Securing Your Scada And Industrial Control Systems

Version 1.0. This guidebook provides information for enhancing the security of Supervisory Control and Data Acquisition Systems (SCADA) and Industrial Control Systems (ICS). The information is a comprehensive overview of industrial control system security, including administrative controls, architecture design, and security technology. This is a guide for enhancing security, not a how-to manual for building an ICS, and its purpose is to teach ICS managers, administrators, operators, engineers, and other ICS staff what security concerns they should be taking into account. Other related products: National Response Framework, 2008 is available here: https://bookstore.gpo.gov/products/sku/064-000-00044-6 National Strategy for Homeland Security (October 2007) is available here: https://bookstore.gpo.gov/products/sku/041-001-00657-5 New Era of Responsibility: Renewing America's Promise can be found here: https://bookstore.gpo.gov/products/sku/041-001-00660-5

As the sophistication of cyber-attacks increases, understanding how to defend critical infrastructure systems—energy production, water, gas, and other vital systems—becomes more important, and heavily mandated. Industrial Network Security, Second Edition arms you with the knowledge you need to understand the vulnerabilities of these distributed supervisory and control systems. The book examines the unique protocols and applications that are the foundation of industrial control systems, and provides clear guidelines for their protection. This how-to guide gives you thorough understanding of the unique challenges facing critical infrastructures, new guidelines and security measures for critical infrastructure protection, knowledge of new and evolving security tools, and pointers on SCADA protocols and security implementation. All-new real-world examples of attacks against control systems, and more diagrams of systems Expanded coverage of protocols such as 61850, Ethernet/IP, CIP, ISA-99, and the evolution to IEC62443 Expanded coverage of Smart Grid security New coverage of signature-based detection, exploit-based vs. vulnerability-based detection, and signature reverse engineering

This book provides a comprehensive overview of the key concerns as well as research challenges in designing secure and resilient Industrial Control Systems (ICS). It will discuss today's state of the art security architectures and couple it with near and long term research needs that compare to the baseline. It will also establish all discussions to generic reference architecture for ICS that reflects and protects high consequence scenarios. Significant strides have been made in making industrial control systems secure. However, increasing connectivity of ICS systems with commodity IT devices and significant human interaction of ICS systems during its operation regularly introduces newer threats to these systems resulting in ICS security defenses always playing catch-up. There is an emerging consensus that it is very important for ICS missions to survive cyber-attacks as well as failures and continue to maintain a certain level and quality of service. Such resilient ICS design requires one to be proactive in understanding and reasoning about evolving threats to ICS components, their potential effects on the ICS mission’s survivability goals, and identify ways to design secure resilient ICS systems. This book targets primarily educators and researchers working in the area of ICS and Supervisory Control And Data Acquisition (SCADA) systems security and resiliency. Practitioners responsible for security deployment, management and governance in ICS and SCADA systems would also find this book useful. Graduate students will find this book to be a good starting point for research in this area and a reference source.

Industrial Network Security: Securing Critical Infrastructure Networks for Smart Grid, SCADA, and Other Industrial Control Systems describes an approach to ensure the security of industrial networks by taking into account the unique network, protocol, and application characteristics of an industrial control system, along with various compliance controls. It offers guidance on deployment and configuration, and it explains why, where, and how security controls should be implemented. Divided into 11 chapters, the book explains the basics of Ethernet and Transmission Control Protocol/Internet Protocol (TCP/IP) networking communications and the SCADA and field bus protocols. It also discusses industrial networks as they relate to “critical infrastructure and cyber security, potential risks and consequences of a cyber attack against an industrial control system, compliance controls in relation to network security practices, industrial network protocols, such as Modbus and DNP3, assessment of vulnerabilities and risk, how to secure enclaves, regulatory compliance standards applicable to industrial network security, and common pitfalls and mistakes, like complacency and deployment errors. This book is a valuable resource for plant operators and information security analysts, as well as compliance officers who want to pass an audit with minimal penalties and/or fines. Covers implementation guidelines for security measures of critical infrastructure Applies the security measures for system-specific compliance Discusses common pitfalls and mistakes and how to avoid them

Aimed at both the novice and expert in IT security and industrial control systems (ICS), this book will help readers gain a better understanding of protecting ICSs from electronic threats. Cyber security is getting much more attention and "SCADA security" (Supervisory Control and Data Acquisition) is a particularly important part of this field, as are Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), Intelligent Electronic Devices (IEDs), and all the other, field controllers, sensors, drives, and emission controls that make up the "intelligence" of modern industrial buildings and facilities. Some Key Features include: How to better understand the convergence between Industrial Control Systems (ICS) and general IT systems Insight into educational needs and certifications How to conduct Risk and Vulnerability Assessments Descriptions and observations from malicious and unintentional ICS cyber incidents Recommendations for securing ICS

As industrial control systems (ICS), including SCADA, DCS, and other process control networks, become Internet-facing, they expose crucial services to attack. Threats like Duqu, a sophisticated worm found in the wild that appeared to share portions of its code with the Stuxnet worm, emerge with increasing frequency. Explaining how to develop and im

Your one-step guide to understanding industrial cyber security, its control systems, and its operations. About This Book Learn about endpoint protection such as anti-malware implementation, updating, monitoring, and sanitizing user workloads and mobile devices Filled with practical examples to help you secure critical infrastructure systems efficiently A step-by-step guide that will teach you the techniques and methodologies of building robust infrastructure systems Who This Book Is For If you are a security professional and want to ensure a robust environment for critical infrastructure systems, this book is for you. IT professionals interested in getting into the cyber security domain or who are looking at gaining industrial cyber security certifications will also find this book useful. What You Will Learn Understand industrial cybersecurity, its control systems and operations Design security-oriented architectures, network segmentation, and security support services Configure event monitoring systems, anti-malware applications, and endpoint security Gain knowledge of ICS risks, threat detection, and access management Learn about patch management and life cycle management Secure your industrial control systems from design through retirement In Detail With industries expanding, cyber attacks have increased significantly. Understanding your control system's vulnerabilities and learning techniques to defend critical infrastructure systems from cyber threats is increasingly important. With the help of real-world use cases, this book will teach you the methodologies and security measures necessary to protect critical infrastructure systems and will get you up to speed with identifying unique challenges.Industrial cybersecurity begins by introducing Industrial Control System (ICS) technology, including ICS architectures, communication media, and protocols. This is followed by a presentation on ICS (in) security. After presenting an ICS-related attack scenario, securing of the ICS is discussed, including topics such as network segmentation, defense-in-depth strategies, and protective solutions. Along with practical examples for protecting industrial control systems, this book details security assessments, risk management, and security program development. It also covers essential cybersecurity aspects, such as threat detection and access management. Topics related to endpoint hardening such as monitoring, updating, and anti-malware implementations are also discussed. Style and approach A step-by-step guide to implement Industrial Cyber Security effectively.