Sewer Networks And Processes Within Urban Water Systems

The papers in this volume were originally presented at the 18th European Junior Scientists Workshop (EJSW), Portugal, on 8-11 November 2003 and at the 1st Asian Junior Scientists Workshop (AJSW), Malaysia, on 7-10 February 2004. The workshops were organised by the SS&PWG (Sewer Systems and Processes Working Group) of the IWA/IAHR Joint Committee on Urban Drainage. The two separate workshops were convened under the general themes of "Sewer Processes, Networks and Urban Drainage" and specific topics covered included integrated modelling of urban water systems; modelling of pollutant loads; calibration of models; bed-load transport; sewer pipe roughness; advection in sewers; anoxic processes; infiltration and exfiltration; runoff source control; pollutant loads; ventilation and oxygen uptake. From the 37 full papers presented at the two workshops, 16 papers have been selected by independent reviewers from the SS&PWG for publication in Sewer Networks and Processes within Urban Water Systems. They reflect rather well the variety of topics presented during both workshops, and bring the high-quality work of these junior authors to the wider audience it merits.

Sewer systems constitute a very significant heritage in European cities. Their structural quality and functional efficiency are key parameters to guarantee the transfer of domestic and industrial wastewater to treatment plants without infiltration nor exfiltration. Infiltration of groundwater is particularly detrimental to treatment plant efficiency, while exfiltration of wastewater can lead to groundwater contamination. The European research project APUSS (Assessing infiltration and exfiltration on the Performance of Urban Sewer Systems) was devoted to sewer infiltration and exfiltration questions. It was structured in three main Work Areas dealing respectively with i) the development of new measurement methods based on tracer experiments and accounting for detailed uncertainty analyses, ii) the implementation of models and software tools to integrate structural and experimental data and to facilitate data display, operational management and decision-making processes and iii) the integration of economic and operational questions by means of cost estimation, economic evaluation, performance indicators and multi-criteria methods applied to investment/rehabilitation strategies. This final report describes the objectives, methods and main results for each Work Area. References to detailed methods, protocols, reports and tools are given in this final report which will be an invaluable source of information for all those concerned with the performance of urban sewer systems.

This book is an introduction to hydroinformatics applied to urban water management. It shows how to make the best use of information and communication technologies for manipulating information to manage water in the urban environment. The book covers the acquisition and analysis of data from urban water systems to instantiate mathematical models or calculations, which describe identified physical processes. The models are operated within prescribed management procedures to inform decision makers, who are responsible to recognized stakeholders. The application is to the major components of the urban water environment, namely water supply, treatment and distribution, wastewater and stormwater collection, treatment and impact on receiving waters, and groundwater and urban flooding. Urban Hydroinformatics pays particular attention to modeling, decision support through procedures, economics and management, and implementation in both developed and developing countries. The book is written with post-graduates, researchers and practicing engineers who are involved in urban water management and want to improve the scope and reliability of their systems.

Urban Water II is the proceedings of the 2nd International Conference on the Design, Construction, Maintenance, Monitoring and Control of Urban Water Systems. The meeting was reconvened following the success of the first conference held in the New Forest, home to the Wessex Institute of Technology in 2012. Water systems in the urban environment consist of supply networks as well as sewage and storm drainage systems. They interact with each other and with warm bodies such as rivers, lakes and aquifers, and this interaction affects the quality and quantity of the different systems. As our cities continue to expand, their urban infrastructure must be re-evaluated and adapted to new requirements related to the increase in population and the growing areas under urbanisation. New water systems are also required to reduce the risk associated with floods, network failures and many others related to inadequate networks. New systems should reduce economic losses and environmental impacts as well as promote a higher degree of reliability. Improved management, measurement and control mechanisms are needed to ensure the efficiency and safety of urban water systems. Topics such as contamination and pollution discharges in urban water bodies, as well as the monitoring of water recycling systems are currently receiving a great deal of attention from researchers and professional engineers working in the water industry. Architects and town planners are also aware of the importance of the interaction between urban water cycles and city planning and landscaping. Management of all these aspects requires the development of specialised computer tools that can respond to the increased complexity of urban water systems. Relating to the subject areas of Water supply networks and Urban Drainage, topics covered include: Leakage and losses; Modelling and experimentation; Safety and security of water systems; Maintenance and repairs; Water quality; Water savings and reuse; Surface water and groundwater sources; Reservoirs; Network design; Waste water treatment and disposal; Structural works and infrastructure; Water quality issues; Combined sewer networks; Flood control; Storage tanks; Environmental impact; Domestic and industrial waste water issues.

