Sensorless Ac Electric Motor Control

This monograph shows the reader how to avoid the burdens of sensor cost, reduced internal physical space, and system complexity in the control of AC motors. Many applications fields—electric vehicles, wind- and wave-energy converters and robotics, among them—will benefit. Sensorless AC Electric Motor Control describes the elimination of physical sensors and their replacement with observers, i.e., software sensors. Robustness is introduced to overcome problems associated with the unavoidable imperfection of knowledge of machine parameters—resistance, inertia, and so on—encountered in real systems. The details of a large number of speed- and/or position-sensorless ideas for different types of permanent-magnet synchronous motors and induction motors are presented along with several novel observer designs for electrical machines. Control strategies are developed using high-order, sliding-mode and quasi-continuous-sliding-mode techniques and two types of observer–controller schemes based on backstepping and sliding-mode techniques are described. Experimental results validate the performance of these observer and controller configurations with test trajectories of significance in difficult sensorless-AC-machine problems. Control engineers working with AC motors in a variety of industrial environments will find the space-and-cost-saving ideas detailed in Sensorless AC Electric Motor Control of much interest. Academic researchers and graduate students from electrical, mechanical and control-engineering backgrounds will be able to see how advanced theoretical control can be applied in meaningful real systems.

The complexity of AC motor control lies in the multivariable and nonlinear nature of AC machine dynamics. Recent advancements in control theory now make it possible to deal with long-standing problems in AC motors control. This text expertly draws on these developments to apply a wide range of model-based control designmethods to a variety of AC motors. Contributions from over thirty top researchers explain how modern control design methods can be used to achieve tight speed regulation, optimal energetic efficiency, and operation reliability and safety, by considering online state variable estimation in the absence of mechanical sensors, power factor correction, machine flux optimization, fault detection and isolation, and fault tolerant control. Describing the complete control approach, both controller and observer designs are demonstrated using advanced nonlinear methods, stability and performance are analysed using powerful techniques, including implementation considerations using digital computing means. Other key features: • Covers the main types of AC motors including triphase, multiphase, and doubly fed induction motors, wound rotor, permanent magnet, and interior PM synchronous motors • Illustrates the usefulness of the advanced control methods via industrial applications including electric vehicles, high speed trains, steel mills, and more • Includes special focus on sensorless nonlinear observers, adaptive and robust nonlinear controllers, output-feedback controllers, fault detection and isolation algorithms, and fault tolerant controllers This comprehensive volume provides researchers and designers and R&D engineers with a single-source reference on AC motor system drives in the automotive and transportation industry. It will also appeal to advanced students in automatic control, electrical, power systems, mechanical engineering and robotics, as well as mechatronic, process, and applied control system engineers.

Motor control technology continues to play a vital role in the initiative to eliminate or at least decrease petroleum dependency and greenhouse gas emissions around the world. Increased motor efficiency is a crucial aspect of this science in the global transition to clean power use in areas such as industrial applications and home appliances—but particularly in the design of vehicles. Summarizes the evolution of motor driving units toward high efficiency, low cost, high power density, and flexible interface with other components AC Motor Control and Electric Vehicle Applications addresses the topics mentioned in its title but also elaborates on motor design perspective, such as back EMF harmonics, loss, flux saturation, and reluctance torque, etc. Maintaining theoretical integrity in AC motor modeling and control throughout, the author focuses on the benefits and simplicity of the rotor field-oriented control, describing the basics of PWM, inverter, and sensors. He also clarifies the fundamentals of electric vehicles and their associated dynamics, motor issues, and battery limits. A powerful compendium of practical information, this book serves as an overall useful tool for the design and control of high-efficiency motors.

Inhalt: The purpose of this book is to review the various schemes and methodologies used for speed sensorless operation of induction motors an position sensorless operation of permanent magnet, synchronous reluctance, and switched reluctance motors. Various sensorless control strategies are reviewed based on the papers published in IEEE transactions and conferences and in other international journals.

AC Motor Control and Electrical Vehicle Applications provides a guide to the control of AC motors with a focus on its application to electric vehicles (EV). It describes the rotating magnetic flux, based on which dynamic equations are derived. The text not only deals with the induction motor, but covers the permanent magnet synchronous motors (PMSM). Additionally, the control issues are discussed by taking into account the limitations of voltage and current. The latest edition includes more experimental data and expands upon the topics of inverter, pulse width modulation methods, loss minimizing control, and vehicle dynamics. Various EV motor design issues are also reviewed, while comparing typical types of PMSMs. Features Considers complete dynamic modeling of induction and PMSM in the rotating frame. Provides various field-oriented controls, while covering advanced topics in PMSM high speed control, loss minimizing control, and sensorless control. Covers inverter, sensors, vehicle dynamics, driving cycles, etc., not just motor control itself. Offers a comparison between BLDC, surface PMSM, and interior PMSM. Discusses how the motor produces torque and is controlled based on consistent mathematical treatments.

Electric Motor Control: DC, AC, and BLDC Motors introduces practical drive techniques of electric motors to enable stable and efficient control of many application systems, also covering basic principles of high-performance motor control techniques, driving methods, control theories and power converters. Electric motor drive systems play a critical role in home appliances, motor vehicles, robotics, aerospace and transportation, heating ventilating and cooling equipment’s, robotics, industrial machinery and other commercial applications. The book provides engineers with drive techniques that will help them develop motor drive system for their applications. Includes practical solutions and control techniques for industrial motor drive applications currently in use Contains MATLAB/Simulink simulation files Enables engineers to understand the applications and advantages of electric motor drive systems

The complexity of AC motor control lies in the multivariable and nonlinear nature of AC machine dynamics. Recent advancements in control theory now make it possible to deal with long-standing problems in AC motors control. This text expertly draws on these developments to apply a wide range of model-based control designmethods to a variety of AC motors. Contributions from over thirty top researchers explain how modern control design methods can be used to achieve tight speed regulation, optimal energetic efficiency, and operation reliability and safety, by considering online state variable estimation in the absence of mechanical sensors, power factor correction, machine flux optimization, fault detection and isolation, and fault tolerant control. Describing the complete control approach, both controller and observer designs are demonstrated using advanced nonlinear methods, stability and performance are analysed using powerful techniques, including implementation considerations using digital computing means. Other key features: • Covers the main types of AC motors including triphase, multiphase, and doubly fed induction motors, wound rotor, permanent magnet, and interior PM synchronous motors • Illustrates the usefulness of the advanced control methods via industrial applications including electric vehicles, high speed trains, steel mills, and more • Includes special focus on sensorless nonlinear observers, adaptive and robust nonlinear controllers, output-feedback controllers, fault detection and isolation algorithms, and fault tolerant controllers This comprehensive volume provides researchers and designers and R&D engineers with a single-source reference on AC motor system drives in the automotive and transportation industry. It will also appeal to advanced students in automatic control, electrical, power systems, mechanical engineering and robotics, as well as mechatronic, process, and applied control system engineers.

This book discusses the current status of the solid-state AC motor controls. It treats most technical phenomena in the empirical sense, with emphasis on input-output characteristics of solid-state controls, oriented at all times to their effect on the performance of the AC motor.