Steel Will

On February 19, 2007, SSG Shilo Harris was patrolling an infamous southern Iraqi roadway when his Humvee was struck by an IED. Moments later, three members of his crew were dead and Shilo had sustained severe burns over 35 percent of his body, lost his ears and the skin off his face, and lost much of the use of his badly mangled fingers. This fiery moment was just the beginning of an arduous road laced with pain, emotional anguish, and much soul-searching. For forty-eight days Shilo lay trapped in a medically induced coma as his wife, unable to ease his suffering, had to come to grips with a man utterly changed. This is the story of a young boy raised in a small Texas town under the heavy yoke of a father struggling with the personal aftermath of his service in Vietnam. This is the story of the first human being to participate in extracellular stem cell regeneration to regrow lost body parts. This is the story of the survivor not only of an explosion but of more than sixty surgeries to restore both form and function to his broken body. This is the story of the wife who stood by his side, made hard decisions, and continues to support her husband through his struggles with PTSD. This is the story of a God who reshapes us into the people he wants us to be. And in that way, this is the story of all of us. Anyone whose life has been touched by tragedy and loss, especially military families dealing with PTSD, TBI, amputations, and other realities of wartime service, will find strength, encouragement, and inspiration in this moving memoir.

Henry Adams' Building Construction was first published in 1906. It was reprinted several times and revised in 1912 with the addition of 24 pages on reinforced concrete. Beautifully illustrated with over 2,300 engravings and twelve tinted plates, it is reprinted here, unabridged, for the first time in nearly one hundred years. Adams' work sits comfortably alongside the other great construction books of the period: "Rivingtons" (also facsimiled by Donhead) and "Mitchell's". The latter two were actually slightly earlier: "Rivingtons" had already reached its fifth edition by 1906, and "Mitchell's" was in its seventh. Nevertheless Adams was hugely popular, selling over 40,000 copies in its first decade. There seems to be little doubt that its great advantage over its rivals was its format: while the others consisted of several volumes, Adams covered everything in a single one. As such it was more popular with students of building construction preparing for their exams and no doubt they kept it at their side for reference throughout their working lives. Although a great deal has changed in building technology since 1906, there is still much to learn from this volume. Of course it will be particularly useful to those who own a building of the period or who are professionals charged with looking after such buildings. But for everyone it provides an invaluable insight into the thinking of the time and an extraordinary snapshot of building in the Edwardian era. Its great benefit is its clarity.

This publication is a two-yearly report on trends in the steelmaking capacity in economies that are not members of the OECD. This report examines the current steelmaking capacity of these economies and likely changes therein up to the year 2012.

This vintage book contains a complete guide to blacksmithing, with information on and instructions for the correct use of tools and equipment, horseshoeing, carriage and wagon building, and much more. With detailed illustrations and simple directions, this volume will be of considerable utility to novice metalworkers and farriers, and would make for a useful addition to collections of allied literature. Contents include: "The Forge-Forge and Blast, Spring Bellows, Care of Bellows, The Anvil, The Hammer, Other Tools", "Operations in Forging-The Fire, Flux, Degrees of Heat, Drawing Down, Set-off, Jumping or Up-setting, Shutting Together, Hardening Steel, Case-Hardening", "Horseshoeing-The Anatomy of the Horse's Foot-The Hoof in General, The Wall, The Sole, The White Line", et cetera. Many vintage books such as this are increasingly scarce and expensive. We are republishing this volume now in an affordable, modern edition complete with a specially commissioned new introduction on metalworking.

An in-depth exploration of the effects of different steels, heat treatments, and edge geometries on knife performance. This book provides ratings for toughness, edge retention, and corrosion resistance for all of the popular knife steels. Micrographs of over 50 steels. Specific recommended heat treatments for each steel. And answers to questions like: 1) Does a thinner or thicker edge last longer? 2) What heat treatment leads to the best performance? 3) Are there performance benefits to forging blades? 4) Should I use stainless or carbon steel? All of these questions and more are answered by a metallurgist who grew up around the knife industry.

Vols. 1-69 include more or less complete patent reports of the U. S. Patent Office for years 1825-59. Cf. Index to v. 1-120 of the Journal, p. [415]