Rubber Injection Moulding 2000 Today S Technology

Injection moulding of elastomers for mass produced products, such as those for the automotive industries, is a critical process for rubber product manufacturers. Proces sing equipment and materials are continuously under development for the application. This conference addressed the advances that have been made. The conference proceedings will be of importance to rubber processors, materials suppliers, compounders and end-users alike. The papers discuss developments that are currently available to optimise production from the injection moulding process along with new techniques, materials and equipment.

This review first discusses mould release and then addresses mould fouling. Significant material and process variables are considered first and then practical guidance on the selection of release agents and surface treatments are addressed. This is followed by advice on mould cleaning and the assessment of mould sticking and mould fouling. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.

This review has been written as a practical guide to rubber injection moulding. Many injection moulding processes produce rejects or scrap, because they depend on a b257 of variables. To eliminate waste it is necessary to learn how to recognise the variables that cause problems, and then experiment to understand their interdependence. This can be developed to a fine art and lead towards 'right first time' processing, the commercial ideal. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.

Many variations of injection moulding have been developed and one of the rapidly expanding fields is multi-material injection moulding. This review looks at the many techniques being used, from the terminology to case studies. The three primary types of multi-material injection moulding examined are multi-component, multi-shot and over-moulding. The basic types of multi-material injection moulding, the issues surrounding combining different types of polymers and examples of practical uses of this technology are described.

This book is aimed at potential customers and personnel in the injection moulding industry, and emphasises quality control, including working to the ISO 9001 Standard. It also highlights the need to consider the economics of operation prior to taking on new projects. Above all, the customer-manufacturer relationship is emphasised at all stages. The customer is encouraged to examine the capabilities of the manufacturer, and the manufacturer is encouraged to develop a good understanding of the exact requirements of the customer. This book is of value to all areas of a company, from those who purchase raw materials to those working in design, technology and production. It will provide a guide for automotive component buyers and should also be useful to a CEO or board member who is new to the industry.

There are few complete technical sources of information available for plastic injection moulders to use relating to automation. This review has been compiled by researching and analysing technical references. It is intended to describe the basics of the technology and to explain how to put the technology to use. The review is supplemented by an indexed section containing several hundred abstracts from the Polymer Library.

This review outlines each technique used in rubber analysis and then illustrates which methods are applied to determine which facts. This d104 is a good introduction to a very complex subject area and will enable the reader to understand the basic concepts of rubber analysis. Around 350 abstracts from the Rapra Polymer Library database accompany this review, to facilitate further reading. These include core original references together with abstracts from some of the latest papers on rubber analysis.