Reverse Shoulder Arthroplasty

Focusing exclusively on reverse shoulder arthroplasty (RSA) techniques and devices, this plentifully illustrated text covers all aspects of this important and innovative treatment for shoulder pain and dysfunction. The book begins with a history of RSA followed by a thorough overview of the basic science and biomechanics of the shoulder. Indications for and clinical applications of RSA in a number of surgical interventions are then described, including the revision of failed shoulder arthroplasty, setting in cases of glenoid and humeral bone loss and rotator cuff tears. A whole section is then dedicated to various commercial devices with descriptive expert analysis of the design and implementation of each. An examination of the current economic value of RSA, including cost effectiveness and expected cost outcomes, comprises the final section. Reverse Shoulder Arthroplasty can therefore be read either from start to finish, allowing orthopedic surgeons to appreciate the various perspectives offered, or by selecting specific topics of interest much like a “how-to manual” of either a particular device design or the treatment of a specific pathology.

This handbook fully investigates reverse shoulder arthroplasty (RSA), presenting all the recent advances in the field to enable shoulder surgeons to treat patients with complex conditions, such as rotator cuff tears and instability, failed surgery and combined arthritis, or proximal humerus neoplasia. Reverse shoulder arthroplasty is becoming increasingly common because conventional total shoulder replacement may cause pain, loss of strength, simple or complex disabilities as well as limited motion, reducing general quality of life. The goal of a reverse prosthesis is to restore a painless, biomechanically valid joint. Drawing on the results of recent studies, the book covers all relevant aspects of RSA, including basic science, pathogenesis, clinical and instrumental evaluation, surgical techniques and complication management, helping readers to better understand when and how reverse shoulder arthroplasty should be implanted and what to do in cases of poor results. Written by leading shoulder specialists, the book provides surgeons and rehabilitation specialists, as well as residents and shoulder fellows, with a valuable, state-of-the-art guide for clinical practice.

Focused on the rapidly expanding field of reverse shoulder arthroplasty, Reverse Shoulder Arthroplasty: A Comprehensive Case-Based Approach is a detailed guide for shoulder surgeons. As this type of arthroplasty continues to grow globally, this text fills the need for a comprehensive and current book on this topic. This text is edited by Dr. Joseph Abboud, alongside co-editors Drs. Frankle, Romeo, Sanchez-Sotelo, Neyton, and Tashjian. With dozens of leading orthopedic shoulder surgeons as contributors, Reverse Shoulder Arthroplasty: A Comprehensive Case-Based Approach serves the needs of a broad audience of surgeons. This includes fellowship-trained shoulder surgeons, sports surgeons, generalists, traumatologists, hand surgeons, and orthopedic oncologists. The unique, case-based approach highlights the current and historic principles of reverse shoulder arthroplasty. Important featured topics in Reverse Shoulder Arthroplasty include: Relevant anatomy, indications, and surgical approaches Theory of design and its practical applications: materials used, base plate design, glenospheres, and humeral stems Primary reverse shoulder arthroplasty: RSA for several different indications, how experts perform the operation, and techniques utilized in certain cases Revision reverse shoulder arthroplasty: step-by-step approach, evaluation of infection, instability, managing bone loss, and more Miscellaneous topics: various approaches to rehabilitation, salvage options, and non-arthroplasty options for the rotator cuff deficient shoulder Video website access is included with purchase, providing additional audio-visual support to theories and principles discussed in each chapter by the world's leading experts. Reverse Shoulder Arthroplasty: A Comprehensive Case-Based Approach is a comprehensive and current guide intended to assist all levels of shoulder surgeons. This go-to resource will be a foundational asset to any surgeon in this expanding field.

The definitive book on reverse shoulder arthroplasty from leading orthopaedic shoulder surgeons This masterful book from top experts provides clinical insights on reverse shoulder arthroplasty gleaned from hands-on refinement of shoulder replacement techniques. Years of significant biomechanical and clinical research yielded invaluable knowledge that led to important improvements in functional outcome and implant durability. Among these refinements were stronger polyethylene derivatives, better ingrowth technology, and improved connection devices. As the durability and longevity of implant technology increased, younger active patients became suitable candidates for this procedure. In fact, RSA has played a pivotal role in making shoulder arthroplasty the fastest growing implant technology. In the first two sections, the authors take the reader through the history and evolution of RSA, followed by step-by-step surgical techniques for specific injuries and conditions. The next three sections discuss past and recent outcomes, complications, and rehabilitation. The last section covers special considerations including patient specific instrumentation, convertible humeral and glenoid components, and the future potential of stemless humeral technology. Key Features The latest trends in patient-specific components, guide systems, and instrument design The use of RSA for rotator cuff repair, shoulder arthritis, and acute and complex fractures In-depth discussion of techniques to improve deltoid function, avoid impingement, and increase implant longevity Clinical pearls on how to recognize and handle complications that occur: instability, infection, scapular notching, component loosening, glenoid and humeral bone loss, and RSA failure High quality videos and 300 superb illustrations further delineate techniques This book is a practical resource that enables learning complex procedures, putting them into practice, and handling complications should they arise. It is an essential tool for all orthopaedic surgeons who treat shoulder conditions.

