Structural Foundation Designers Manual

This manual for civil and structural engineers aims to simplify as much as possible a complex subject which is often treated too theoretically, by explaining in a practical way how to provide uncomplicated, buildable and economical foundations. It explains simply, clearly and with numerous worked examples how economic foundation design is achieved. It deals with both straightforward and difficult sites, following the process through site investigation, foundation selection and, finally, design. The book: includes chapters on many aspects of foundation engineering that most other books avoid including filled and contaminated sites mining and other man-made conditions features a step-by-step procedure for the design of lightweight and flexible rafts, to fill the gap in guidance in this much neglected, yet extremely economical foundation solution concentrates on foundations for building structures rather than the larger civil engineering foundations includes many innovative and economic solutions developed and used by the authors’ practice but not often covered in other publications provides an extensive series of appendices as a valuable reference source. For the Second Edition the chapter on contaminated and derelict sites has been updated to take account of the latest guidelines on the subject, including BS 10175. Elsewhere, throughout the book, references have been updated to take account of the latest technical publications and relevant British Standards.

This manual for civil and structural engineers aims to simplify the design of structural foundations as much as possible. Structured around the typical design process – through site investigation, foundation selection and, finally, design – it explains clearly, with numerous worked examples, how economic foundation design can be achieved in both straightforward and difficult sites. Fully updated to ensure compliance with Eurocodes, the Structural Foundation Designers′ Manual: includes chapters on many aspects of foundation engineering that other books avoid, including filled and contaminated sites, and mining and other man–made conditions features a step–by–step procedure for the design of lightweight and flexible rafts, to fill the gap in guidance in this extremely economical foundation solution concentrates on foundations for building structures rather than the larger civil engineering foundations includes many innovative and economic solutions developed and used by the authors’ practice but not often covered in other publications provides an extensive series of appendices as a valuable reference source

This book is based on over 30 years intensive practical experience. As a designers' manual, its aim is to simplify as much as possible a complex subject which is often treated too theoretically, by providing simple, buildable and economical foundations. It explains simply, clearly and with numerous worked examples how economic foundation design is achieved. It deals with both straightforward and difficult sites, following the process through site investigation, foundation selection and, finally, design. The book includes chapters on many of the aspects of foundation engineering that most other books avoid, including filled and contaminated sites, mining and other man-made conditions that are all too frequently encountered. A step-by-step procedure for the design of lightweight and flexible rafts is provided to fill the gap in guidance on this much neglected, yet extremely economical foundation solution. The book concentrates on foundations for building structures rather than the larger civil engineering foundations and includes many innovative and economic solutions developed and used by the authors' practice but not often covered in other publications. An extensive series of appendices completes the book, providing a valuable source of reference. Written by practising engineers for practising engineers, it draws on Curtins' wide experience in the field and will be a worthy companion to their Structural Masonry Designers' Manual, also published by Blackwell Scientific Publications.

This book provides practical and buildable solutions for the design of foundations for housing and other low-rise buildings, especially those on abnormal or poor ground. A wealth of expert information and advice is brought together dealing with the key aspects a designer must consider in order to achieve effective and economic foundation designs. This second edition of Structural Foundations Manual for Low-Rise Buildings has been completely updated in line with the new government guidelines on contaminated land and brown-field sites. The book includes well-detailed design solutions and calculations, actual case histories, illustrations, design charts and check lists, making it a user-friendly reference for contractors, structural engineers, architects and students who have to deal with foundations for low-rise buildings on sites with difficult ground conditions.

This book provides practical and buildable solutions for the design of foundations for housing and other low-rise buildings, especially those on abnormal or poor ground. A wealth of expert information and advice is brought together dealing with the key aspects a designer must consider in order to achieve effective and economic foundation designs. This second edition of Structural Foundations Manual for Low-Rise Buildings has been completely updated in line with the new government guidelines on contaminated land and brown-field sites. The book includes well-detailed design solutions and calculations, actual case histories, illustrations, design charts and check lists, making it a user-friendly reference for contractors, structural engineers, architects and students who have to deal with foundations for low-rise buildings on sites with difficult ground conditions.

For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.

The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.