This book addresses the latest research advances, innovations, and applications in the field of urban drainage and water management as presented by leading researchers, scientists and practitioners from around the world at the 11th International Conference on Urban Drainage Modelling (UDM), held in Palermo, Italy from 23 to 26 September, 2018. The conference was promoted and organized by the University of Palermo, Italy and the International Working Group on Data and Models, with the support of four of the world’s leading organizations in the water sector: the International Water Association (IWA), International Association for Hydro-Environment Engineering and Research (IAHR), Environmental & Water Resources Institute (EWRI) - ASCE, and the International Environmental Modelling and Software Society (iEMSs). The topics covered are highly diverse and include drainage and impact mitigation, water quality, rainfall in urban areas, urban hydrologic and hydraulic processes, tools, techniques and analysis in urban drainage modelling, modelling interactions and integrated systems, transport and sewer processes (incl. micropollutants and pathogens), and water management and climate change. The conference’s primary goal is to offer a forum for promoting discussions amongst scientists and professionals on the interrelationships between the entire water cycle, environment and society.

Maintenance, Monitoring and Control of Urban Water Systems, held in The New Forest, UK, April 25-27, 2012. The papers presented at the conference include topics such as contamination and pollution discharges in urban water bodies, monitoring water recycling systems, managing interaction between urban water cycles and city planning and landscaping, computer tools that can respond to the increased complexity of urban water systems, legal and regulatory aspects, technical problems involving the design, construction, maintenance, monitoring and control of urban water systems. The book will be of interest to researchers and professional engineers working in the water industry, architects, town planners, and others concerned about urban water supplies.

Mathematical Modelling and Computer Simulation of Activated Sludge Systems – Second Edition provides, from the process engineering perspective, a comprehensive and up-to-date overview regarding various aspects of the mechanistic (“white box”) modelling and simulation of advanced activated sludge systems performing biological nutrient removal. In the new edition of the book, a special focus is given to nitrogen removal and the latest developments in modelling the innovative nitrogen removal processes. Furthermore, a new section on micropollutant removal has been added. The focus of modelling has been shifting in the last years to models that can describe the performance of a whole plant (plant-wide modelling). The expanded part of this new edition introduces models describing the most important processes interrelated with the mainstream activated sludge systems as well as models describing the energy balance, operating costs and environmental impact. The complex process evaluation, including minimization of energy consumption and carbon footprint, is in line with the present and future wastewater treatment goals. By combining a general introduction and a textbook, this book serves both intermediate and more experienced model users, both researchers and practitioners, as a comprehensive guide to modelling and simulation studies. The book can be used as a supplemental material at graduate and post-graduate levels of wastewater engineering/modelling courses.

This book is open access under a CC BY-NC 4.0 license. This revised, updated textbook presents a systems approach to the planning, management, and operation of water resources infrastructure in the environment. Previously published in 2005 by UNESCO and Deltares (Delft Hydraulics at the time), this new edition, written again with contributions from Jery R. Stedinger, Jozef P. M. Dijkman, and Monique T. Villars, is aimed equally at students and professionals. It introduces readers to the concept of viewing issues involving water resources as a system of multiple interacting components and scales. It offers guidelines for initiating and carrying out water resource system planning and management projects. It introduces alternative optimization, simulation, and statistical methods useful for project identification, design, siting, operation and evaluation and for studying post-planning issues. The authors cover both basin-wide and urban water issues and present ways of identifying and evaluating alternatives for addressing multiple-purpose and multi-objective water quantity and quality management challenges. Reinforced with cases studies, exercises, and media supplements throughout, the text is ideal for upper-level undergraduate and graduate courses in water resource planning and management as well as for practicing planners and engineers in the field.