. ARMOURED AEROPLANE: July 1918DEVELOPMENT OF D.F.W GIANT AEROPLANE: April 1919REPORT ON THE FOKKER SINGLE-SEATER BIPLANE D.VII: September 1918REPORT ON FOKKER TRIPLANE, March 1918REPORT ON A.E.G. BOMBER, March 1918REPORTS ON THE FRIEDRICHSHAFEN BOMBER, March 1918REPORT ON THE GOTHA BOMBER. WITH NOTES ON GIANT AEROPLANES, September 1918REDUCTION GEARS USED ON FIVE-ENGINED GIANT GOTHA BOMBER (ENEMY ENGINE REPORT NO.16), June 1919REPORT ON THE HALBERSTADT FIGHTER, September 1918 and October 1918REPORT ON THE HALBERSTADT FIGHTER TYPE C. L. IV., October 1918REPORT ON THE HANNOVERANER BIPLANE, July 1918REPORT ON THE JUNKER ALL-METAL ARMOURED BIPLANE TYPE J.I., July 1919REPORT ON THE JUNKER ALL-METAL SINGLE-SEATER MONOPLANE TYPE D.1., July 1919REPORT ON THE L.V.G. TWO-SEATER BIPLANES, September 1918REPORT ON THE PFALZ SINGLE-SEATER, July 1918REPORT ON THE PFALZ TYPE D.XII SINGLE-SEATER FIGHTER, October 1918REPORT ON THE PFALZ BIPLANE, TYPE D.XV., February 1920REPORT ON THE TWO-SEATER RUMPLER, G. 117., July 1918REPORT ON THE TRANSMISSION AND REDUCTION GEAR OF A SIEMENS BOMBER, May 1919

The Rumpler C.IV was a German single-engine, two-seat reconnaissance biplane. The C.IV was a development of C.III with different tail surfaces and using a Mercedes D.IVa engine in place of C.III's Benz Bz.IV. In addition to the parent company, the aircraft was also built by Pfalz Flugzeugwerke as the Pfalz C.I. Another variant of the basic design was the Rumpler 6B-2 single-seat floatplane fighter, with a 120 kW (160 hp) Mercedes D.III engine, built for the Kaiserliche Marine (Imperial Navy).For a two-seater reconnaissance aircraft, Rumpler C.IV had an excellent performance, which enabled it to remain in front-line service until the end of World War I on the Western Front, as well as in Italy and Palestine. Its exceptional ceiling allowed pilots to undertake reconnaissance secure in the knowledge that few allied aircraft could reach it.The Rumpler C.IV-VII were virtually indistinguishable from the outside.

The Fokker D.VII is widely regarded as the best German aircraft of the war. Its development was championed by Manfred von Richthofen. In January 1918, Richthofen tested the D.VII in the trials at Adlershof but never had an opportunity to fly it in combat. He was killed just days before it entered service. When introduced, the D.VII was not without problems. On occasion its wing ribs would fracture in a dive or high temperatures would cause the gas tank to explode. Even so, the D.VII proved to be durable and easy to fly. As noted by one authority, it had "an apparent ability to to make a good pilot out of mediocre material.." When equipped with the BMW engine, the D.VII could out climb any Allied opponent it encountered in combat. Highly manoeuvrable at all speeds and altitudes, it proved to be more than a match for any of the British or French fighter planes of 1918.

The Hannover CL.III was a two-seat multi-role aircraft, primarily used as a ground attack machine. Like the other Hannover "light-C-class," or "CL" designated aircraft designed by Hermann Dorner, it included an unusual biplane tail, allowing for a greater firing arc for the tail gunner. Until the introduction of the aircraft, such tails had only been used on larger aircraft.Compared to the preceding CL.II, the CL.III had redesigned ailerons with aerodynamic balance areas that overhung the wingtips, a modification that provided greater maneuverability, especially at the low levels that the CL.III was expected to be operating at in its new ground-attack role as the Schutzstaffeln (escort squadrons) were reassigned as Schlactstaffeln (battle squadrons). It was also intended that it should use the excellent Mercedes D.III engine, but the Idflieg gave priority for these engines to fighter production, and most CL.IIIs were produced with the same Argus engine that the CL.II had used. The Argus engined variant was designated CL.IIIa.