Here is a technique intensive textbook of shoulder arthroplasty detailing how to handle all relevant aspects of shoulder replacement surgery. Distinguished shoulder surgeons Gary M. Gartsman—author of the well-received Shoulder Arthroscopy—and T. Bradley Edwards provide step-by-step details for each category of shoulder arthroplasty, covering indications and contraindications, pre-operative planning and imaging, results and complications, and more. Copious color intraoperative photographs and illustrations make this book one that all shoulder surgeons need to have at hand! Presents the personal techniques of two master surgeons to give you the benefit of an authoritative approach to challenging surgeries as well as a consistent tone throughout the book. Covers pre-operative planning and surgical techniques in meticulous detail, including Glenoid Component, Reduction/Deltoid Tensioning, Humeral Surface Replacement, and Biological Glenoid Resurfacing. Emphasizes results, complications, and the important topic of post-operative orthosis and rehabilitation to provide a timely focus on outcomes, a rapidly growing trend in orthopaedic surgery. Features intraoperative photographs accompanied by line drawings for added clarification of the procedures. Organizes material in a consistent, structured format for easier use of the text as a technical reference.

Covering every aspect of shoulder arthroplasty from initial assessment to comprehensive postoperative rehabilitation, Shoulder Arthroplasty: Principles and Practice, provides highly illustrated, authoritative guidance on the fastest growing arthroplasty procedure. Dr. Joseph Zuckerman, former president of the American Shoulder and Elbow Surgeons and the American Academy of Orthopaedic Surgeons, has assembled a team of world-renowned contributing authors who clearly explain and demonstrate—in print and in video—the techniques they utilize to achieve successful outcomes. This one-stop reference is an ideal resource for surgeons at all levels of experience who wish to further enhance their ability to perform shoulder replacement.

This masterful book from top experts provides clinical insights on reverse shoulder arthroplasty gleaned from hands-on refinement of shoulder replacement techniques. Years of significant biomechanical and clinical research yielded invaluable knowledge that led to important improvements in functional outcome and implant durability. Among these refinements were stronger polyethylene derivatives, better ingrowth technology, and improved connection devices. As the durability and longevity of implant technology increased, younger active patients became suitable candidates for this procedure. In fact, RSA has played a pivotal role in making shoulder arthroplasty the fastest growing implant technology. In the first two sections, the authors take the reader through the history and evolution of RSA, followed by step-by-step surgical techniques for specific injuries and conditions. The next three sections discuss past and recent outcomes, complications, and rehabilitation. The last section covers special considerations including patient specific instrumentation, convertible humeral and glenoid components, and the future potential of stemless humeral technology. Key Features The latest trends in patient-specific components, guide systems, and instrument design The use of RSA for rotator cuff repair, shoulder arthritis, and acute and complex fractures In-depth discussion of techniques to improve deltoid function, avoid impingement, and increase implant longevity Clinical pearls on how to recognize and handle complications that occur: instability, infection, scapular notching, component loosening, glenoid and humeral bone loss, and RSA failure High quality videos and 300 superb illustrations further delineate techniques This book is a practical resource that enables learning complex procedures, putting them into practice, and handling complications should they arise. It is an essential tool for all orthopaedic surgeons who treat shoulder conditions.

Success in shoulder arthroplastic surgery is not necessarily dependent only on the principle of construction of a prosthetic device, nor on the way this device is implanted or fixed to the bony interface, but more so on the understanding and handling of the soft tissues surrounding the articulation. Based on their experience in basic anatomy and function, the editors of this book were able to develop a prosthetic device which can take into account individual anatomical variations in each patient, making a successful outcome of surgery much more predictable. This must-have for any shoulder surgeon not only informs on the current state-of-the-art, but also provides an understanding of what advances can be achieved with innovative thinking in the field of orthopaedic surgery.